Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Workplace Safety & EHS
Life Vests SafetySoftware
Run life vests safety in the field, capture photo evidence, log defects, assign corrective actions, and keep a complete, provable inspection history, all in one workflow.
InspectWrk is the software we provide to run this inspection workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Missing or miscounted vest
Reported by voice or chat, missing or miscounted vest is caught late and logged with no evidence tied to the asset.
Broken seal
Broken seal goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Spent CO2 cylinder
On a manual round spent CO2 cylinder is easy to miss, and hard to defend to an auditor after the fact.
Dead locator light
Dead locator light lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the whole life vests safety inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
- 1
Inspect
Open the right life vests safety checklist by scanning the asset or location QR tag.
- 2
Capture
Record photos, readings, and signatures, offline where signal is poor.
- 3
Find
AI flags likely defects from the photo and the inspector confirms or overrides.
- 4
Correct
A failed item becomes an owned action with a severity and a deadline.
- 5
Verify
The finding stays open until a named approver signs off proof of the fix.
- 6
Report
A branded report generates on close-out and dashboards update across sites.
Workflow
How Does Life Vest Safety Run from Hazard Report to SMS Corrective Action?
The inspection workflow, end to end: Plan → Inspect → Capture evidence → Record findings → Correct → Re-inspect → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Life Vests Inspection Template
Across the life vests safety portfolio, your life vests controls become a mobile template with required photos and readings on presence and count per seat, pouch seal and tamper indicator, inflation and CO2 cylinder, light and whistle, and expiry and service date, aligned to EASA Part-145 and operator cabin standard, so every site inspects to the same standard from day one.
- 2
Capture the Life Vests Check in the Field
On life vests safety programmes, inspectors complete the life vests inspection on iOS or Android, offline where signal is poor, recording seat count record, seal condition photo, and service date photo against each point before a named sign-off can close the round.
- 3
Route Life Vests Findings to Verified Closure
For life vests safety field teams, A failed item such as missing or miscounted vest becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so life vests defects do not resurface unnoticed.
- 4
Report Life Vests Performance
Across multi-site life vests safety rounds, every life vests inspection feeds live dashboards and branded exports, so cabin engineering teams see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for life vests safety
The capabilities that matter for this workflow, and what your team can do with each one.
Cabin Hazard Capture
Crew raise a life vest hazard from the cabin with seat location and a photo. Why it matters: a hazard that reaches the safety team in minutes can stop a non-compliant overwater dispatch.
Risk Scoring
Each vest hazard is scored for severity and likelihood so the response matches the risk. Why it matters: a failed CO2 inflation is a life-safety risk that must outrank a cosmetic stowage scuff.
Corrective Action Tracking
Each action carries an owner, deadline, and verified closure linked to the hazard. Why it matters: a corrective action agreed verbally is the one that never gets closed.
Trend Analysis by Vest Type
Repeat defects aggregate by vest type and tail across the fleet. Why it matters: a recurring cylinder failure is a systemic root cause, not a series of one-offs.
SMS Reporting Feed
Closed hazards and actions feed the safety management system record. Why it matters: a hazard outside the SMS is a safety event the audit will say you failed to manage.
Safety Evidence Export
Scoped hazard and corrective action records export for an SMS audit. Why it matters: an audit request becomes a minutes-long export, not a hazard-form search.
Coverage
What Does a Life Vests Inspection Cover?
A life vests inspection covers presence and count per seat, pouch seal and tamper indicator, inflation and CO2 cylinder, light and whistle, and expiry and service date. Cabin engineering teams capture a photo and a reading on each life vests point. They work offline where signal is poor, then sign the life vests round off. So every life vests record proves what was checked, when, and by whom.
What Gets Checked
- Presence and count per seat
- Pouch seal and tamper indicator
- Inflation and CO2 cylinder
- Light and whistle
- Expiry and service date
Common Defects It Surfaces
- Missing or miscounted vest
- Broken seal
- Spent CO2 cylinder
- Dead locator light
- Expired unit
Evidence Captured
- Seat count record
- Seal condition photo
- Service date photo
Records align toEASA Part-145operator cabin standard
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Cabin engineering teams
A live view of life vests inspection status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided life vests checks on mobile with offline capture, so missing or miscounted vest is caught and logged on the spot.
Compliance stakeholders
Searchable life vests history and EASA Part-145-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Aviation teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the life vests safety inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like presence and count per seat are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided life vests safety templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as missing or miscounted vest is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and EASA Part-145 evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to EASA Part-145, and managers see status across every site live. |
Rollout
How Should Cabin Safety and SMS Teams Pilot Digital Life Vest Safety Before Fleet Rollout?
Pilot on One Base
Start with one cabin crew base so the hazard categories, risk scoring, and corrective action workflow are validated against real life vest reports before rollout to other bases and the wider SMS.
Access and Roles
Cabin crew get hazard capture, the safety team gets risk scoring and corrective action ownership, and SMS leads get read access to trends and evidence through role-based access.
Before You Switch
Common Questions Before You Start
We already run life vests safety checks on paper. Do we have to change our process?
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
Will field teams actually use it?
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
What happens when a defect is found?
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Life Vests Safety Off Paper?
Inspections Across Industries
View All
Which Life Vest Safety Templates Should You Start With?
Get started with inspection and audit checklist templates.
Template
Light Vehicle Safety Inspection
Use this template to perform a comprehensive safety inspection of light vehicles. This check ensures all critical components are checked ...
500+GET
Frequently Asked Questions About Life Vests Safety Software
What does Life Vests Safety Software check on a life vests inspection?
Life Vests Safety Software runs a structured life vests inspection covering presence and count per seat, pouch seal and tamper indicator, inflation and CO2 cylinder, light and whistle, and expiry and service date. Each point is captured on mobile with a photo and a reading, and a named inspector signs the round off before it can close. The same template runs on every site, so cabin engineering teams work to one standard rather than a version that drifts between locations. Every record proves what was checked, when, and by whom, so the evidence is ready long before an assessor asks for it.
How often should a life vests inspection be done?
How often life vests checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Life Vests Safety Software sets the cadence per site, reminds cabin engineering teams before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset.
Which standards does Life Vests Safety Software support for life vests work?
Life Vests Safety Software keeps life vests checks aligned to EASA Part-145 and operator cabin standard. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, cabin engineering teams export a branded evidence pack built from seat count record, seal condition photo, and service date photo, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run life vests checks offline and across multiple sites?
Yes. Life Vests Safety Software is offline-first: teams complete life vests checks on iOS or Android with no signal, capturing seat count record, seal condition photo, and service date photo in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So cabin engineering teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What is Life Vests Safety Software used for?
In aviation, Life Vests Safety Software turns approved life vests safety checklists into mobile checks field teams complete on any device. Each life vests safety inspections round is finished in the field, with the photos and a named sign-off attached before it submits. The record shows what was checked, when, and by whom, so Fleet Supervisors can answer a query without rebuilding it from folders. When an inspector flags a problem, it routes to whoever owns the fix and reports back once it is done.
Last updated: