Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Quality & Compliance
Oxygen Masks AuditSoftware
Plan and score oxygen masks audit, capture evidence against every requirement, turn findings into tracked corrective actions, and produce audit-ready reports, all in one workflow.
InspectWrk is the software we provide to run this audit workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Mask fails to drop
Reported by voice or chat, mask fails to drop is caught late and logged with no evidence tied to the asset.
Low oxygen pressure or spent generator
Low oxygen pressure or spent generator goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
No flow on don
On a manual round no flow on don is easy to miss, and hard to defend to an auditor after the fact.
Cracked hose
Cracked hose lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the oxygen masks audit as a scored assessment that produces a defensible pack: plan, score against the rubric, evidence every finding, and drive corrective action to closure.
- 1
Plan
Schedule the oxygen masks audit and load the rubric the regulator, insurer, or client expects.
- 2
Score
Assess each category and score it, so the result is comparable audit to audit.
- 3
Evidence
Attach a photo and note to each finding, with inspector, timestamp, and location.
- 4
Finding
Every non-conformance becomes a corrective action with a severity and owner.
- 5
CAPA
Actions stay open until a named approver verifies the fix.
- 6
Report
A branded, scored audit pack exports in one click for the reviewer.
Workflow
How Does an Oxygen System Audit Run from Evidence Capture to Auditor-Ready Pack?
The audit workflow, end to end: Plan → Assess & score → Capture evidence → Record findings → Corrective action → Verify closure → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Oxygen Masks Audit Template
On every oxygen masks audit cycle, your oxygen masks controls become a mobile template with required photos and readings on mask stowage and drop test, oxygen generators or supply pressure, flow and don indicators, hoses and connections, and expiry and service dates, aligned to EASA Part-145 and operator cabin standard, so every site inspects to the same standard from day one.
- 2
Capture the Oxygen Masks Check in the Field
Inspectors complete the oxygen masks audit on iOS or Android, offline where signal is poor, recording drop test note, pressure reading, and service date photo against each point before a named sign-off can close the round.
- 3
Route Oxygen Masks Findings to Verified Closure
In Aviation oxygen masks audit operations, A failed item such as mask fails to drop becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so oxygen masks defects do not resurface unnoticed.
- 4
Report Oxygen Masks Performance
Every oxygen masks audit feeds live dashboards and branded exports, so cabin engineering teams see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for oxygen masks audit
The capabilities that matter for this workflow, and what your team can do with each one.
Traceable Evidence Capture
Every oxygen entry records the named person, role, timestamp, and photo against the serial number. Why it matters: an untraceable record is the first thing an auditor challenges.
Generator Expiry History
Each generator carries its full service-life and replacement history per serial. Why it matters: a reconstructed expiry trail that does not match the installed unit fails the audit.
Cylinder Date Records
Cylinder pressure, hydrostatic dates, and certificates sit on one record per serial number. Why it matters: scattered cylinder notes are slow to assemble and easy to contest at audit.
Finding Closure Trail
Each finding shows its corrective action, evidence, and verified closure with the named owner. Why it matters: an unproven closure becomes a repeat finding at the next audit.
Record-to-origin Tracing
Any oxygen entry traces back to who did the work, when, and with what evidence in a few taps. Why it matters: an auditor following one item across its life needs the trail in seconds, not hours.
Per-tail Evidence Export
A scoped, branded evidence pack exports per aircraft for the auditor. Why it matters: audit prep that takes days of manual assembly becomes a minutes-long export.
Coverage
What Does an Oxygen Masks Audit Cover?
An oxygen masks audit scores condition against EASA Part-145 and operator cabin standard, checking mask stowage and drop test, oxygen generators or supply pressure, flow and don indicators, hoses and connections, and expiry and service dates. Each oxygen masks finding is logged with a photo, a severity, and the failing point. So the oxygen masks audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
- Mask stowage and drop test
- Oxygen generators or supply pressure
- Flow and don indicators
- Hoses and connections
- Expiry and service dates
Common Defects It Surfaces
- Mask fails to drop
- Low oxygen pressure or spent generator
- No flow on don
- Cracked hose
- Expired unit
Evidence Captured
- Drop test note
- Pressure reading
- Service date photo
Records align toEASA Part-145operator cabin standard
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Cabin engineering teams
A live view of oxygen masks audit status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided oxygen masks checks on mobile with offline capture, so mask fails to drop is caught and logged on the spot.
