Scraper Audit App turns scraper audits into a scored, repeatable programme. Auditors score each scraper against weighted criteria, attach photo evidence, and track corrective actions to verified closure across every site. Managers compare scraper audit scores across sites and track every corrective action to closure.
Scraper Audit App runs a scored scraper audit covering tyres, pressure, and rim condition, bowl, apron, and ejector, cutting edge and router bits, hydraulic hoses and rams, and brakes, ROPS, and hitch, with a photo and a sign-off required on each point. Without a system, scraper findings live on paper and in chat. A scraper fault such as worn cutting edge and bits slips through. An audit then means rebuilding scraper evidence from folders.
Scraper Audit App keeps one record per scraper and per site, with photo evidence and a named sign-off. Each scraper finding is tracked to verified closure. Earthworks plant operators see scraper completion and overdue actions across the mining portfolio. Every scraper record proves what was checked, when, and by whom.
What to Include in a Scraper Audit App?
A comprehensive scraper audit covers the key areas that affect operations and compliance. Audit scraper operations with weighted scoring, photo evidence, and corrective action tracking. Your audit should include sections for tyres, pressure, and rim condition; bowl, apron, and ejector; and cutting edge and router bits, evidence capture, pass/fail or scoring criteria, corrective action assignment, and sign-off, so that nothing is missed and every audit finding is traceable.
How to Use Scraper Audit App
A scored audit only helps if every auditor scores the same way. Follow these steps to run a scraper audit:
Open the scraper audit template, which carries weighted criteria and a scoring scheme.
Score each scraper against the criteria and attach photo evidence for any non-conformance.
Let the app calculate the section and overall scraper score so the site is comparable to others.
Raise a corrective action for each failed scraper criterion with an owner and due date.
Sign off the scraper audit. The scorecard and branded report generate automatically.
What Does a Scraper Audit Cover?
A scraper audit scores condition against PUWER and manufacturer pre-start schedule, checking tyres, pressure, and rim condition, bowl, apron, and ejector, cutting edge and router bits, hydraulic hoses and rams, brakes, ROPS, and hitch, and lights, horn, and reversing alarm. Each scraper finding is logged with a photo, a severity, and the failing point. So the scraper audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
Tyres, pressure, and rim condition
Bowl, apron, and ejector
Cutting edge and router bits
Hydraulic hoses and rams
Brakes, ROPS, and hitch
Lights, horn, and reversing alarm
Common Defects It Surfaces
Worn cutting edge and bits
Apron or ejector faults
Hydraulic leaks
Hitch or brake defects
Damaged ROPS
Evidence Captured
Cutting edge photo
Bowl and apron photo
Hitch photo
Templates align to PUWER, manufacturer pre-start schedule.
How Scraper Audit App Scores a Scraper Audit
Step 1
Score Consistently
Weighted criteria are built into the scraper audit template.
Step 2
Evidence Every Finding
Auditors attach photo proof for each scraper non-conformance.
Step 3
Compare and Act
Scorecards rank sites and failed scraper criteria become corrective actions.
See the AI Behind Scraper Audit App
Everything your field team records during scraper audit, from photos and voice notes to sign-off, InspectWrk turns into a finished report automatically. Faster, more accurate, and without the retyping.
Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Built to Handle Any Challenge
From data collection to compliance: see how teams use InspectWrk for every use case.
What Scraper Teams Fix When Audits Are Scored the Same Way Everywhere
Scraper work breaks down the moment evidence leaves the form. These are the problems Scraper Audit App is built to remove, and what the team gets back when it does.
The scraper report is still being assembled by hand
Someone spends Friday afternoon collecting scraper photos, notes, and audit records into a report. By the time leadership reads it, the scraper data is days old and the next problem is already live.
Problem
Scraper reports compiled by hand from photos and notes
Leadership reads scraper data that is already days old
Every scraper report looks slightly different
Solution
Branded scraper reports generate automatically per site and period
Scheduled scraper reports reach managers before the morning meeting
One consistent scraper report format across the estate
Every auditor scores the scraper audit differently, so sites cannot be compared
One auditor is strict, another is lenient, and a third skips sections. The scraper audit scores come back, but leadership cannot tell whether a low score means a weak site or a tough auditor.
Problem
Scraper scoring depends on which auditor showed up
Scraper sections get skipped with no record
Scraper scores are not comparable across sites
Solution
Weighted scraper criteria baked into the audit template
Mandatory scraper sections, so nothing is skipped
Comparable scraper scores that roll up across the estate
The same scraper defect comes back every cycle
Worn cutting edge and bits, apron or ejector faults, hydraulic leaks, hitch or brake defects on the scraper are fixed, then reappear weeks later. Each scraper defect is treated as fresh because nobody sees it is the third time this quarter. The scraper root cause is never addressed.
What does Scraper Audit App check on a scraper audit?
Scraper Audit App runs a scored scraper audit against PUWER and manufacturer pre-start schedule, checking tyres, pressure, and rim condition, bowl, apron, and ejector, cutting edge and router bits, hydraulic hoses and rams, and brakes, ROPS, and hitch. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for earthworks plant operators rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
Which scraper defects matter most, and what happens if they are missed?
The audit targets the scraper failures that matter most: worn cutting edge and bits, apron or ejector faults, hydraulic leaks, and hitch or brake defects. Left unchecked, a fault such as worn cutting edge and bits can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so earthworks plant operators fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Scraper Audit App support for scraper work?
Scraper Audit App keeps scraper checks aligned to PUWER and manufacturer pre-start schedule. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, earthworks plant operators pull the records for the site in scope with one search instead of rebuilding them from folders. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run scraper checks offline and across multiple sites?
Yes. Scraper Audit App is offline-first: teams complete scraper checks on iOS or Android with no signal, capturing photos and the evidence each check requires in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So earthworks plant operators get a live view of what is complete, overdue, or failing per location, and a weak connection in a remote or low-signal area never costs a round or loses a photo.
What evidence proves a scraper audit was completed?
Every completed scraper audit carries cutting edge photo, bowl and apron photo, and hitch photo, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, earthworks plant operators can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Related Mining Apps
Explore other inspection and audit apps for mining teams.
