Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Convert your checklist into Mobile App
Convert your checklist into Mobile App
Blast Chiller Inspection App runs structured blast chiller inspections across every site. Inspectors complete forms on a phone or tablet, capture photo and voice evidence on each blast chiller, and raise corrective actions the moment something fails. Managers see blast chiller compliance status, open issues, and performance across every site in real time.
Blast Chiller Inspection App runs a structured blast inspection covering blast design, pattern, and drilling, explosive handling, storage, and accounting, charging, stemming, and tie-in, exclusion zone, guarding, and warnings, and misfire procedure and post-blast check, with a photo and a sign-off required on each point. Without a system, blast findings live on paper and in chat. A blast fault such as drilling or pattern deviation slips through. An audit then means rebuilding blast evidence from folders.
Blast Chiller Inspection App keeps one record per blast and per site, with photo evidence and a named sign-off. Each blast finding is tracked to verified closure. Shotfirers and blast engineers see blast completion and overdue actions across the food & beverage portfolio. Every blast record proves what was checked, when, and by whom.
A comprehensive inspection for food & beverage covers the key areas that affect cold-chain and FSSAI compliance. Inspect blast chillers with probe calibration, cycle verification, and refrigeration checks plus defect logging. Your inspection should include sections for blast chiller condition checks, evidence capture, pass/fail or scoring criteria, corrective action assignment, and sign-off, so that nothing is missed and every inspection finding is traceable.
A consistent routine keeps blast chiller inspections reliable across every site. Follow these steps to run an effective inspection:
A blast inspection covers blast design, pattern, and drilling, explosive handling, storage, and accounting, charging, stemming, and tie-in, exclusion zone, guarding, and warnings, misfire procedure and post-blast check, and vibration, air overpressure, and flyrock control. Shotfirers and blast engineers capture a photo and a reading on each blast point. They work offline where signal is poor, then sign the blast round off. So every blast record proves what was checked, when, and by whom.
Templates align to explosives regulations, quarry and mine blasting standards.
Build the blast chiller template with objective pass-fail criteria and schedule it to mobile teams.
Inspectors run the inspection, AI checks photos for low refrigerant, blocked filters, worn belts, fouled coils, and failed items raise corrective actions.
Dashboards built on verified blast chiller data reveal recurring patterns on the blast chiller across every site.
Everything your field team records during blast chiller inspection, from photos and voice notes to readings and sign-off, Inspectly360 turns into a finished report automatically. Faster, more accurate, and without the retyping.
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Inspectly360 integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
From data collection to compliance: see how teams use Inspectly360 for every use case.
Capture field data once with digital forms that work even offline.
Explore use caseRun standardized inspections with photos, scoring, and instant reports.
Explore use caseConduct structured audits with evidence trails and pass or fail scoring.
Explore use caseLog hazards, near misses, and safety checks from any job site.
Explore use caseCatch defects early with repeatable quality checks and sign off.
Explore use caseReport incidents in the moment with photos and follow up actions.
Explore use caseTrack assets, service history, and condition across every location.
Explore use caseRaise work orders and close out repairs with a full audit trail.
Explore use caseStay audit ready with logged checks, timestamps, and shareable reports.
Explore use caseBlast Chiller work breaks down the moment evidence leaves the form. These are the problems Blast Chiller Inspection App is built to remove, and what the team gets back when it does.
A blast chiller inspection is ticked off on a paper form. Weeks later someone asks whether the blast chiller was actually checked, and whether low refrigerant, blocked filters, worn belts, fouled coils were looked at. Nobody can say for certain the blast chiller passed.
Problem
Solution
Low refrigerant, blocked filters, worn belts, fouled coils on the blast chiller are fixed, then reappear weeks later. Each blast chiller defect is treated as fresh because nobody sees it is the third time this quarter. The blast chiller root cause is never addressed.
Problem
Solution
There is no live view of blast chiller status across sites. The first sign that something failed on the blast chiller is a client call or an incident, by which point the problem is already public.
Problem
Solution
Blast Chiller Inspection App runs a structured blast inspection covering blast design, pattern, and drilling, explosive handling, storage, and accounting, charging, stemming, and tie-in, exclusion zone, guarding, and warnings, and misfire procedure and post-blast check. Each blast point is captured on mobile with a photo and a reading. A named inspector then signs the blast round off before it can close. The same blast template runs on every site, giving shotfirers and blast engineers one standard. Every blast record proves what was checked, when, and by whom.
Blast inspection frequency depends on duty, risk, and your blast standard. Some blast checks are daily or pre-use. Others run weekly, monthly, or at a statutory interval. Blast Chiller Inspection App sets the blast cadence per site and reminds shotfirers and blast engineers before a round is due. It flags overdue blast checks automatically. Each blast round is timestamped and signed, so the schedule is provably kept. The app runs on iOS and Android and works the same way for every blast chiller inspector on the team.
The inspection targets the blast failures that matter most: drilling or pattern deviation, an explosive accounting discrepancy, poor stemming or tie-in, and an exclusion zone breach. Left unchecked, a blast fault such as drilling or pattern deviation causes real harm. It can mean downtime, a safety incident, or a failed blast audit. So every blast finding becomes an owned task with a deadline. It stays open until photo proof of the blast repair is reviewed. Repeat blast failures are flagged, so shotfirers and blast engineers fix the cause.
Blast Chiller Inspection App keeps blast checks aligned to explosives regulations, and quarry and mine blasting standards. The photos and readings each blast standard expects are required fields. So an incomplete blast check cannot close. A blast gap is caught before an assessor finds it. When a review is due, shotfirers and blast engineers export a branded blast pack built from blast pattern record, exclusion zone photo, and post-blast check note. So blast evidence stays defensible at any time. The app runs on iOS and Android and works the same way for every blast chiller inspector on the team.
Yes. Inspectors complete blast checks on iOS or Android with no signal. They capture blast pattern record, exclusion zone photo, and post-blast check note at the blast in the field. Each blast record syncs when the connection returns, with its timestamp intact. The same blast template runs on every site. So shotfirers and blast engineers get a live view of blast work that is complete, overdue, or failing per location. The app runs on iOS and Android and works the same way for every blast chiller inspector on the team.
Every blast inspection carries blast pattern record, exclusion zone photo, and post-blast check note, a GPS location, a timestamp, and a named sign-off. The blast evidence is captured on the round, not typed up later. So shotfirers and blast engineers show exactly what was checked on the blast, when, and by whom. When an assessor asks, that blast record exports in seconds. It comes out as a branded PDF or a searchable blast history. The app runs on iOS and Android and works the same way for every blast chiller inspector on the team.
Blast Chiller Inspection App works alongside your existing blast systems. Blast findings and readings flow into a CMMS, ERP, or asset register through the API. So those systems hold verified blast field data, not re-keyed notes. Blast Chiller Inspection App owns offline blast capture, photo evidence, and a fast blast pack from blast pattern record, exclusion zone photo, and post-blast check note. Teams add the blast inspection layer where the evidence is captured. The app runs on iOS and Android and works the same way for every blast chiller inspector on the team.
Explore other inspection and audit apps for food & beverage teams.
30 minutes. Your inspection workflow on screen.