Automatic Transfer Switch (ATS) Audit App turns automatic transfer switch (ats) audits into a scored, repeatable programme. Auditors score each transfer switch against weighted criteria, attach photo evidence, and track corrective actions to verified closure across every site. Managers compare automatic transfer switch (ats) audit scores across sites and track every corrective action to closure.
What is Automatic Transfer Switch (ATS) Audit App?
Automatic Transfer Switch (ATS) Audit App runs a scored transfer switch audit covering transfer and retransfer operation, contacts and terminals, controls, timers, and settings, control power and battery, and load test under transfer, with a photo and a sign-off required on each point. Without a system, transfer switch findings live on paper and in chat. A transfer switch fault such as failed or slow transfer slips through. An audit then means rebuilding transfer switch evidence from folders.
Automatic Transfer Switch (ATS) Audit App keeps one record per transfer switch and per site, with photo evidence and a named sign-off. Each transfer switch finding is tracked to verified closure. Electrical engineering teams see transfer switch completion and overdue actions across the facilities management portfolio. Every transfer switch record proves what was checked, when, and by whom.
What to Include in an Automatic Transfer Switch (ATS) Audit App?
A comprehensive transfer switch audit covers the key areas that affect operations and compliance. Audit automatic transfer switch programmes with weighted scoring and corrective action tracking. Your audit should include sections for transfer and retransfer operation; contacts and terminals; and controls, timers, and settings, evidence capture, pass/fail or scoring criteria, corrective action assignment, and sign-off, so that nothing is missed and every audit finding is traceable.
How to Use Automatic Transfer Switch (ATS) Audit App
A scored audit only helps if every auditor scores the same way. Follow these steps to run an automatic transfer switch (ats) audit:
Open the automatic transfer switch (ats) audit template, which carries weighted criteria and a scoring scheme.
Score each transfer switch against the criteria and attach photo evidence for any non-conformance.
Let the app calculate the section and overall automatic transfer switch (ats) score so the site is comparable to others.
Raise a corrective action for each failed automatic transfer switch (ats) criterion with an owner and due date.
Sign off the automatic transfer switch (ats) audit. The scorecard and branded report generate automatically.
What Does a Transfer Switch Audit Cover?
A transfer switch audit scores condition against IEC 60947 and manufacturer schedule, checking transfer and retransfer operation, contacts and terminals, controls, timers, and settings, control power and battery, and load test under transfer. Each transfer switch finding is logged with a photo, a severity, and the failing point. So the transfer switch audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
Transfer and retransfer operation
Contacts and terminals
Controls, timers, and settings
Control power and battery
Load test under transfer
Common Defects It Surfaces
Failed or slow transfer
Pitted or hot contacts
Control or timer fault
Low control power
Load test failure
Evidence Captured
Transfer test record
Contact condition photo
Control reading
Templates align to IEC 60947, manufacturer schedule.
How Automatic Transfer Switch (ATS) Audit App Scores an Automatic Transfer Switch (Ats) Audit
Step 1
Score Consistently
Weighted criteria are built into the automatic transfer switch (ats) audit template.
Step 2
Evidence Every Finding
Auditors attach photo proof for each automatic transfer switch (ats) non-conformance.
Step 3
Compare and Act
Scorecards rank sites and failed automatic transfer switch (ats) criteria become corrective actions.
See the AI Behind Automatic Transfer Switch (ATS) Audit App
Everything your field team records during automatic transfer switch (ATS) audit, from photos and voice notes to sign-off, InspectWrk turns into a finished report automatically. Faster, more accurate, and without the retyping.
Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Built to Handle Any Challenge
From data collection to compliance: see how teams use InspectWrk for every use case.
What Automatic Transfer Switch (Ats) Teams Fix When Audits Are Scored the Same Way Everywhere
Automatic Transfer Switch (Ats) work breaks down the moment evidence leaves the form. These are the problems Automatic Transfer Switch (ATS) Audit App is built to remove, and what the team gets back when it does.
The same automatic transfer switch (ats) defect comes back every cycle
Failed or slow transfer, pitted or hot contacts, control or timer fault, low control power on the transfer switch are fixed, then reappear weeks later. Each automatic transfer switch (ats) defect is treated as fresh because nobody sees it is the third time this quarter. The transfer switch root cause is never addressed.
Problem
Repeat automatic transfer switch (ats) defects treated as new every time
No history tying findings to the same transfer switch
Budget spent re-fixing the same transfer switch problem
Solution
Full defect history per transfer switch
Recurring issue detection flags repeat automatic transfer switch (ats) problems
Root-cause automatic transfer switch (ats) work prioritised by evidence
The automatic transfer switch (ats) report is still being assembled by hand
Someone spends Friday afternoon collecting automatic transfer switch (ats) photos, notes, and audit records into a report. By the time leadership reads it, the automatic transfer switch (ats) data is days old and the next problem is already live.
Problem
Automatic Transfer Switch (Ats) reports compiled by hand from photos and notes
Leadership reads automatic transfer switch (ats) data that is already days old
Every automatic transfer switch (ats) report looks slightly different
Solution
Branded automatic transfer switch (ats) reports generate automatically per site and period
Scheduled automatic transfer switch (ats) reports reach managers before the morning meeting
One consistent automatic transfer switch (ats) report format across the estate
Every auditor scores the automatic transfer switch (ats) audit differently, so sites cannot be compared
One auditor is strict, another is lenient, and a third skips sections. The automatic transfer switch (ats) audit scores come back, but leadership cannot tell whether a low score means a weak site or a tough auditor.
Problem
Automatic Transfer Switch (Ats) scoring depends on which auditor showed up
Transfer switch sections get skipped with no record
Automatic Transfer Switch (Ats) scores are not comparable across sites
Solution
Weighted automatic transfer switch (ats) criteria baked into the audit template
Mandatory transfer switch sections, so nothing is skipped
Comparable automatic transfer switch (ats) scores that roll up across the estate
Frequently Asked Questions
What does Automatic Transfer Switch (ATS) Audit App check on a transfer switch audit?
Automatic Transfer Switch (ATS) Audit App runs a scored transfer switch audit against IEC 60947 and manufacturer schedule, checking transfer and retransfer operation, contacts and terminals, controls, timers, and settings, control power and battery, and load test under transfer. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for electrical engineering teams rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
Which transfer switch defects matter most, and what happens if they are missed?
The audit targets the transfer switch failures that matter most: failed or slow transfer, pitted or hot contacts, control or timer fault, and low control power. Left unchecked, a fault such as failed or slow transfer can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so electrical engineering teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Automatic Transfer Switch (ATS) Audit App support for transfer switch work?
Automatic Transfer Switch (ATS) Audit App keeps transfer switch checks aligned to IEC 60947 and manufacturer schedule. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, electrical engineering teams pull the records for the site in scope with one search instead of rebuilding them from folders. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run transfer switch checks offline and across multiple sites?
Yes. Automatic Transfer Switch (ATS) Audit App is offline-first: teams complete transfer switch checks on iOS or Android with no signal, capturing photos and the evidence each check requires in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So electrical engineering teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a transfer switch audit was completed?
Every completed transfer switch audit carries transfer test record, contact condition photo, and control reading, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, electrical engineering teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Related Facilities Management Apps
Explore other inspection and audit apps for facilities management teams.
