Take a Photo. AI Fills the Form.
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically.
No typing. No manual entry.
Use this anesthesia vaporizer inspection checklist to review vaporizer identification, physical condition, correct mounting, anaesthetic-agent identification, fill port and filler system, and concentration control, recording pass, fail, or N/A and capturing a photo on anything that needs proof.
10 sections20 questions10 to 20 minutesFree
Photo Added
Photo Added
Photo Added10 sections · 20 questions · 10 to 20 minutes · Free
Record the vaporizer make, model, serial number, and the anaesthetic agent.
Confirm the vaporizer is on the device register and within its service interval.
Inspect the vaporizer body, dial, and sight glass for cracks and damage.
Confirm the agent-level window is readable and the level is adequate.
Confirm the vaporizer is seated and locked correctly on the manifold.
Check the interlock prevents more than one vaporizer being on at once.
Confirm the agent label and keyed filler match the vaporizer.
Verify colour coding matches the agent in use.
Inspect the fill port and keyed filler for damage and leaks.
Confirm the fill and drain function without spillage.
Confirm the concentration dial turns smoothly through its full range and detents.
Check the dial returns to zero and the off position locks.
Inspect O-rings, seals, and connections for wear and leaks.
Confirm gas connections are tight.
Perform a vaporizer leak test at the on and off positions and record the result.
Confirm no agent smell or leakage during the test.
Confirm the locking lever and safety interlocks operate correctly.
Check the vaporizer cannot be removed while switched on.
Confirm labels are legible and the exterior is clean.
Confirm calibration and service are current, then record deficiencies and raise a corrective action with owner and due date.
Three steps, about 10 to 20 minutes.
Section by section, one check at a time.
Tap Fail, add a photo, assign who fixes it.
The report is ready the moment you finish.
Paper for a one-off check. The app when every finding needs fixing.
Branded checklist
Customize with your logo and company details.
Quick answer
An anesthesia vaporizer inspection checklist is the structured inspection used to confirm biomedical equipment is calibrated, electrically safe, and fit for clinical use that healthcare teams use to check the key inspection points, assign owners to any failures, and close them with photo proof. Completed in InspectWrk, it is timestamped, works offline, and exports as an audit-ready healthcare report for NABH, NABL and Bio-Medical Waste Management Rules.
An anesthesia vaporizer inspection checklist is the structured inspection used to confirm biomedical equipment is calibrated, electrically safe, and fit for clinical use that healthcare teams use to check vaporizer identification, physical condition, correct mounting, anaesthetic-agent identification, fill port and filler system, and concentration control, capture photo evidence, and track corrective actions to closure. Its job is to confirm biomedical equipment is calibrated, electrically safe, and fit for clinical use. Inspect the anesthesia vaporizer: vaporizer identification, physical condition, correct mounting, anesthetic-agent identification, fill port and filler system, concentration control, seals and connections, leak-related checks, locking and interlock mechanisms, and service documentation. It is sometimes called the Anesthesia Vaporizer Maintenance Checklist or the Anesthesia Machine Vaporizer Inspection Checklist.
Biomedical engineering teams still miss out-of-calibration devices, failed leakage or earth test and flat batteries or silenced alarms when rounds are ticked without calibration label photo, safety-test reading and asset tag photo.
Without service tags, teams reconstruct the evidence from phones instead of proving NABH, NABL and Bio-Medical Waste Management Rules readiness.
It helps infection control nurses and supervisors keep healthcare work consistent, safe, and auditable, with the evidence needed for NABH, NABL and Bio-Medical Waste Management Rules:
A complete anesthesia vaporizer inspection checklist works through vaporizer identification, physical condition, correct mounting, anaesthetic-agent identification, fill port and filler system, and concentration control, then records inspection context, scored checkpoints, and evidence with corrective actions:
Record where and when the inspection runs:
Define what each checkpoint verifies and how results are scored:
Make every finding traceable and actionable:
Follow these steps to run the anesthesia vaporizer inspection checklist:
See how this checklist fits into Healthcare inspection software.
This checklist runs as a mobile inspection app that works fully offline on site, with AI-powered defect detection on every photo. To see it on your own workflows, talk to our team.
Submit an inspection and AI writes the PDF report and Excel sheet for you. No admin, no waiting.
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically.
No typing. No manual entry.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time.
Completely hands-free in the field.
The moment an inspection is submitted, AI summarises the findings and builds a branded PDF report and an Excel sheet for you.
No manual reporting. No copy-paste.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP.
No double entry.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time.
No chasing updates.
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
See this checklist running on your own sites in a 30-minute demo.
Book a Free DemoIt is scoped to the scheduled cadence and controls that infection control nurses, biomedical engineers, facility managers, NABH coordinators run, not a one-off handover walk. It prompts vaporizer identification, physical condition, correct mounting, anaesthetic-agent identification, fill port and filler system, and concentration control, watching for out-of-calibration devices, failed leakage or earth test and flat batteries or silenced alarms, records pass, fail, or N/A with calibration label photo, safety-test reading and asset tag photo on critical items, and raises corrective actions with owners before sign-off. Run in InspectWrk, the record is timestamped and rolls into trend reports so repeat failures surface before the next audit.
They work through each checkpoint to confirm biomedical equipment is calibrated, electrically safe, and fit for clinical use, confirm the required controls are in place, and capture calibration label photo, safety-test reading and asset tag photo on anything that fails or needs proof. Priority failure modes include out-of-calibration devices, failed leakage or earth test and flat batteries or silenced alarms. Each checkpoint takes pass, fail, or N/A, and a failed item stays open until the fix is verified.
It expects calibration label photo, safety-test reading and asset tag photo, plus service tags on failed or critical items, so findings rest on proof rather than memory. Records support NABH, NABL and Bio-Medical Waste Management Rules, and every photo, note, and sign-off stays attached to the inspection instead of living in chat threads.
The anesthesia vaporizer inspection checklist covers vaporizer identification, physical condition, correct mounting, anaesthetic-agent identification, fill port and filler system, and concentration control. On each checkpoint, infection control nurses record pass, fail, or N/A, add a photo on anything that needs proof, and raise a corrective action with an owner and due date. Run in InspectWrk, the inspection is timestamped, traceable to whoever completed it, and exports as a single healthcare report aligned to NABH, NABL and Bio-Medical Waste Management Rules.

Test medical-gas alarms: area and master alarms, alarm activation, audible and visual indicators, pressure conditions, sensor response, and panel status, with test results.

Inspect a mechanical ventilator for operational readiness: power supply, battery, self-test, alarm functionality, oxygen and air supply connections, breathing circuit, tubing and connectors, filters, sensors, display, and controls, with cleaning and inspection documentation.
Inspect the autoclave or steam sterilizer as equipment: chamber condition, door, locking mechanism and gasket, pressure and temperature indicators, controls and cycle settings, alarms, water supply and drainage, leaks and corrosion, cycle records, and sterilization indicators.
Inspect a multiparameter patient monitor: display, power and battery, alarm system, ECG leads, SpO2 sensor, blood-pressure cuff, temperature probe, cables and connectors, and controls, with physical-condition checks, cleaning, and functional testing.