Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Workplace Safety & EHS
Oxygen Masks SafetySoftware
Run oxygen masks safety in the field, capture photo evidence, log defects, assign corrective actions, and keep a complete, provable inspection history, all in one workflow.
InspectWrk is the software we provide to run this inspection workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Mask fails to drop
Reported by voice or chat, mask fails to drop is caught late and logged with no evidence tied to the asset.
Low oxygen pressure or spent generator
Low oxygen pressure or spent generator goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
No flow on don
On a manual round no flow on don is easy to miss, and hard to defend to an auditor after the fact.
Cracked hose
Cracked hose lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the whole oxygen masks safety inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
- 1
Inspect
Open the right oxygen masks safety checklist by scanning the asset or location QR tag.
- 2
Capture
Record photos, readings, and signatures, offline where signal is poor.
- 3
Find
AI flags likely defects from the photo and the inspector confirms or overrides.
- 4
Correct
A failed item becomes an owned action with a severity and a deadline.
- 5
Verify
The finding stays open until a named approver signs off proof of the fix.
- 6
Report
A branded report generates on close-out and dashboards update across sites.
Workflow
How Does Oxygen System Safety Run from Hazard Report to Closed Risk Control?
The inspection workflow, end to end: Plan → Inspect → Capture evidence → Record findings → Correct → Re-inspect → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Oxygen Masks Inspection Template
Across the oxygen masks safety portfolio, your oxygen masks controls become a mobile template with required photos and readings on mask stowage and drop test, oxygen generators or supply pressure, flow and don indicators, hoses and connections, and expiry and service dates, aligned to EASA Part-145 and operator cabin standard, so every site inspects to the same standard from day one.
- 2
Capture the Oxygen Masks Check in the Field
On oxygen masks safety programmes, inspectors complete the oxygen masks inspection on iOS or Android, offline where signal is poor, recording drop test note, pressure reading, and service date photo against each point before a named sign-off can close the round.
- 3
Route Oxygen Masks Findings to Verified Closure
For oxygen masks safety field teams, A failed item such as mask fails to drop becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so oxygen masks defects do not resurface unnoticed.
- 4
Report Oxygen Masks Performance
Across multi-site oxygen masks safety rounds, every oxygen masks inspection feeds live dashboards and branded exports, so cabin engineering teams see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for oxygen masks safety
The capabilities that matter for this workflow, and what your team can do with each one.
Oxygen Hazard Reporting
Cabin crew raise a low-pressure bottle, failed drop, or regulator fault on mobile in seconds. Why it matters: a hazard noted in a logbook the safety team sees days later cannot be controlled in time.
Consistent Risk Rating
Each oxygen hazard is rated on a single scale across the fleet. Why it matters: a below-minimum bottle judged informally is treated differently at every base.
Control Action Tracking
Every hazard gets a control action with an owner, deadline, and verified closure. Why it matters: a risk with no assigned control is the gap that lets the same event recur.
Immediate Dispatch Flags
A below-minimum portable bottle or failed mask drop raises an instant risk flag. Why it matters: a bottle flown below its minimum is a passenger safety risk that should never reach pushback.
Repeat-event Trending
Recurring oxygen events trend by fleet type, base, and defect. Why it matters: a mask drop fault that keeps recurring on one type points to a root cause worth fixing once.
Fleet SMS Dashboard
Open oxygen hazards, risk ratings, and overdue controls roll up across tails. Why it matters: the safety manager sees fleet risk without calling each base.
Coverage
What Does an Oxygen Masks Inspection Cover?
An oxygen masks inspection covers mask stowage and drop test, oxygen generators or supply pressure, flow and don indicators, hoses and connections, and expiry and service dates. Cabin engineering teams capture a photo and a reading on each oxygen masks point. They work offline where signal is poor, then sign the oxygen masks round off. So every oxygen masks record proves what was checked, when, and by whom.
What Gets Checked
- Mask stowage and drop test
- Oxygen generators or supply pressure
- Flow and don indicators
- Hoses and connections
- Expiry and service dates
Common Defects It Surfaces
- Mask fails to drop
- Low oxygen pressure or spent generator
- No flow on don
- Cracked hose
- Expired unit
Evidence Captured
- Drop test note
- Pressure reading
- Service date photo
Records align toEASA Part-145operator cabin standard
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Cabin engineering teams
A live view of oxygen masks inspection status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided oxygen masks checks on mobile with offline capture, so mask fails to drop is caught and logged on the spot.
Compliance stakeholders
Searchable oxygen masks history and EASA Part-145-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Aviation teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the oxygen masks safety inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like mask stowage and drop test are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided oxygen masks safety templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as mask fails to drop is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and EASA Part-145 evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to EASA Part-145, and managers see status across every site live. |
Rollout
How Should an Airline Pilot Digital Oxygen Safety Management Before Fleet Rollout?
Pilot on One Aircraft Type
Start with a single fleet type so the oxygen hazard categories, risk-rating scale, and control workflow are validated against real cabin events before rollout to mixed types and other bases.
Access and Roles
Cabin crew get hazard reporting, the safety team gets risk rating and control assignment, and Quality Assurance gets read access to trends per tail number through role-based access.
Before You Switch
Common Questions Before You Start
We already run oxygen masks safety checks on paper. Do we have to change our process?
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
Will field teams actually use it?
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
What happens when a defect is found?
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Oxygen Masks Safety Off Paper?
Inspections Across Industries
View All
Which Oxygen System Safety Templates Should You Start With?
Get started with inspection and audit checklist templates.
Template
Light Vehicle Safety Inspection
Use this template to perform a comprehensive safety inspection of light vehicles. This check ensures all critical components are checked ...
500+GET
Frequently Asked Questions About Oxygen Masks Safety Software
What does Oxygen Masks Safety Software check on an oxygen masks inspection?
Oxygen Masks Safety Software runs a structured oxygen masks inspection covering mask stowage and drop test, oxygen generators or supply pressure, flow and don indicators, hoses and connections, and expiry and service dates. Each point is captured on mobile with a photo and a reading, and a named inspector signs the round off before it can close. The same template runs on every site, so cabin engineering teams work to one standard rather than a version that drifts between locations. Every record proves what was checked, when, and by whom, so the evidence is ready long before an assessor asks for it.
How often should an oxygen masks inspection be done?
How often oxygen masks checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Oxygen Masks Safety Software sets the cadence per site, reminds cabin engineering teams before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset.
Which standards does Oxygen Masks Safety Software support for oxygen masks work?
Oxygen Masks Safety Software keeps oxygen masks checks aligned to EASA Part-145 and operator cabin standard. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, cabin engineering teams export a branded evidence pack built from drop test note, pressure reading, and service date photo, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run oxygen masks checks offline and across multiple sites?
Yes. Oxygen Masks Safety Software is offline-first: teams complete oxygen masks checks on iOS or Android with no signal, capturing drop test note, pressure reading, and service date photo in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So cabin engineering teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What does Oxygen Masks Safety Software do?
Oxygen Masks Safety Software lets aviation teams run oxygen masks safety inspections the same way on every visit, with photos and a sign-off on each oxygen masks safety. Checks run fully offline in plant rooms and remote aviation sites, so a dropped signal never costs you the oxygen masks safety record. Photos and a signature attach to every check, which is what a client or ISO 45001 assessor asks to see later. A failed oxygen masks safety item becomes an assigned task with an owner, a deadline, and a severity.
Last updated: