Working at Height Inspection Audit App turns working at height inspection audits into a scored, repeatable programme. Auditors score each work at height against weighted criteria, attach photo evidence, and track corrective actions to verified closure across every site. Managers compare working at height inspection audit scores across sites and track every corrective action to closure.
Working at Height Inspection Audit App runs a scored work at height audit covering access equipment selection and inspection tags, guardrails, toe boards, and edge protection, harness, lanyard, and anchor point condition, exclusion zone and dropped-object control, and rescue plan and rescue equipment on site, with a photo and a sign-off required on each point. Without a system, work at height findings live on paper and in chat. A work at height fault such as ladders or scaffolds used out of inspection date slips through. An audit then means rebuilding work at height evidence from folders.
Working at Height Inspection Audit App keeps one record per work at height and per site, with photo evidence and a named sign-off. Each work at height finding is tracked to verified closure. Height safety and HSE teams see work at height completion and overdue actions across the health & safety portfolio. Every work at height record proves what was checked, when, and by whom.
What to Include in a Working at Height Inspection Audit App?
A comprehensive work at height audit covers the key areas that affect operations and compliance. Audit working-at-height inspections with weighted scoring, photo evidence, and corrective action tracking across sites. Your audit should include sections for access equipment selection and inspection tags; guardrails, toe boards, and edge protection; and harness, lanyard, and anchor point condition, evidence capture, pass/fail or scoring criteria, corrective action assignment, and sign-off, so that nothing is missed and every audit finding is traceable.
How to Use Working at Height Inspection Audit App
A scored audit only helps if every auditor scores the same way. Follow these steps to run a working at height inspection audit:
Open the working at height inspection audit template, which carries weighted criteria and a scoring scheme.
Score each work at height against the criteria and attach photo evidence for any non-conformance.
Let the app calculate the section and overall working at height inspection score so the site is comparable to others.
Raise a corrective action for each failed working at height inspection criterion with an owner and due date.
Sign off the working at height inspection audit. The scorecard and branded report generate automatically.
What Does a Work at Height Audit Cover?
A work at height audit scores condition against work at height Regulations 2005, OSHA 1926 Subpart M, and manufacturer inspection schedule, checking access equipment selection and inspection tags, guardrails, toe boards, and edge protection, harness, lanyard, and anchor point condition, exclusion zone and dropped-object control, rescue plan and rescue equipment on site, and permit, competence, and weather limits. Each work at height finding is logged with a photo, a severity, and the failing point. So the work at height audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
Access equipment selection and inspection tags
Guardrails, toe boards, and edge protection
Harness, lanyard, and anchor point condition
Exclusion zone and dropped-object control
Rescue plan and rescue equipment on site
Permit, competence, and weather limits
Common Defects It Surfaces
Ladders or scaffolds used out of inspection date
Missing or incomplete edge protection
A harness worn without a suitable anchor
No rescue plan for a suspended worker
An unguarded fragile roof or opening
Evidence Captured
Scaffold tag photo
Harness and anchor photo
Permit and rescue plan record
Templates align to Work at Height Regulations 2005, OSHA 1926 Subpart M, manufacturer inspection schedule.
How Working at Height Inspection Audit App Scores a Working at Height Inspection Audit
Step 1
Score Consistently
Weighted criteria are built into the working at height inspection audit template.
Step 2
Evidence Every Finding
Auditors attach photo proof for each working at height inspection non-conformance.
Step 3
Compare and Act
Scorecards rank sites and failed working at height inspection criteria become corrective actions.
See the AI Behind Working at Height Inspection Audit App
Everything your field team records during working at height inspection audit, from photos and voice notes to sign-off, InspectWrk turns into a finished report automatically. Faster, more accurate, and without the retyping.
Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Built to Handle Any Challenge
From data collection to compliance: see how teams use InspectWrk for every use case.
What Working at Height Inspection Teams Fix When Audits Are Scored the Same Way Everywhere
Working at Height Inspection work breaks down the moment evidence leaves the form. These are the problems Working at Height Inspection Audit App is built to remove, and what the team gets back when it does.
Every auditor scores the working at height inspection audit differently, so sites cannot be compared
One auditor is strict, another is lenient, and a third skips sections. The working at height inspection audit scores come back, but leadership cannot tell whether a low score means a weak site or a tough auditor.
Problem
Working at Height Inspection scoring depends on which auditor showed up
Work at height sections get skipped with no record
Working at Height Inspection scores are not comparable across sites
Solution
Weighted working at height inspection criteria baked into the audit template
Mandatory work at height sections, so nothing is skipped
Comparable working at height inspection scores that roll up across the estate
Working at Height Inspection issues get logged, then quietly forgotten
A failed item is noted during a routine audit. Nobody owns it, no date is set, and the next audit finds the same problem on the same work at height. The working at height inspection issue is logged, not closed.
Problem
Failed working at height inspection items noted but never assigned to anyone
No due date on a work at height fix, so nothing is ever overdue
The work at height fix is marked done with no proof it happened
Solution
Every failed working at height inspection item becomes an owned corrective action
Closure needs a work at height verification photo before sign-off
Overdue actions escalate automatically
The working at height inspection report is still being assembled by hand
Someone spends Friday afternoon collecting working at height inspection photos, notes, and audit records into a report. By the time leadership reads it, the working at height inspection data is days old and the next problem is already live.
Problem
Working at Height Inspection reports compiled by hand from photos and notes
Leadership reads working at height inspection data that is already days old
Every working at height inspection report looks slightly different
Solution
Branded working at height inspection reports generate automatically per site and period
Scheduled working at height inspection reports reach managers before the morning meeting
One consistent working at height inspection report format across the estate
Frequently Asked Questions
What does Working at Height Inspection Audit App check on a work at height audit?
Working at Height Inspection Audit App runs a scored work at height audit against work at height Regulations 2005, OSHA 1926 Subpart M, and manufacturer inspection schedule, checking access equipment selection and inspection tags, guardrails, toe boards, and edge protection, harness, lanyard, and anchor point condition, exclusion zone and dropped-object control, and rescue plan and rescue equipment on site. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for height safety and HSE teams rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
Which work at height defects matter most, and what happens if they are missed?
The audit targets the work at height failures that matter most: ladders or scaffolds used out of inspection date, missing or incomplete edge protection, a harness worn without a suitable anchor, and no rescue plan for a suspended worker. Left unchecked, a fault such as ladders or scaffolds used out of inspection date can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so height safety and HSE teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Working at Height Inspection Audit App support for work at height work?
Working at Height Inspection Audit App keeps work at height checks aligned to work at height Regulations 2005, OSHA 1926 Subpart M, and manufacturer inspection schedule. The photos each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, height safety and HSE teams pull the records for the site in scope with one search instead of rebuilding them from folders. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run work at height checks offline and across multiple sites?
Yes. Working at Height Inspection Audit App is offline-first: teams complete work at height checks on iOS or Android with no signal, capturing photos and the evidence each check requires in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So height safety and HSE teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a remote or low-signal area never costs a round or loses a photo.
What evidence proves a work at height audit was completed?
Every completed work at height audit carries scaffold tag photo, harness and anchor photo, and permit and rescue plan record, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, height safety and HSE teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Related Health & Safety Apps
Explore other inspection and audit apps for health & safety teams.