Compliance stakeholders
Searchable oxygen masks history and EASA Part-145-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Aviation teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the oxygen masks audit job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Periodic scoring | Oxygen masks audits, covering points like mask stowage and drop test, are scored on paper, so results are hard to compare across periods or sites. | Each audit is scored against a fixed rubric, so trend and site comparison are genuinely comparable. |
| Evidence per finding | A finding such as mask fails to drop is noted without a photo tied to the asset and time. | Every finding carries a photo, inspector identity, timestamp, and location. |
| Non-conformance to CAPA | Corrective actions live in email with no owner, deadline, or proof the fix happened. | Each non-conformance becomes a tracked action with severity, owner, and verified closure. |
| Audit trail | Historic audit records are scattered and slow to retrieve when a reviewer asks. | Twelve months of scored audits retrieve in one click with the full evidence trail. |
| Audit pack | The pack is assembled by hand the week of the review. | A branded, scored pack aligned to EASA Part-145 exports the moment the audit closes. |
Rollout
How Should an Airline Pilot Digital Oxygen Audit Traceability Before Fleet Rollout?
Pilot on One Aircraft Type
Start with a single fleet type so the evidence trail, generator and cylinder histories, and finding closure workflow are validated against real serial numbers before rollout to mixed types and other bases.
Access and Roles
Quality Assurance gets full audit control, auditors get scoped read access to the evidence trail, and CAMO engineers get visibility per tail number through role-based access.
Before You Switch
What Auditors and QHSE Teams Ask
Can it produce a scored, defensible oxygen masks audit pack?
Yes. Each audit scores against the rubric, every finding carries photo evidence and a timestamp, and a branded pack exports in one click with the full trail a reviewer expects.
How are non-conformances tracked to closure?
Each becomes a corrective action with a severity, an owner, and a deadline, and stays open until a named approver verifies the fix with proof.
Can we compare audit results over time and across sites?
Because each audit scores against the same rubric with enforced definitions, trend and cross-site comparison are genuinely comparable rather than subjective.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Oxygen Masks Audit Off Paper?
Inspections Across Industries
View All
Which Oxygen System Audit Templates Should You Start With?
Get started with inspection and audit checklist templates.
Template
Light Vehicle Safety Inspection
Use this template to perform a comprehensive safety inspection of light vehicles. This check ensures all critical components are checked ...
500+GET
Frequently Asked Questions About Oxygen Masks Audit Software
What does Oxygen Masks Audit Software check on an oxygen masks audit?
Oxygen Masks Audit Software runs a scored oxygen masks audit against EASA Part-145 and operator cabin standard, checking mask stowage and drop test, oxygen generators or supply pressure, flow and don indicators, hoses and connections, and expiry and service dates. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for cabin engineering teams rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
How often should an oxygen masks audit be done?
How often oxygen masks checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Oxygen Masks Audit Software sets the cadence per site, reminds cabin engineering teams before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset.
Which oxygen masks defects matter most, and what happens if they are missed?
The audit targets the oxygen masks failures that matter most: mask fails to drop, low oxygen pressure or spent generator, no flow on don, and cracked hose. Left unchecked, a fault such as mask fails to drop can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so cabin engineering teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Oxygen Masks Audit Software support for oxygen masks work?
Oxygen Masks Audit Software keeps oxygen masks checks aligned to EASA Part-145 and operator cabin standard. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, cabin engineering teams export a branded evidence pack built from drop test note, pressure reading, and service date photo, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run oxygen masks checks offline and across multiple sites?
Yes. Oxygen Masks Audit Software is offline-first: teams complete oxygen masks checks on iOS or Android with no signal, capturing drop test note, pressure reading, and service date photo in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So cabin engineering teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves an oxygen masks audit was completed?
Every completed oxygen masks audit carries drop test note, pressure reading, and service date photo, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, cabin engineering teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: