Lift Inspection Audit App turns lift inspection audits into a scored, repeatable programme. Auditors score each lift inspection against weighted criteria, attach photo evidence, and track corrective actions to verified closure across every site. Managers compare lift inspection audit scores across sites and track every corrective action to closure.
Lift Inspection Audit App runs a scored lift audit covering car levelling and ride quality, door operation and reopening safety, emergency alarm and communication, safety gear, ropes, and buffers, and machine-room and controls condition, with a photo and a sign-off required on each point. Without a system, lift findings live on paper and in chat. A lift fault such as mis-levelling at floors slips through. An audit then means rebuilding lift evidence from folders.
Lift Inspection Audit App keeps one record per lift and per site, with photo evidence and a named sign-off. Each lift finding is tracked to verified closure. Lift maintenance teams see lift completion and overdue actions across the facilities management portfolio. Every lift record proves what was checked, when, and by whom.
What to Include in a Lift Inspection Audit App?
A comprehensive lift audit covers the key areas that affect operations and compliance. Audit lift inspection programmes with weighted scoring, photo evidence, and corrective action tracking across sites. Your audit should include sections for car levelling and ride quality, door operation and reopening safety, and emergency alarm and communication, evidence capture, pass/fail or scoring criteria, corrective action assignment, and sign-off, so that nothing is missed and every audit finding is traceable.
How to Use Lift Inspection Audit App
A scored audit only helps if every auditor scores the same way. Follow these steps to run a lift inspection audit:
Open the lift inspection audit template, which carries weighted criteria and a scoring scheme.
Score each lift inspection against the criteria and attach photo evidence for any non-conformance.
Let the app calculate the section and overall lift inspection score so the site is comparable to others.
Raise a corrective action for each failed lift inspection criterion with an owner and due date.
Sign off the lift inspection audit. The scorecard and branded report generate automatically.
What Does a Lift Audit Cover?
A lift audit scores condition against EN 81 and LOLER 1998, checking car levelling and ride quality, door operation and reopening safety, emergency alarm and communication, safety gear, ropes, and buffers, and machine-room and controls condition. Each lift finding is logged with a photo, a severity, and the failing point. So the lift audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
Car levelling and ride quality
Door operation and reopening safety
Emergency alarm and communication
Safety gear, ropes, and buffers
Machine-room and controls condition
Common Defects It Surfaces
Mis-levelling at floors
Doors that fail to reopen on obstruction
Dead emergency alarm
Worn ropes or safety-gear faults
Evidence Captured
Car interior photo
Alarm test note
Machine-room photo
Templates align to EN 81, LOLER 1998.
How Lift Inspection Audit App Scores a Lift Inspection Audit
Step 1
Score Consistently
Weighted criteria are built into the lift inspection audit template.
Step 2
Evidence Every Finding
Auditors attach photo proof for each lift inspection non-conformance.
Step 3
Compare and Act
Scorecards rank sites and failed lift inspection criteria become corrective actions.
See the AI Behind Lift Inspection Audit App
Everything your field team records during lift inspection audit, from photos and voice notes to sign-off, InspectWrk turns into a finished report automatically. Faster, more accurate, and without the retyping.
Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Built to Handle Any Challenge
From data collection to compliance: see how teams use InspectWrk for every use case.
What Lift Inspection Teams Fix When Audits Are Scored the Same Way Everywhere
Lift Inspection work breaks down the moment evidence leaves the form. These are the problems Lift Inspection Audit App is built to remove, and what the team gets back when it does.
Every auditor scores the lift inspection audit differently, so sites cannot be compared
One auditor is strict, another is lenient, and a third skips sections. The lift inspection audit scores come back, but leadership cannot tell whether a low score means a weak site or a tough auditor.
Problem
Lift Inspection scoring depends on which auditor showed up
Lift inspection sections get skipped with no record
Lift Inspection scores are not comparable across sites
Solution
Weighted lift inspection criteria baked into the audit template
Mandatory lift inspection sections, so nothing is skipped
Comparable lift inspection scores that roll up across the estate
The same lift inspection defect comes back every cycle
Mis-levelling at floors, doors that fail to reopen on obstruction, dead emergency alarm, worn ropes or safety-gear faults on the lift inspection are fixed, then reappear weeks later. Each lift inspection defect is treated as fresh because nobody sees it is the third time this quarter. The lift inspection root cause is never addressed.
Problem
Repeat lift inspection defects treated as new every time
No history tying findings to the same lift inspection
Budget spent re-fixing the same lift inspection problem
Root-cause lift inspection work prioritised by evidence
The lift inspection report is still being assembled by hand
Someone spends Friday afternoon collecting lift inspection photos, notes, and audit records into a report. By the time leadership reads it, the lift inspection data is days old and the next problem is already live.
Problem
Lift Inspection reports compiled by hand from photos and notes
Leadership reads lift inspection data that is already days old
Every lift inspection report looks slightly different
Solution
Branded lift inspection reports generate automatically per site and period
Scheduled lift inspection reports reach managers before the morning meeting
One consistent lift inspection report format across the estate
Frequently Asked Questions
What does Lift Inspection Audit App check on a lift audit?
Lift Inspection Audit App runs a scored lift audit against EN 81 and LOLER 1998, checking car levelling and ride quality, door operation and reopening safety, emergency alarm and communication, safety gear, ropes, and buffers, and machine-room and controls condition. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for lift maintenance teams rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
Which lift defects matter most, and what happens if they are missed?
The audit targets the lift failures that matter most: mis-levelling at floors, doors that fail to reopen on obstruction, dead emergency alarm, and worn ropes or safety-gear faults. Left unchecked, a fault such as mis-levelling at floors can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so lift maintenance teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Lift Inspection Audit App support for lift work?
Lift Inspection Audit App keeps lift checks aligned to EN 81 and LOLER 1998. The photos each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, lift maintenance teams pull the records for the site in scope with one search instead of rebuilding them from folders. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run lift checks offline and across multiple sites?
Yes. Lift Inspection Audit App is offline-first: teams complete lift checks on iOS or Android with no signal, capturing photos and the evidence each check requires in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So lift maintenance teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a lift audit was completed?
Every completed lift audit carries car interior photo, alarm test note, and machine-room photo, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, lift maintenance teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Related Facilities Management Apps
Explore other inspection and audit apps for facilities management teams.
