Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Quality & Compliance
Taxiway Audit Software
Plan and score taxiway audit, capture evidence against every requirement, turn findings into tracked corrective actions, and produce audit-ready reports, all in one workflow.
InspectWrk is the software we provide to run this audit workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Faded centreline marking
Reported by voice or chat, faded centreline marking is caught late and logged with no evidence tied to the asset.
Unserviceable edge lights
Unserviceable edge lights goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Foreign object debris
On a manual round foreign object debris is easy to miss, and hard to defend to an auditor after the fact.
Pavement cracking
Pavement cracking lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the taxiway audit as a scored assessment that produces a defensible pack: plan, score against the rubric, evidence every finding, and drive corrective action to closure.
- 1
Plan
Schedule the taxiway audit and load the rubric the regulator, insurer, or client expects.
- 2
Score
Assess each category and score it, so the result is comparable audit to audit.
- 3
Evidence
Attach a photo and note to each finding, with inspector, timestamp, and location.
- 4
Finding
Every non-conformance becomes a corrective action with a severity and owner.
- 5
CAPA
Actions stay open until a named approver verifies the fix.
- 6
Report
A branded, scored audit pack exports in one click for the reviewer.
Workflow
How Does a Taxiway Audit Run from a Field Finding to a Scoped, Traceable Evidence Pack?
The audit workflow, end to end: Plan → Assess & score → Capture evidence → Record findings → Corrective action → Verify closure → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Taxiway Audit Template
For Aviation teams running taxiway audit, your taxiway controls become a mobile template with required photos and readings on pavement surface condition, centreline and edge markings, taxiway edge lights, holding-point markings and signage, and shoulders and FOD, aligned to ICAO Annex 14, so every site inspects to the same standard from day one.
- 2
Capture the Taxiway Check in the Field
Inspectors complete the taxiway audit on iOS or Android, offline where signal is poor, recording lighting serviceability photo, marking condition photo, and FOD log against each point before a named sign-off can close the round.
- 3
Route Taxiway Findings to Verified Closure
Across the taxiway audit portfolio, A failed item such as faded centreline marking becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so taxiway defects do not resurface unnoticed.
- 4
Report Taxiway Performance
Every taxiway audit feeds live dashboards and branded exports, so airside operations teams see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for taxiway audit
The capabilities that matter for this workflow, and what your team can do with each one.
Timestamped Finding Capture
Each finding carries an automatic timestamp and named auditor. Why it matters: a finding with a questionable date is one an auditor can challenge, so accurate timing is the foundation of a defensible audit.
Photo Evidence Per Finding
Every finding holds its own photo against the taxiway segment. Why it matters: a photo detached from its finding proves nothing, while a linked photo is the evidence an auditor accepts.
Corrective Action Tracking
Across the taxiway audit portfolio, each finding gets an owner, action, and deadline followed to closure. Why it matters: an open finding with no owner is exactly what an audit re-flags at the next visit.
Verified Closure
On taxiway audit programmes, findings close on evidence, not on a claim that the work was done. Why it matters: a finding closed without proof reopens under scrutiny and damages audit confidence.
Per-segment Audit History
Audit findings attach to each taxiway segment over time. Why it matters: a repeat finding on the same segment signals a systemic issue rather than a one-off.
Scoped Evidence Pack Export
A branded evidence pack exports per taxiway and audit window. Why it matters: an auditor request becomes a minutes-long export instead of a multi-day binder assembly.
Coverage
What Does a Taxiway Audit Cover?
A taxiway audit scores condition against ICAO Annex 14, checking pavement surface condition, centreline and edge markings, taxiway edge lights, holding-point markings and signage, and shoulders and FOD. Each taxiway finding is logged with a photo, a severity, and the failing point. So the taxiway audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
- Pavement surface condition
- Centreline and edge markings
- Taxiway edge lights
- Holding-point markings and signage
- Shoulders and FOD
Common Defects It Surfaces
- Faded centreline marking
- Unserviceable edge lights
- Foreign object debris
- Pavement cracking
- Unclear holding-point signage
Evidence Captured
- Lighting serviceability photo
- Marking condition photo
- FOD log
Records align toICAO Annex 14
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Airside operations teams
A live view of taxiway audit status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided taxiway checks on mobile with offline capture, so faded centreline marking is caught and logged on the spot.
Compliance stakeholders
Searchable taxiway history and ICAO Annex 14-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Aviation teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the taxiway audit job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Periodic scoring | Taxiway audits, covering points like pavement surface condition, are scored on paper, so results are hard to compare across periods or sites. | Each audit is scored against a fixed rubric, so trend and site comparison are genuinely comparable. |
| Evidence per finding | A finding such as faded centreline marking is noted without a photo tied to the asset and time. | Every finding carries a photo, inspector identity, timestamp, and location. |
| Non-conformance to CAPA | Corrective actions live in email with no owner, deadline, or proof the fix happened. | Each non-conformance becomes a tracked action with severity, owner, and verified closure. |
| Audit trail | Historic audit records are scattered and slow to retrieve when a reviewer asks. | Twelve months of scored audits retrieve in one click with the full evidence trail. |
| Audit pack | The pack is assembled by hand the week of the review. | A branded, scored pack aligned to ICAO Annex 14 exports the moment the audit closes. |
Rollout
How Should an Airport Pilot Digital Taxiway Audits Before Rolling Them Out to Every Taxiway?
Pilot on One Taxiway Group
Start with one group of taxiways so the audit scope, finding categories, and evidence-pack format are validated against a real certification audit before rollout to the rest of the system, runways, and aprons.
Access and Roles
Auditors get finding capture and sign-off, action owners get their assigned corrective actions, and the certification team gets read access to the full evidence trail per taxiway through role-based access.
Before You Switch
What Auditors and QHSE Teams Ask
Can it produce a scored, defensible taxiway audit pack?
Yes. Each audit scores against the rubric, every finding carries photo evidence and a timestamp, and a branded pack exports in one click with the full trail a reviewer expects.
How are non-conformances tracked to closure?
Each becomes a corrective action with a severity, an owner, and a deadline, and stays open until a named approver verifies the fix with proof.
Can we compare audit results over time and across sites?
Because each audit scores against the same rubric with enforced definitions, trend and cross-site comparison are genuinely comparable rather than subjective.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Taxiway Audit Off Paper?
Inspections Across Industries
View All
Platform features
Which Taxiway Audit Templates Should You Start With?
Get started with inspection and audit checklist templates.
Template
Light Vehicle Safety Inspection
Use this template to perform a comprehensive safety inspection of light vehicles. This check ensures all critical components are checked ...
500+GET
Frequently Asked Questions About Taxiway Audit Software
What does Taxiway Audit Software check on a taxiway audit?
Taxiway Audit Software runs a scored taxiway audit against ICAO Annex 14, checking pavement surface condition, centreline and edge markings, taxiway edge lights, holding-point markings and signage, and shoulders and FOD. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for airside operations teams rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
How often should a taxiway audit be done?
How often taxiway checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Taxiway Audit Software sets the cadence per site, reminds airside operations teams before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset. Warehouse Managers run taxiway audits on a phone or tablet with Taxiway Audit Software, keeping one record for each taxiway and site.
Which taxiway defects matter most, and what happens if they are missed?
The audit targets the taxiway failures that matter most: faded centreline marking, unserviceable edge lights, foreign object debris, and pavement cracking. Left unchecked, a fault such as faded centreline marking can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so airside operations teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Taxiway Audit Software support for taxiway work?
Taxiway Audit Software keeps taxiway checks aligned to ICAO Annex 14. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, airside operations teams export a branded evidence pack built from lighting serviceability photo, marking condition photo, and FOD log, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run taxiway checks offline and across multiple sites?
Yes. Taxiway Audit Software is offline-first: teams complete taxiway checks on iOS or Android with no signal, capturing lighting serviceability photo, marking condition photo, and FOD log in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So airside operations teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a taxiway audit was completed?
Every completed taxiway audit carries lighting serviceability photo, marking condition photo, and FOD log, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, airside operations teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: