Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Workplace Safety & EHS
Apron Safety Software
Run apron safety in the field, capture photo evidence, log defects, assign corrective actions, and keep a complete, provable inspection history, all in one workflow.
InspectWrk is the software we provide to run this inspection workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Foreign object debris near stands
Reported by voice or chat, foreign object debris near stands is caught late and logged with no evidence tied to the asset.
Faded stand markings
Faded stand markings goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Standing water from blocked drainage
On a manual round standing water from blocked drainage is easy to miss, and hard to defend to an auditor after the fact.
Fuel or oil spills
Fuel or oil spills lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the whole apron safety inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
- 1
Inspect
Open the right apron safety checklist by scanning the asset or location QR tag.
- 2
Capture
Record photos, readings, and signatures, offline where signal is poor.
- 3
Find
AI flags likely defects from the photo and the inspector confirms or overrides.
- 4
Correct
A failed item becomes an owned action with a severity and a deadline.
- 5
Verify
The finding stays open until a named approver signs off proof of the fix.
- 6
Report
A branded report generates on close-out and dashboards update across sites.
Workflow
How Does Apron Safety Run from a Hazard or FOD Find to a Tracked SMS Action and Trend?
The inspection workflow, end to end: Plan → Inspect → Capture evidence → Record findings → Correct → Re-inspect → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Apron Inspection Template
Across the apron safety portfolio, your apron controls become a mobile template with required photos and readings on pavement condition and spalling, stand and equipment-restraint-line markings, apron floodlighting, fuel and oil spills, and drainage and gullies, aligned to ICAO Annex 14 and CAP 168, so every site inspects to the same standard from day one.
- 2
Capture the Apron Check in the Field
On apron safety programmes, inspectors complete the apron inspection on iOS or Android, offline where signal is poor, recording stand condition photo, FOD find log, and marking and lighting photo against each point before a named sign-off can close the round.
- 3
Route Apron Findings to Verified Closure
For apron safety field teams, A failed item such as foreign object debris near stands becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so apron defects do not resurface unnoticed.
- 4
Report Apron Performance
Across multi-site apron safety rounds, every apron inspection feeds live dashboards and branded exports, so airside operations teams see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for apron safety
The capabilities that matter for this workflow, and what your team can do with each one.
Structured FOD Find Logging
Each FOD find is logged by type, stand, and photo. Why it matters: a recurring FOD source on a stand is only fixable once the pattern is visible rather than binned and forgotten.
Fuel and Oil Spill Reporting
Spills are logged by stand with type, coverage, and photo, then routed into the SMS. Why it matters: a spill is a slip, fire, and environmental hazard that must be traced and contained.
GSE Staging Discipline Tracking
Equipment parked across limit lines or walkways is logged by stand. Why it matters: a GSE staging breach risks aircraft damage, blocked egress, and pedestrian injury on the ramp.
SMS Hazard Routing
In Aviation apron safety operations, each hazard routes into the SMS with an owner, risk rating, and mitigation. Why it matters: a hazard with no owner is the gap an incident investigation exposes.
Safety Trend Dashboard
Hazards trend per stand and zone over time. Why it matters: the safety manager targets resources where FOD, spill, and GSE risk is concentrating.
Per-apron Safety Evidence Export
A branded safety evidence pack exports per apron area for a review or audit. Why it matters: a review request becomes a minutes-long export, not a hunt across radio logs and forms.
Coverage
What Does an Apron Inspection Cover?
An apron inspection covers pavement condition and spalling, stand and equipment-restraint-line markings, apron floodlighting, fuel and oil spills, drainage and gullies, and foreign object debris on stands. Airside operations teams capture a photo and a reading on each apron point. They work offline where signal is poor, then sign the apron round off. So every apron record proves what was checked, when, and by whom.
What Gets Checked
- Pavement condition and spalling
- Stand and equipment-restraint-line markings
- Apron floodlighting
- Fuel and oil spills
- Drainage and gullies
- Foreign object debris on stands
Common Defects It Surfaces
- Foreign object debris near stands
- Faded stand markings
- Standing water from blocked drainage
- Fuel or oil spills
- Cracked or spalling pavement
Evidence Captured
- Stand condition photo
- FOD find log
- Marking and lighting photo
Records align toICAO Annex 14CAP 168
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Airside operations teams
A live view of apron inspection status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided apron checks on mobile with offline capture, so foreign object debris near stands is caught and logged on the spot.
Compliance stakeholders
Searchable apron history and ICAO Annex 14-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Aviation teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the apron safety inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like pavement condition and spalling are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided apron safety templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as foreign object debris near stands is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and ICAO Annex 14 evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to ICAO Annex 14, and managers see status across every site live. |
Rollout
How Should an Airport Pilot Digital Apron Safety Before Rolling It Out to Every Stand?
Pilot on One Apron Area
Start with one apron area or pier so the hazard categories and SMS routing are validated against real FOD, spill, and GSE staging risks before rollout to the rest of the apron, taxiways, and runways.
Access and Roles
Ramp teams get hazard capture, the ramp operations manager gets the open-hazard view, and the safety manager gets the SMS trend and closure picture per apron area through role-based access.
Before You Switch
Common Questions Before You Start
We already run apron safety checks on paper. Do we have to change our process?
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
Will field teams actually use it?
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
What happens when a defect is found?
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Apron Safety Off Paper?
Inspections Across Industries
View All
Platform features
Which Apron Safety Templates Should You Start With?
Get started with inspection and audit checklist templates.
Template
Light Vehicle Safety Inspection
Use this template to perform a comprehensive safety inspection of light vehicles. This check ensures all critical components are checked ...
500+GET
Frequently Asked Questions About Apron Safety Software
What does Apron Safety Software check on an apron inspection?
Apron Safety Software runs a structured apron inspection covering pavement condition and spalling, stand and equipment-restraint-line markings, apron floodlighting, fuel and oil spills, and drainage and gullies. Each point is captured on mobile with a photo and a reading, and a named inspector signs the round off before it can close. The same template runs on every site, so airside operations teams work to one standard rather than a version that drifts between locations. Every record proves what was checked, when, and by whom, so the evidence is ready long before an assessor asks for it.
How often should an apron inspection be done?
How often apron checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Apron Safety Software sets the cadence per site, reminds airside operations teams before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset. In aviation, Apron Safety Software turns approved apron safety checklists into mobile checks field teams complete on any device.
Which standards does Apron Safety Software support for apron work?
Apron Safety Software keeps apron checks aligned to ICAO Annex 14 and CAP 168. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, airside operations teams export a branded evidence pack built from stand condition photo, FOD find log, and marking and lighting photo, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run apron checks offline and across multiple sites?
Yes. Apron Safety Software is offline-first: teams complete apron checks on iOS or Android with no signal, capturing stand condition photo, FOD find log, and marking and lighting photo in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So airside operations teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What does Apron Safety Software do?
In aviation, Apron Safety Software turns approved apron safety checklists into mobile checks field teams complete on any device. Field staff complete every check on the device, add notes and photos, and the apron safety record uploads once back online. Because evidence is captured as the work happens, the apron safety trail still stands up months after the visit. Open, overdue, and closed items sit in one list, so Warehouse Managers see status without chasing anyone. Every apron safety record carries the inspector, the time, and the photos needed to prove the check happened.
Last updated: