Sprayer Audit App turns sprayer audits into a scored, repeatable programme. Auditors score each sprayer against weighted criteria, attach photo evidence, and track corrective actions to verified closure across every site. Managers compare sprayer audit scores across sites and track every corrective action to closure.
Sprayer Audit App runs a scored sprayer audit covering tank, agitation, and induction, boom, nozzles, and even spray, pump, pressure, and calibration, filters, strainers, and lines, and controls and rate accuracy, with a photo and a sign-off required on each point. Without a system, sprayer findings live on paper and in chat. A sprayer fault such as blocked or worn nozzles and uneven spray slips through. An audit then means rebuilding sprayer evidence from folders.
Sprayer Audit App keeps one record per sprayer and per site, with photo evidence and a named sign-off. Each sprayer finding is tracked to verified closure. Farm spray operators see sprayer completion and overdue actions across the agriculture & agritech portfolio. Every sprayer record proves what was checked, when, and by whom.
What to Include in a Sprayer Audit App?
A comprehensive sprayer audit covers the key areas that affect operations and compliance. Audit sprayer programmes with weighted scoring, calibration evidence, and corrective actions. Your audit should include sections for tank, agitation, and induction; boom, nozzles, and even spray; and pump, pressure, and calibration, evidence capture, pass/fail or scoring criteria, corrective action assignment, and sign-off, so that nothing is missed and every audit finding is traceable.
How to Use Sprayer Audit App
A scored audit only helps if every auditor scores the same way. Follow these steps to run a sprayer audit:
Open the sprayer audit template, which carries weighted criteria and a scoring scheme.
Score each sprayer against the criteria and attach photo evidence for any non-conformance.
Let the app calculate the section and overall sprayer score so the site is comparable to others.
Raise a corrective action for each failed sprayer criterion with an owner and due date.
Sign off the sprayer audit. The scorecard and branded report generate automatically.
What Does a Sprayer Audit Cover?
A sprayer audit scores condition against chemical handling and application regulations and sprayer test standards, checking tank, agitation, and induction, boom, nozzles, and even spray, pump, pressure, and calibration, filters, strainers, and lines, controls and rate accuracy, and wash-down, PPE, and chemical handling. Each sprayer finding is logged with a photo, a severity, and the failing point. So the sprayer audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
Tank, agitation, and induction
Boom, nozzles, and even spray
Pump, pressure, and calibration
Filters, strainers, and lines
Controls and rate accuracy
Wash-down, PPE, and chemical handling
Common Defects It Surfaces
Blocked or worn nozzles and uneven spray
Pump or pressure faults
Calibration drift
Tank or line leaks
Chemical handling gaps
Evidence Captured
Nozzle spray pattern photo
Calibration check note
Tank and line photo
Templates align to chemical handling and application regulations, sprayer test standards.
How Sprayer Audit App Scores a Sprayer Audit
Step 1
Score Consistently
Weighted criteria are built into the sprayer audit template.
Step 2
Evidence Every Finding
Auditors attach photo proof for each sprayer non-conformance.
Step 3
Compare and Act
Scorecards rank sites and failed sprayer criteria become corrective actions.
See the AI Behind Sprayer Audit App
Everything your field team records during sprayer audit, from photos and voice notes to sign-off, InspectWrk turns into a finished report automatically. Faster, more accurate, and without the retyping.
Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Built to Handle Any Challenge
From data collection to compliance: see how teams use InspectWrk for every use case.
What Sprayer Teams Fix When Audits Are Scored the Same Way Everywhere
Sprayer work breaks down the moment evidence leaves the form. These are the problems Sprayer Audit App is built to remove, and what the team gets back when it does.
Assigned contractor signs off the sprayer fix, and nobody checks it
A defect on the sprayer is handed to assigned contractor. A week later the sprayer defect is marked closed. Whether the sprayer work was done well, badly, or at all, nobody has verified.
Problem
Assigned contractor marks work closed with no verification
Poor sprayer fixes are only found at the next inspection
No record of which sprayer partners actually perform
Solution
Closure photo required before any sprayer action is signed off
Assigned contractor performance scored on closure speed and re-opens
Re-opened sprayer actions linked back to the original finding
Sprayer data is scattered across spreadsheets, photos, and chat
Some sprayer records sit in Excel, some in a WhatsApp group, some in a folder of photos. There is no single source of truth for the sprayer, so every sprayer question takes an hour and three people to answer.
Problem
Sprayer records split across Excel, chat, and photo folders
No single trusted version of the sprayer record
Answering a simple sprayer question takes hours
Solution
One system of record for every sprayer check and finding
Every sprayer photo and action tied to its record
Search any site or sprayer and get an answer instantly
Every auditor scores the sprayer audit differently, so sites cannot be compared
One auditor is strict, another is lenient, and a third skips sections. The sprayer audit scores come back, but leadership cannot tell whether a low score means a weak site or a tough auditor.
Problem
Sprayer scoring depends on which auditor showed up
Sprayer sections get skipped with no record
Sprayer scores are not comparable across sites
Solution
Weighted sprayer criteria baked into the audit template
Mandatory sprayer sections, so nothing is skipped
Comparable sprayer scores that roll up across the estate
Frequently Asked Questions
What does Sprayer Audit App check on a sprayer audit?
Sprayer Audit App runs a scored sprayer audit against chemical handling and application regulations and sprayer test standards, checking tank, agitation, and induction, boom, nozzles, and even spray, pump, pressure, and calibration, filters, strainers, and lines, and controls and rate accuracy. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for farm spray operators rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
Which sprayer defects matter most, and what happens if they are missed?
The audit targets the sprayer failures that matter most: blocked or worn nozzles and uneven spray, pump or pressure faults, calibration drift, and tank or line leaks. Left unchecked, a fault such as blocked or worn nozzles and uneven spray can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so farm spray operators fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Sprayer Audit App support for sprayer work?
Sprayer Audit App keeps sprayer checks aligned to chemical handling and application regulations and sprayer test standards. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, farm spray operators pull the records for the site in scope with one search instead of rebuilding them from folders. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run sprayer checks offline and across multiple sites?
Yes. Sprayer Audit App is offline-first: teams complete sprayer checks on iOS or Android with no signal, capturing photos and the evidence each check requires in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So farm spray operators get a live view of what is complete, overdue, or failing per location, and a weak connection in a remote or low-signal area never costs a round or loses a photo.
What evidence proves a sprayer audit was completed?
Every completed sprayer audit carries nozzle spray pattern photo, calibration check note, and tank and line photo, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, farm spray operators can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Related Agriculture & AgriTech Apps
Explore other inspection and audit apps for agriculture & agritech teams.
