SCADA System Audit App turns SCADA system audits into a scored, repeatable programme. Auditors score each SCADA system against weighted criteria, attach photo evidence, and track corrective actions to verified closure across every site. Managers compare SCADA system audit scores across sites and track every corrective action to closure.
SCADA System Audit App runs a scored SCADA audit covering RTU and PLC status, communications and redundancy, alarms and setpoints, data logging and historian, and access control and cybersecurity, with a photo and a sign-off required on each point. Without a system, SCADA findings live on paper and in chat. A SCADA fault such as rtu or plc fault slips through. An audit then means rebuilding SCADA evidence from folders.
SCADA System Audit App keeps one record per SCADA and per site, with photo evidence and a named sign-off. Each SCADA finding is tracked to verified closure. Control and automation teams see SCADA completion and overdue actions across the energy & utilities portfolio. Every SCADA record proves what was checked, when, and by whom.
What to Include in a SCADA System Audit App?
A comprehensive SCADA audit covers the key areas that affect operations and compliance. Audit SCADA system programmes with weighted scoring, change evidence, and corrective action tracking. Your audit should include sections for RTU and PLC status, communications and redundancy, and alarms and setpoints, evidence capture, pass/fail or scoring criteria, corrective action assignment, and sign-off, so that nothing is missed and every audit finding is traceable.
How to Use SCADA System Audit App
A scored audit only helps if every auditor scores the same way. Follow these steps to run a SCADA system audit:
Open the SCADA system audit template, which carries weighted criteria and a scoring scheme.
Score each SCADA system against the criteria and attach photo evidence for any non-conformance.
Let the app calculate the section and overall SCADA system score so the site is comparable to others.
Raise a corrective action for each failed SCADA system criterion with an owner and due date.
Sign off the SCADA system audit. The scorecard and branded report generate automatically.
What Does a SCADA Audit Cover?
A SCADA audit scores condition against IEC 62443 and ISA-95, checking RTU and PLC status, communications and redundancy, alarms and setpoints, data logging and historian, and access control and cybersecurity. Each SCADA finding is logged with a photo, a severity, and the failing point. So the SCADA audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
RTU and PLC status
Communications and redundancy
Alarms and setpoints
Data logging and historian
Access control and cybersecurity
Common Defects It Surfaces
RTU or PLC fault
Comms loss or no redundancy
Alarm flood or wrong setpoint
Logging gap
Weak access control
Evidence Captured
System status screenshot
Alarm log note
Access record
Templates align to IEC 62443, ISA-95.
How SCADA System Audit App Scores a SCADA System Audit
Step 1
Score Consistently
Weighted criteria are built into the SCADA system audit template.
Step 2
Evidence Every Finding
Auditors attach photo proof for each SCADA system non-conformance.
Step 3
Compare and Act
Scorecards rank sites and failed SCADA system criteria become corrective actions.
See the AI Behind SCADA System Audit App
Everything your field team records during SCADA system audit, from photos and voice notes to sign-off, InspectWrk turns into a finished report automatically. Faster, more accurate, and without the retyping.
Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Built to Handle Any Challenge
From data collection to compliance: see how teams use InspectWrk for every use case.
What SCADA System Teams Fix When Audits Are Scored the Same Way Everywhere
SCADA System work breaks down the moment evidence leaves the form. These are the problems SCADA System Audit App is built to remove, and what the team gets back when it does.
The same SCADA system defect comes back every cycle
RTU or PLC fault, comms loss or no redundancy, alarm flood or wrong setpoint, logging gap on the SCADA system are fixed, then reappear weeks later. Each SCADA system defect is treated as fresh because nobody sees it is the third time this quarter. The SCADA system root cause is never addressed.
Problem
Repeat SCADA system defects treated as new every time
No history tying findings to the same SCADA system
Budget spent re-fixing the same SCADA system problem
Solution
Full defect history per SCADA system
Recurring issue detection flags repeat SCADA system problems
Root-cause SCADA system work prioritised by evidence
The SCADA system report is still being assembled by hand
Someone spends Friday afternoon collecting SCADA system photos, notes, and audit records into a report. By the time leadership reads it, the SCADA system data is days old and the next problem is already live.
Problem
SCADA System reports compiled by hand from photos and notes
Leadership reads SCADA system data that is already days old
Every SCADA system report looks slightly different
Solution
Branded SCADA system reports generate automatically per site and period
Scheduled SCADA system reports reach managers before the morning meeting
One consistent SCADA system report format across the estate
Every auditor scores the SCADA system audit differently, so sites cannot be compared
One auditor is strict, another is lenient, and a third skips sections. The SCADA system audit scores come back, but leadership cannot tell whether a low score means a weak site or a tough auditor.
Problem
SCADA System scoring depends on which auditor showed up
SCADA system sections get skipped with no record
SCADA System scores are not comparable across sites
Solution
Weighted SCADA system criteria baked into the audit template
Mandatory SCADA system sections, so nothing is skipped
Comparable SCADA system scores that roll up across the estate
Frequently Asked Questions
What does SCADA System Audit App check on a SCADA audit?
SCADA System Audit App runs a scored SCADA audit against IEC 62443 and ISA-95, checking RTU and PLC status, communications and redundancy, alarms and setpoints, data logging and historian, and access control and cybersecurity. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for control and automation teams rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
Which SCADA defects matter most, and what happens if they are missed?
The audit targets the SCADA failures that matter most: RTU or PLC fault, comms loss or no redundancy, alarm flood or wrong setpoint, and logging gap. Left unchecked, a fault such as rtu or plc fault can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so control and automation teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does SCADA System Audit App support for SCADA work?
SCADA System Audit App keeps SCADA checks aligned to IEC 62443 and ISA-95. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, control and automation teams pull the records for the site in scope with one search instead of rebuilding them from folders. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run SCADA checks offline and across multiple sites?
Yes. SCADA System Audit App is offline-first: teams complete SCADA checks on iOS or Android with no signal, capturing photos and the evidence each check requires in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So control and automation teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a remote or low-signal area never costs a round or loses a photo.
What evidence proves a SCADA audit was completed?
Every completed SCADA audit carries system status screenshot, alarm log note, and access record, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, control and automation teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Related Energy & Utilities Apps
Explore other inspection and audit apps for energy & utilities teams.
