Antenna Audit App turns antenna audits into a scored, repeatable programme. Auditors score each antenna against weighted criteria, attach photo evidence, and track corrective actions to verified closure across every site. Managers compare antenna audit scores across sites and track every corrective action to closure.
Antenna Audit App runs a scored antenna audit covering mounting brackets and torque, azimuth, tilt, and alignment, connectors, jumpers, and weatherproofing, radome and element condition, and VSWR and return loss, with a photo and a sign-off required on each point. Without a system, antenna findings live on paper and in chat. An antenna fault such as loose or corroded mounts slips through. An audit then means rebuilding antenna evidence from folders.
Antenna Audit App keeps one record per antenna and per site, with photo evidence and a named sign-off. Each antenna finding is tracked to verified closure. Telecom RF and site teams see antenna completion and overdue actions across the information technology & telecommunications portfolio. Every antenna record proves what was checked, when, and by whom.
What to Include in an Antenna Audit App?
A comprehensive antenna audit covers the key areas that affect telecom and data centre uptime, safety, and compliance. Audit antenna installations and documentation with structured scoring and action tracking. Your audit should include sections for mounting brackets and torque; azimuth, tilt, and alignment; and connectors, jumpers, and weatherproofing, evidence capture, pass/fail or scoring criteria, corrective action assignment, and sign-off, so that nothing is missed and every audit finding is traceable.
How to Use Antenna Audit App
A scored audit only helps if every auditor scores the same way. Follow these steps to run an antenna audit:
Open the antenna audit template, which carries weighted criteria and a scoring scheme.
Score each antenna against the criteria and attach photo evidence for any non-conformance.
Let the app calculate the section and overall antenna score so the site is comparable to others.
Raise a corrective action for each failed antenna criterion with an owner and due date.
Sign off the antenna audit. The scorecard and branded report generate automatically.
What Does an Antenna Audit Cover?
An antenna audit scores condition against RF exposure limits and site safety standards, checking mounting brackets and torque, azimuth, tilt, and alignment, connectors, jumpers, and weatherproofing, radome and element condition, VSWR and return loss, and RF exposure zone and signage. Each antenna finding is logged with a photo, a severity, and the failing point. So the antenna audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
Mounting brackets and torque
Azimuth, tilt, and alignment
Connectors, jumpers, and weatherproofing
Radome and element condition
VSWR and return loss
RF exposure zone and signage
Common Defects It Surfaces
Loose or corroded mounts
Misaligned azimuth or tilt
Water ingress at connectors
Radome or element damage
High VSWR
Evidence Captured
Mounting and alignment photo
Connector weatherproofing photo
VSWR reading note
Templates align to RF exposure limits, site safety standards.
How Antenna Audit App Scores an Antenna Audit
Step 1
Score Consistently
Weighted criteria are built into the antenna audit template.
Step 2
Evidence Every Finding
Auditors attach photo proof for each antenna non-conformance.
Step 3
Compare and Act
Scorecards rank sites and failed antenna criteria become corrective actions.
See the AI Behind Antenna Audit App
Everything your field team records during antenna audit, from photos and voice notes to sign-off, InspectWrk turns into a finished report automatically. Faster, more accurate, and without the retyping.
Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Built to Handle Any Challenge
From data collection to compliance: see how teams use InspectWrk for every use case.
What Antenna Teams Fix When Audits Are Scored the Same Way Everywhere
Antenna work breaks down the moment evidence leaves the form. These are the problems Antenna Audit App is built to remove, and what the team gets back when it does.
You find out about an antenna problem from a complaint
There is no live view of antenna status across sites. The first sign that something failed on the antenna is a client call or an incident, by which point the problem is already public.
Problem
No live view of antenna status across sites
Antenna problems surface as complaints, not as data
Antenna risk is invisible until it becomes an incident
Solution
Live multi-site dashboard of antenna completion and open issues
Antenna risk scoring flags sites trending to failure
Configurable dashboards filter antenna results by site and date
Every auditor scores the antenna audit differently, so sites cannot be compared
One auditor is strict, another is lenient, and a third skips sections. The antenna audit scores come back, but leadership cannot tell whether a low score means a weak site or a tough auditor.
Problem
Antenna scoring depends on which auditor showed up
Antenna sections get skipped with no record
Antenna scores are not comparable across sites
Solution
Weighted antenna criteria baked into the audit template
Mandatory antenna sections, so nothing is skipped
Comparable antenna scores that roll up across the estate
The same antenna defect comes back every cycle
Loose or corroded mounts, misaligned azimuth or tilt, water ingress at connectors, radome or element damage on the antenna are fixed, then reappear weeks later. Each antenna defect is treated as fresh because nobody sees it is the third time this quarter. The antenna root cause is never addressed.
What does Antenna Audit App check on an antenna audit?
Antenna Audit App runs a scored antenna audit against RF exposure limits and site safety standards, checking mounting brackets and torque, azimuth, tilt, and alignment, connectors, jumpers, and weatherproofing, radome and element condition, and VSWR and return loss. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for telecom rf and site teams rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
Which antenna defects matter most, and what happens if they are missed?
The audit targets the antenna failures that matter most: loose or corroded mounts, misaligned azimuth or tilt, water ingress at connectors, and radome or element damage. Left unchecked, a fault such as loose or corroded mounts can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so telecom rf and site teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Antenna Audit App support for antenna work?
Antenna Audit App keeps antenna checks aligned to RF exposure limits and site safety standards. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, telecom rf and site teams pull the records for the site in scope with one search instead of rebuilding them from folders. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run antenna checks offline and across multiple sites?
Yes. Antenna Audit App is offline-first: teams complete antenna checks on iOS or Android with no signal, capturing photos and the evidence each check requires in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So telecom rf and site teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a remote or low-signal area never costs a round or loses a photo.
What evidence proves an antenna audit was completed?
Every completed antenna audit carries mounting and alignment photo, connector weatherproofing photo, and vswr reading note, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, telecom rf and site teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Related Information Technology & Telecommunications Apps
Explore other inspection and audit apps for information technology & telecommunications teams.
