Slip Hazard Inspection App runs structured slip hazard inspections across every site. Inspectors complete forms on a phone or tablet, capture photo and voice evidence on each slip hazard, and raise corrective actions the moment something fails. Managers see slip hazard compliance status, open issues, and performance across every site in real time.
Slip Hazard Inspection App runs a structured slip hazard inspection covering floor surface, spills, and wet-area signage, walkway obstructions and trailing leads, stair treads, nosings, and handrails, lighting on routes and stairs, and mat condition and entrance drainage, with a photo and a sign-off required on each point. Without a system, slip hazard findings live on paper and in chat. A slip hazard fault such as unmarked wet or contaminated floors slips through. An audit then means rebuilding slip hazard evidence from folders.
Slip Hazard Inspection App keeps one record per slip hazard and per site, with photo evidence and a named sign-off. Each slip hazard finding is tracked to verified closure. Facilities and HSE teams see slip hazard completion and overdue actions across the retail portfolio. Every slip hazard record proves what was checked, when, and by whom.
What to Include in a Slip Hazard Inspection App?
A comprehensive slip hazard inspection covers the key areas that affect operations and compliance. Inspect slip hazards with structured floor checks, photo evidence, and verified corrective closure across stores. Your inspection should include sections for floor surface, spills, and wet-area signage; walkway obstructions and trailing leads; and stair treads, nosings, and handrails, evidence capture, pass/fail or scoring criteria, corrective action assignment, and sign-off, so that nothing is missed and every inspection finding is traceable.
How to Use Slip Hazard Inspection App
A consistent routine keeps slip hazard inspections reliable across every site. Follow these steps to run an effective inspection:
Open the assigned slip hazard template on a phone or tablet and confirm the site, slip hazard, date, and inspector.
Work through each section, marking items pass or fail and recording the condition of the slip hazard.
Attach a photo or voice note for any finding, especially unmarked wet or contaminated floors, trailing leads or stored items in walkways, worn stair nosings or a loose handrail, poor lighting on a route or stair.
For every failed slip hazard item, raise a corrective action with an owner, severity, and due date.
Sign off the slip hazard form. The slip hazard report generates automatically and syncs to the multi-site dashboard.
What Does a Slip Hazard Inspection Cover?
A slip hazard inspection covers floor surface, spills, and wet-area signage, walkway obstructions and trailing leads, stair treads, nosings, and handrails, lighting on routes and stairs, mat condition and entrance drainage, and level changes and edge marking. Facilities and HSE teams capture a photo and a reading on each slip hazard point. They work offline where signal is poor, then sign the slip hazard round off. So every slip hazard record proves what was checked, when, and by whom.
What Gets Checked
Floor surface, spills, and wet-area signage
Walkway obstructions and trailing leads
Stair treads, nosings, and handrails
Lighting on routes and stairs
Mat condition and entrance drainage
Level changes and edge marking
Common Defects It Surfaces
Unmarked wet or contaminated floors
Trailing leads or stored items in walkways
Worn stair nosings or a loose handrail
Poor lighting on a route or stair
Curled mats or ponding at entrances
Evidence Captured
Hazard photo
Signage photo
Stair and handrail photo
Templates align to HSE slips and trips guidance, OSHA walking-working surfaces, workplace safety regulations.
How Slip Hazard Inspection App Runs a Slip Hazard Inspection
Step 1
Define and Deploy
Build the slip hazard template with objective pass-fail criteria and schedule it to mobile teams.
Step 2
Capture and Verify
Inspectors run the inspection with photo evidence on each finding, such as unmarked wet or contaminated floors, trailing leads or stored items in walkways, worn stair nosings or a loose handrail, poor lighting on a route or stair, and failed items raise corrective actions.
Step 3
Report and Improve
Dashboards built on verified slip hazard data reveal recurring patterns on the slip hazard across every site.
See the AI Behind Slip Hazard Inspection App
Everything your field team records during slip hazard inspection, from photos and voice notes to sign-off, InspectWrk turns into a finished report automatically. Faster, more accurate, and without the retyping.
Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Built to Handle Any Challenge
From data collection to compliance: see how teams use InspectWrk for every use case.
What Slip Hazard Teams Fix When Inspections Move Off Paper
Slip Hazard work breaks down the moment evidence leaves the form. These are the problems Slip Hazard Inspection App is built to remove, and what the team gets back when it does.
You find out about a slip hazard problem from a complaint
There is no live view of slip hazard status across sites. The first sign that something failed on the slip hazard is a client call or an incident, by which point the problem is already public.
Problem
No live view of slip hazard status across sites
Slip Hazard problems surface as complaints, not as data
Slip Hazard risk is invisible until it becomes an incident
Solution
Live multi-site dashboard of slip hazard completion and open issues
Slip Hazard risk scoring flags sites trending to failure
Configurable dashboards filter slip hazard results by site and date
Slip Hazard checks signed off on paper with no proof the slip hazard was actually checked
A slip hazard inspection is ticked off on a paper form. Weeks later someone asks whether the slip hazard was actually checked, and whether unmarked wet or contaminated floors, trailing leads or stored items in walkways, worn stair nosings or a loose handrail, poor lighting on a route or stair were looked at. Nobody can say for certain the slip hazard passed.
Problem
Slip Hazard checks recorded on paper with no evidence attached
No way to confirm unmarked wet or contaminated floors, trailing leads or stored items in walkways, worn stair nosings or a loose handrail, poor lighting on a route or stair were actually inspected
Slip Hazard findings re-keyed into a spreadsheet, with errors and delay
Solution
One digital slip hazard form with required fields and validation
Photo, GPS, and timestamp on every slip hazard check
Slip Hazard findings sync to the dashboard, no re-keying
Site contractor signs off the slip hazard fix, and nobody checks it
A defect on the slip hazard is handed to site contractor. A week later the slip hazard defect is marked closed. Whether the slip hazard work was done well, badly, or at all, nobody has verified.
Problem
Site contractor marks work closed with no verification
Poor slip hazard fixes are only found at the next inspection
No record of which slip hazard partners actually perform
Solution
Closure photo required before any slip hazard action is signed off
Site contractor performance scored on closure speed and re-opens
Re-opened slip hazard actions linked back to the original finding
Frequently Asked Questions
What does Slip Hazard Inspection App check on a slip hazard inspection?
Slip Hazard Inspection App runs a structured slip hazard inspection covering floor surface, spills, and wet-area signage, walkway obstructions and trailing leads, stair treads, nosings, and handrails, lighting on routes and stairs, and mat condition and entrance drainage. Each point is captured on mobile with a photo and a reading, and a named inspector signs the round off before it can close. The same template runs on every site, so facilities and HSE teams work to one standard rather than a version that drifts between locations. Every record proves what was checked, when, and by whom, so the evidence is ready long before an assessor asks for it.
Which slip hazard defects matter most, and what happens if they are missed?
The inspection targets the slip hazard failures that matter most: unmarked wet or contaminated floors, trailing leads or stored items in walkways, worn stair nosings or a loose handrail, and poor lighting on a route or stair. Left unchecked, a fault such as unmarked wet or contaminated floors can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so facilities and HSE teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Slip Hazard Inspection App support for slip hazard work?
Slip Hazard Inspection App keeps slip hazard checks aligned to HSE slips and trips guidance, OSHA walking-working surfaces, and workplace safety regulations. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, facilities and HSE teams pull the records for the site in scope with one search instead of rebuilding them from folders. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run slip hazard checks offline and across multiple sites?
Yes. Slip Hazard Inspection App is offline-first: teams complete slip hazard checks on iOS or Android with no signal, capturing photos and the evidence each check requires in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So facilities and HSE teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a remote or low-signal area never costs a round or loses a photo.
What evidence proves a slip hazard inspection was completed?
Every completed slip hazard inspection carries hazard photo, signage photo, and stair and handrail photo, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, facilities and HSE teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Related Retail Apps
Explore other inspection and audit apps for retail teams.
