Lathe Audit App turns lathe audits into a scored, repeatable programme. Auditors score each lathe against weighted criteria, attach photo evidence, and track corrective actions to verified closure across every site. Managers compare lathe audit scores across sites and track every corrective action to closure.
Lathe Audit App runs a scored lathe audit covering chuck, jaws, and guard interlock, slideways, backlash, and lubrication, spindle, bearings, and drive, coolant system and swarf management, and emergency stop and controls, with a photo and a sign-off required on each point. Without a system, lathe findings live on paper and in chat. A lathe fault such as chuck guard interlock defeat slips through. An audit then means rebuilding lathe evidence from folders.
Lathe Audit App keeps one record per lathe and per site, with photo evidence and a named sign-off. Each lathe finding is tracked to verified closure. Machine shop and maintenance teams see lathe completion and overdue actions across the manufacturing portfolio. Every lathe record proves what was checked, when, and by whom.
What to Include in a Lathe Audit App?
A comprehensive lathe audit covers the key areas that affect operations and compliance. Audit lathe operations with structured scoring, photo evidence, and corrective action tracking. Your audit should include sections for chuck, jaws, and guard interlock; slideways, backlash, and lubrication; and spindle, bearings, and drive, evidence capture, pass/fail or scoring criteria, corrective action assignment, and sign-off, so that nothing is missed and every audit finding is traceable.
How to Use Lathe Audit App
A scored audit only helps if every auditor scores the same way. Follow these steps to run a lathe audit:
Open the lathe audit template, which carries weighted criteria and a scoring scheme.
Score each lathe against the criteria and attach photo evidence for any non-conformance.
Let the app calculate the section and overall lathe score so the site is comparable to others.
Raise a corrective action for each failed lathe criterion with an owner and due date.
Sign off the lathe audit. The scorecard and branded report generate automatically.
What Does a Lathe Audit Cover?
A lathe audit scores condition against PUWER machinery guarding and electrical safety standards, checking chuck, jaws, and guard interlock, slideways, backlash, and lubrication, spindle, bearings, and drive, coolant system and swarf management, emergency stop and controls, and electrical safety and earthing. Each lathe finding is logged with a photo, a severity, and the failing point. So the lathe audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
Chuck, jaws, and guard interlock
Slideways, backlash, and lubrication
Spindle, bearings, and drive
Coolant system and swarf management
Emergency stop and controls
Electrical safety and earthing
Common Defects It Surfaces
Chuck guard interlock defeat
Worn slideways and backlash
Spindle bearing faults
Coolant or swarf hazards
Electrical safety faults
Evidence Captured
Chuck guard photo
Slideway condition photo
E-stop test note
Templates align to PUWER machinery guarding, electrical safety standards.
How Lathe Audit App Scores a Lathe Audit
Step 1
Score Consistently
Weighted criteria are built into the lathe audit template.
Step 2
Evidence Every Finding
Auditors attach photo proof for each lathe non-conformance.
Step 3
Compare and Act
Scorecards rank sites and failed lathe criteria become corrective actions.
See the AI Behind Lathe Audit App
Everything your field team records during lathe audit, from photos and voice notes to sign-off, InspectWrk turns into a finished report automatically. Faster, more accurate, and without the retyping.
Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Built to Handle Any Challenge
From data collection to compliance: see how teams use InspectWrk for every use case.
What Lathe Teams Fix When Audits Are Scored the Same Way Everywhere
Lathe work breaks down the moment evidence leaves the form. These are the problems Lathe Audit App is built to remove, and what the team gets back when it does.
Assigned contractor signs off the lathe fix, and nobody checks it
A defect on the lathe is handed to assigned contractor. A week later the lathe defect is marked closed. Whether the lathe work was done well, badly, or at all, nobody has verified.
Problem
Assigned contractor marks work closed with no verification
Poor lathe fixes are only found at the next inspection
No record of which lathe partners actually perform
Solution
Closure photo required before any lathe action is signed off
Assigned contractor performance scored on closure speed and re-opens
Re-opened lathe actions linked back to the original finding
You find out about a lathe problem from a complaint
There is no live view of lathe status across sites. The first sign that something failed on the lathe is a client call or an incident, by which point the problem is already public.
Problem
No live view of lathe status across sites
Lathe problems surface as complaints, not as data
Lathe risk is invisible until it becomes an incident
Solution
Live multi-site dashboard of lathe completion and open issues
Lathe risk scoring flags sites trending to failure
Configurable dashboards filter lathe results by site and date
Every auditor scores the lathe audit differently, so sites cannot be compared
One auditor is strict, another is lenient, and a third skips sections. The lathe audit scores come back, but leadership cannot tell whether a low score means a weak site or a tough auditor.
Problem
Lathe scoring depends on which auditor showed up
Lathe sections get skipped with no record
Lathe scores are not comparable across sites
Solution
Weighted lathe criteria baked into the audit template
Mandatory lathe sections, so nothing is skipped
Comparable lathe scores that roll up across the estate
Frequently Asked Questions
What does Lathe Audit App check on a lathe audit?
Lathe Audit App runs a scored lathe audit against PUWER machinery guarding and electrical safety standards, checking chuck, jaws, and guard interlock, slideways, backlash, and lubrication, spindle, bearings, and drive, coolant system and swarf management, and emergency stop and controls. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for machine shop and maintenance teams rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
Which lathe defects matter most, and what happens if they are missed?
The audit targets the lathe failures that matter most: chuck guard interlock defeat, worn slideways and backlash, spindle bearing faults, and coolant or swarf hazards. Left unchecked, a fault such as chuck guard interlock defeat can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so machine shop and maintenance teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Lathe Audit App support for lathe work?
Lathe Audit App keeps lathe checks aligned to PUWER machinery guarding and electrical safety standards. The photos each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, machine shop and maintenance teams pull the records for the site in scope with one search instead of rebuilding them from folders. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run lathe checks offline and across multiple sites?
Yes. Lathe Audit App is offline-first: teams complete lathe checks on iOS or Android with no signal, capturing photos and the evidence each check requires in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So machine shop and maintenance teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a remote or low-signal area never costs a round or loses a photo.
What evidence proves a lathe audit was completed?
Every completed lathe audit carries chuck guard photo, slideway condition photo, and e-stop test note, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, machine shop and maintenance teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Related Manufacturing Apps
Explore other inspection and audit apps for manufacturing teams.
