Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Workplace Safety & EHS
Pushback Tug SafetySoftware
Run pushback tug safety in the field, capture photo evidence, log defects, assign corrective actions, and keep a complete, provable inspection history, all in one workflow.
InspectWrk is the software we provide to run this inspection workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Worn coupling or shear pin
Reported by voice or chat, worn coupling or shear pin is caught late and logged with no evidence tied to the asset.
Brake fade
Brake fade goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Steering play
On a manual round steering play is easy to miss, and hard to defend to an auditor after the fact.
Hydraulic leak
Hydraulic leak lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the whole pushback tug safety inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
- 1
Inspect
Open the right pushback tug safety checklist by scanning the asset or location QR tag.
- 2
Capture
Record photos, readings, and signatures, offline where signal is poor.
- 3
Find
AI flags likely defects from the photo and the inspector confirms or overrides.
- 4
Correct
A failed item becomes an owned action with a severity and a deadline.
- 5
Verify
The finding stays open until a named approver signs off proof of the fix.
- 6
Report
A branded report generates on close-out and dashboards update across sites.
Workflow
How Does a Pushback Tug Safety Report Run from Hazard to Closed Risk Control?
The inspection workflow, end to end: Plan → Inspect → Capture evidence → Record findings → Correct → Re-inspect → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Pushback Tug Inspection Template
Across the pushback tug safety portfolio, your pushback tug controls become a mobile template with required photos and readings on towbar or towbarless coupling, brakes and parking brake, steering and articulation, hydraulics and fluid leaks, and lights and warning beacon, aligned to ISO 45001 and IATA AHM, so every site inspects to the same standard from day one.
- 2
Capture the Pushback Tug Check in the Field
On pushback tug safety programmes, inspectors complete the pushback tug inspection on iOS or Android, offline where signal is poor, recording coupling condition photo, brake test note, and hour-meter reading against each point before a named sign-off can close the round.
- 3
Route Pushback Tug Findings to Verified Closure
For pushback tug safety field teams, A failed item such as worn coupling or shear pin becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so pushback tug defects do not resurface unnoticed.
- 4
Report Pushback Tug Performance
Across multi-site pushback tug safety rounds, every pushback tug inspection feeds live dashboards and branded exports, so ground handling teams see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for pushback tug safety
The capabilities that matter for this workflow, and what your team can do with each one.
Pushback Hazard Reporting
Drivers and supervisors log a pushback hazard with photo, location, and severity in seconds. Why it matters: a hazard captured at the stand can be controlled before it causes a nose-gear event or an injury.
Tug Near-miss Capture
Each near-miss between a tug and an aircraft, person, or another vehicle is recorded with the circumstances. Why it matters: an unreported pushback near-miss is a missed warning the SMS is designed to catch.
Risk Control Assignment
Each control carries an owner, a deadline, and verified closure. Why it matters: a control agreed after a pushback incident but never assigned is the gap that lets the same event recur.
Recurring Hazard Detection
Repeat hazards surface by tug, stand, and shift. Why it matters: the safety manager fixes the root cause of nose-gear and strike risks rather than treating each event in isolation.
SMS Dashboard
Hazards, near-misses, and open controls roll up across the tug fleet and the ramp. Why it matters: the safety manager sees where pushback risk concentrates without waiting for a verbal handover.
Per-tug and Per-stand Evidence Export
A branded SMS evidence pack exports per tug or stand for the auditor. Why it matters: an ISAGO or SMS request becomes a minutes-long export, not a search through hazard forms.
Coverage
What Does a Pushback Tug Inspection Cover?
A pushback tug inspection covers towbar or towbarless coupling, brakes and parking brake, steering and articulation, hydraulics and fluid leaks, and lights and warning beacon. Ground handling teams capture a photo and a reading on each pushback tug point. They work offline where signal is poor, then sign the pushback tug round off. So every pushback tug record proves what was checked, when, and by whom.
What Gets Checked
- Towbar or towbarless coupling
- Brakes and parking brake
- Steering and articulation
- Hydraulics and fluid leaks
- Lights and warning beacon
Common Defects It Surfaces
- Worn coupling or shear pin
- Brake fade
- Steering play
- Hydraulic leak
- Inoperative beacon
Evidence Captured
- Coupling condition photo
- Brake test note
- Hour-meter reading
Records align toISO 45001IATA AHM
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Ground handling teams
A live view of pushback tug inspection status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided pushback tug checks on mobile with offline capture, so worn coupling or shear pin is caught and logged on the spot.
Compliance stakeholders
Searchable pushback tug history and ISO 45001-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Aviation teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the pushback tug safety inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like towbar or towbarless coupling are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided pushback tug safety templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as worn coupling or shear pin is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and ISO 45001 evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to ISO 45001, and managers see status across every site live. |
Rollout
How Should Ground Handlers Pilot Digital Tug Safety Before Fleet Rollout?
Pilot on One Base
Start with a single base so the hazard categories, the SMS risk matrix, and the control workflow are validated against real pushback reports before rollout to other stations and contracted handlers.
Access and Roles
Tug drivers get hazard and near-miss capture, supervisors get risk assessment and control assignment, and the safety manager gets read access to the full SMS trail through role-based access.
Before You Switch
Common Questions Before You Start
We already run pushback tug safety checks on paper. Do we have to change our process?
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
Will field teams actually use it?
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
What happens when a defect is found?
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Pushback Tug Safety Off Paper?
Inspections Across Industries
View All
Which Pushback Tug Safety Checklist Templates Should You Start With?
Get started with inspection and audit checklist templates.
Template
Light Vehicle Safety Inspection
Use this template to perform a comprehensive safety inspection of light vehicles. This check ensures all critical components are checked ...
500+GET
Frequently Asked Questions About Pushback Tug Safety Software
What does Pushback Tug Safety Software check on a pushback tug inspection?
Pushback Tug Safety Software runs a structured pushback tug inspection covering towbar or towbarless coupling, brakes and parking brake, steering and articulation, hydraulics and fluid leaks, and lights and warning beacon. Each point is captured on mobile with a photo and a reading, and a named inspector signs the round off before it can close. The same template runs on every site, so ground handling teams work to one standard rather than a version that drifts between locations. Every record proves what was checked, when, and by whom, so the evidence is ready long before an assessor asks for it.
How often should a pushback tug inspection be done?
How often pushback tug checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Pushback Tug Safety Software sets the cadence per site, reminds ground handling teams before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset.
Which standards does Pushback Tug Safety Software support for pushback tug work?
Pushback Tug Safety Software keeps pushback tug checks aligned to ISO 45001 and IATA AHM. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, ground handling teams export a branded evidence pack built from coupling condition photo, brake test note, and hour-meter reading, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run pushback tug checks offline and across multiple sites?
Yes. Pushback Tug Safety Software is offline-first: teams complete pushback tug checks on iOS or Android with no signal, capturing coupling condition photo, brake test note, and hour-meter reading in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So ground handling teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What is Pushback Tug Safety Software?
Pushback Tug Safety Software is the mobile tool Warehouse Managers use to run pushback tug safety inspections across every aviation site from one app. Field staff complete every check on the device, add notes and photos, and the pushback tug safety record uploads once back online. Each entry is timestamped and tied to a named person and the asset, so a "done" tick always has evidence behind it. When an inspector flags a problem, it routes to whoever owns the fix and reports back once it is done.
Last updated: