Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Inspection & Field Operations
Galley Equipment MaintenanceSoftware
Schedule galley equipment maintenance, complete condition checks from the field, raise work orders from failed items, and keep a full asset and maintenance history, all in one workflow.
InspectWrk is the software we provide to run this maintenance round workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Oven or boiler fault
Reported by voice or chat, oven or boiler fault is caught late and logged with no evidence tied to the asset.
Chiller not holding temperature
Chiller not holding temperature goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Failed securing latch
On a manual round failed securing latch is easy to miss, and hard to defend to an auditor after the fact.
Damaged electrical connector
Damaged electrical connector lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the whole galley equipment maintenance inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
- 1
Inspect
Open the right galley equipment maintenance checklist by scanning the asset or location QR tag.
- 2
Capture
Record photos, readings, and signatures, offline where signal is poor.
- 3
Find
AI flags likely defects from the photo and the inspector confirms or overrides.
- 4
Correct
A failed item becomes an owned action with a severity and a deadline.
- 5
Verify
The finding stays open until a named approver signs off proof of the fix.
- 6
Report
A branded report generates on close-out and dashboards update across sites.
Workflow
How Does Galley Maintenance Run from AMM Task Card to Continuing Airworthiness Records?
The maintenance round workflow, end to end: Register asset → Schedule → Perform work → Record findings → Raise work order → Verify → History. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Galley Equipment Maintenance Template
Across the galley equipment maintenance portfolio, your galley equipment controls become a mobile template with required photos and readings on ovens and boilers, chillers and air chillers, securing latches and stowage, electrical connectors and bonding, and trolleys and brakes, aligned to EASA Part-145 and operator cabin standard, so every site inspects to the same standard from day one.
- 2
Capture the Galley Equipment Check in the Field
Inspectors complete the galley equipment maintenance on iOS or Android, offline where signal is poor, recording function test note, temperature reading, and latch and connector photo against each point before a named sign-off can close the round.
- 3
Route Galley Equipment Findings to Verified Closure
For galley equipment maintenance field teams, A failed item such as oven or boiler fault becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so galley equipment defects do not resurface unnoticed.
- 4
Report Galley Equipment Performance
Every galley equipment maintenance feeds live dashboards and branded exports, so cabin engineering teams see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for galley equipment maintenance
The capabilities that matter for this workflow, and what your team can do with each one.
AMM and MPD Task Scheduling
Each galley task card is scheduled against the asset with the next due date calculated. Why it matters: a task tracked on the asset record cannot slip the way a binder card behind a spreadsheet does.
Service-interval Clocks
Oven, boiler, and chiller intervals raise staged alerts before they fall due. Why it matters: a missed service interval found at a check disrupts the plan and can ground the galley item.
Parts and Consumable Records
The part fitted to each galley asset is logged against the task. Why it matters: a traceable parts history is what an audit and a warranty claim both depend on.
Deferred Item Clocks
Deferred galley items carry a clearance deadline with alerts. Why it matters: a deferral with no clock is how an item quietly runs past its allowable limit.
Task Evidence and Sign-off
Each completed task carries required photos and a named sign-off. Why it matters: a signed task with evidence is defensible where a paper card with a signature alone is not.
Fleet Maintenance Dashboard
Galley tasks due, overdue, and deferred roll up across tail numbers. Why it matters: the planner sees fleet galley status without calling each base.
Coverage
What Does a Galley Equipment Maintenance Cover?
A galley equipment maintenance round covers ovens and boilers, chillers and air chillers, securing latches and stowage, electrical connectors and bonding, and trolleys and brakes. Each galley equipment task is scheduled per asset and done on mobile with photo evidence. It is logged to the galley equipment service history. So galley equipment upkeep is provable, not assumed.
What Gets Checked
- Ovens and boilers
- Chillers and air chillers
- Securing latches and stowage
- Electrical connectors and bonding
- Trolleys and brakes
Common Defects It Surfaces
- Oven or boiler fault
- Chiller not holding temperature
- Failed securing latch
- Damaged electrical connector
- Trolley brake failure
Evidence Captured
- Function test note
- Temperature reading
- Latch and connector photo
Records align toEASA Part-145operator cabin standard
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Cabin engineering teams
A live view of galley equipment maintenance status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided galley equipment checks on mobile with offline capture, so oven or boiler fault is caught and logged on the spot.
Compliance stakeholders
Searchable galley equipment history and EASA Part-145-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Aviation teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the galley equipment maintenance inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like ovens and boilers are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided galley equipment maintenance templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as oven or boiler fault is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and EASA Part-145 evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to EASA Part-145, and managers see status across every site live. |
Rollout
How Should MRO and CAMO Teams Pilot Digital Galley Maintenance Before Fleet Rollout?
Pilot on One Aircraft Type
Start with a single fleet type so the galley task cards, service intervals, and asset list are validated against real serial numbers before rollout to mixed types and other bases.
Access and Roles
Line engineers get task sign-off, planners get scheduling control, and CAMO gets read access to the full galley maintenance trail per tail number through role-based access.
Before You Switch
Common Questions Before You Start
We already run galley equipment maintenance checks on paper. Do we have to change our process?
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
Will field teams actually use it?
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
What happens when a defect is found?
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Galley Equipment Maintenance Off Paper?
Inspections Across Industries
View All
Which Galley Maintenance Templates Should You Start With?
Get started with inspection and audit checklist templates.
Template
Light Vehicle Safety Inspection
Use this template to perform a comprehensive safety inspection of light vehicles. This check ensures all critical components are checked ...
500+GET
Frequently Asked Questions About Galley Equipment Maintenance Software
What does Galley Equipment Maintenance Software check on a galley equipment maintenance?
Galley Equipment Maintenance Software runs planned galley equipment maintenance covering ovens and boilers, chillers and air chillers, securing latches and stowage, electrical connectors and bonding, and trolleys and brakes. Each task is scheduled per asset and completed on mobile with photo evidence, then logged to the service history, so cabin engineering teams can prove upkeep happened on time. Catching oven or boiler fault on a planned visit avoids a reactive breakdown later. Due dates and overdue tasks surface on the dashboard before a service quietly lapses, which is the common and expensive gap when schedules live in a spreadsheet.
How often should a galley equipment maintenance be done?
How often galley equipment checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Galley Equipment Maintenance Software sets the cadence per site, reminds cabin engineering teams before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset.
Which galley equipment defects matter most, and what happens if they are missed?
The maintenance targets the galley equipment failures that matter most: oven or boiler fault, chiller not holding temperature, failed securing latch, and damaged electrical connector. Left unchecked, a fault such as oven or boiler fault can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so cabin engineering teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Galley Equipment Maintenance Software support for galley equipment work?
Galley Equipment Maintenance Software keeps galley equipment checks aligned to EASA Part-145 and operator cabin standard. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, cabin engineering teams export a branded evidence pack built from function test note, temperature reading, and latch and connector photo, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run galley equipment checks offline and across multiple sites?
Yes. Galley Equipment Maintenance Software is offline-first: teams complete galley equipment checks on iOS or Android with no signal, capturing function test note, temperature reading, and latch and connector photo in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So cabin engineering teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a galley equipment maintenance was completed?
Every completed galley equipment maintenance carries function test note, temperature reading, and latch and connector photo, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, cabin engineering teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: