Galley Equipment Audit App

Galley Equipment Audit App turns galley equipment audits into a scored, repeatable programme. Auditors score each galley equipment against weighted criteria, attach photo evidence, and track corrective actions to verified closure across every site. Managers compare galley equipment audit scores across sites and track every corrective action to closure.

FormsEvidenceReportsInspectWrk
See It in 30 Minutes
Galley Equipment Audit App mobile inspection app showing offline forms and photo evidence

What is Galley Equipment Audit App?

Galley Equipment Audit App runs a scored galley equipment audit covering ovens and boilers, chillers and air chillers, securing latches and stowage, electrical connectors and bonding, and trolleys and brakes, with a photo and a sign-off required on each point. Without a system, galley equipment findings live on paper and in chat. A galley equipment fault such as oven or boiler fault slips through. An audit then means rebuilding galley equipment evidence from folders.

Galley Equipment Audit App keeps one record per galley equipment and per site, with photo evidence and a named sign-off. Each galley equipment finding is tracked to verified closure. Cabin engineering teams see galley equipment completion and overdue actions across the transport, logistics & warehousing portfolio. Every galley equipment record proves what was checked, when, and by whom.

What to Include in a Galley Equipment Audit App?

A comprehensive galley equipment audit covers the key areas that affect equipment and asset condition. Audit galley equipment with structured scoring, photo evidence, and corrective action tracking. Your audit should include sections for ovens and boilers, chillers and air chillers, and securing latches and stowage, evidence capture, pass/fail or scoring criteria, corrective action assignment, and sign-off, so that nothing is missed and every audit finding is traceable.

How to Use Galley Equipment Audit App

A scored audit only helps if every auditor scores the same way. Follow these steps to run a galley equipment audit:

  1. Open the galley equipment audit template, which carries weighted criteria and a scoring scheme.
  2. Score each galley equipment against the criteria and attach photo evidence for any non-conformance.
  3. Let the app calculate the section and overall galley equipment score so the site is comparable to others.
  4. Raise a corrective action for each failed galley equipment criterion with an owner and due date.
  5. Sign off the galley equipment audit. The scorecard and branded report generate automatically.

What Does a Galley Equipment Audit Cover?

A galley equipment audit scores condition against EASA Part-145 and operator cabin standard, checking ovens and boilers, chillers and air chillers, securing latches and stowage, electrical connectors and bonding, and trolleys and brakes. Each galley equipment finding is logged with a photo, a severity, and the failing point. So the galley equipment audit becomes a traceable evidence pack, not an ageing spreadsheet.

What Gets Checked

  • Ovens and boilers
  • Chillers and air chillers
  • Securing latches and stowage
  • Electrical connectors and bonding
  • Trolleys and brakes

Common Defects It Surfaces

  • Oven or boiler fault
  • Chiller not holding temperature
  • Failed securing latch
  • Damaged electrical connector
  • Trolley brake failure

Evidence Captured

  • Function test note
  • Temperature reading
  • Latch and connector photo

Templates align to EASA Part-145, operator cabin standard.

How Galley Equipment Audit App Scores a Galley Equipment Audit

Step 1
InspectWrk workflow step: Score Consistently

Score Consistently

Weighted criteria are built into the galley equipment audit template.

Step 2
InspectWrk workflow step: Evidence Every Finding

Evidence Every Finding

Auditors attach photo proof for each galley equipment non-conformance.

Step 3
InspectWrk workflow step: Compare and Act

Compare and Act

Scorecards rank sites and failed galley equipment criteria become corrective actions.

See the AI Behind Galley Equipment Audit App

Everything your field team records during galley equipment audit, from photos and voice notes to sign-off, InspectWrk turns into a finished report automatically. Faster, more accurate, and without the retyping.

Take a Photo. AI Fills the Form illustration

Take a Photo. AI Fills the Form

Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.

Speak. AI Writes It Down illustration

Speak. AI Writes It Down.

Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.

Inspections Done. Report Ready illustration

Inspections Done. Report Ready.

The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.

Connect Your Existing Tools illustration

Connect Your Existing Tools.

InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.

Live Dashboard. Every Site. Always On illustration

Live Dashboard. Every Site. Always On.

Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.

What Galley Equipment Teams Fix When Audits Are Scored the Same Way Everywhere

Galley Equipment work breaks down the moment evidence leaves the form. These are the problems Galley Equipment Audit App is built to remove, and what the team gets back when it does.

Galley Equipment Audit App: Equipment service partner signs off the galley equipment fix, and nobody checks it

Equipment service partner signs off the galley equipment fix, and nobody checks it

A defect on the galley equipment is handed to equipment service partner. A week later the galley equipment defect is marked closed. Whether the galley equipment work was done well, badly, or at all, nobody has verified.

Problem

  • Equipment service partner marks work closed with no verification
  • Poor galley equipment fixes are only found at the next inspection
  • No record of which galley equipment partners actually perform

Solution

  • Closure photo required before any galley equipment action is signed off
  • Equipment service partner performance scored on closure speed and re-opens
  • Re-opened galley equipment actions linked back to the original finding
Galley Equipment Audit App: You find out about a galley equipment problem from a complaint

You find out about a galley equipment problem from a complaint

There is no live view of galley equipment status across sites. The first sign that something failed on the galley equipment is a client call or an incident, by which point the problem is already public.

Problem

  • No live view of galley equipment status across sites
  • Galley Equipment problems surface as complaints, not as data
  • Galley Equipment risk is invisible until it becomes an incident

Solution

  • Live multi-site dashboard of galley equipment completion and open issues
  • Galley Equipment risk scoring flags sites trending to failure
  • Configurable dashboards filter galley equipment results by site and date
Galley Equipment Audit App: Every auditor scores the galley equipment audit differently, so sites cannot be compared

Every auditor scores the galley equipment audit differently, so sites cannot be compared

One auditor is strict, another is lenient, and a third skips sections. The galley equipment audit scores come back, but leadership cannot tell whether a low score means a weak site or a tough auditor.

Problem

  • Galley Equipment scoring depends on which auditor showed up
  • Galley equipment sections get skipped with no record
  • Galley Equipment scores are not comparable across sites

Solution

  • Weighted galley equipment criteria baked into the audit template
  • Mandatory galley equipment sections, so nothing is skipped
  • Comparable galley equipment scores that roll up across the estate

Frequently Asked Questions

What does Galley Equipment Audit App check on a galley equipment audit?

Galley Equipment Audit App runs a scored galley equipment audit against EASA Part-145 and operator cabin standard, checking ovens and boilers, chillers and air chillers, securing latches and stowage, electrical connectors and bonding, and trolleys and brakes. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for cabin engineering teams rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.

Which galley equipment defects matter most, and what happens if they are missed?

The audit targets the galley equipment failures that matter most: oven or boiler fault, chiller not holding temperature, failed securing latch, and damaged electrical connector. Left unchecked, a fault such as oven or boiler fault can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so cabin engineering teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.

Which standards does Galley Equipment Audit App support for galley equipment work?

Galley Equipment Audit App keeps galley equipment checks aligned to EASA Part-145 and operator cabin standard. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, cabin engineering teams pull the records for the site in scope with one search instead of rebuilding them from folders. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.

Can teams run galley equipment checks offline and across multiple sites?

Yes. Galley Equipment Audit App is offline-first: teams complete galley equipment checks on iOS or Android with no signal, capturing photos and the evidence each check requires in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So cabin engineering teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a remote or low-signal area never costs a round or loses a photo.

What evidence proves a galley equipment audit was completed?

Every completed galley equipment audit carries function test note, temperature reading, and latch and connector photo, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, cabin engineering teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.

Last updated: