InspectWrk

Arc Flash Label Inspection Checklist

Use this arc flash label inspection checklist to check label presence, label visibility and legibility, equipment identification, required information, label condition and updates, and inspection records and corrective actions, recording pass, fail, or N/A and capturing a photo on anything that needs proof.

6 sections12 questions10 to 20 minutesFree

Arc Flash Label InspectionPlant 2 · Label Presence0 of 3 checked
  • Confirm an arc-flash label is present on each applicable panel and equipment.Worker in orange hard hat, yellow goggles and hi-vis vest standing before cranes and high-risesPhoto Added
  • Record equipment without a required label as a deficiency.Worker in orange hard hat, yellow goggles and hi-vis vest standing before cranes and high-risesPhoto Added
  • Check the label is visible, undamaged, and not faded or obscured.Worker in orange hard hat, yellow goggles and hi-vis vest standing before cranes and high-risesPhoto Added
Free on iOS and AndroidGet the App

What’s in this checklist.

6 sections · 12 questions · 10 to 20 minutes · Free

    1. Confirm an arc-flash label is present on each applicable panel and equipment.

    2. Record equipment without a required label as a deficiency.

    1. Check the label is visible, undamaged, and not faded or obscured.

    2. Confirm text and warning symbols are legible.

    1. Verify the label identifies the correct equipment and its location.

    1. Confirm the label shows nominal voltage and shock protection boundary.

    2. Confirm the label shows incident energy or PPE category and arc-flash boundary.

    3. Confirm required PPE information is stated.

    1. Check for damaged or missing labels needing replacement.

    2. Confirm labels reflect the latest arc-flash study and are within any review period.

    1. Record inspection evidence for each panel.

    2. Raise a corrective action with an owner for each label deficiency.

How the Arc Flash Label Inspection checklist works.

Three steps, about 10 to 20 minutes.

  1. Work through each section

    Section by section, one check at a time.

  2. Log every finding

    Tap Fail, add a photo, assign who fixes it.

  3. Sign off and share

    The report is ready the moment you finish.

Same checklist, two ways to run it.

Paper for a one-off check. The app when every finding needs fixing.

Printed PDF

  • Pen on paper
  • Photos in your camera roll
  • Report typed up later

InspectWrk appRecommended

  • Photos on every finding
  • Owner and due date per finding
  • Report ready at sign-off
Get the App

Branded checklist

Get Your Company Branded Checklist

Customize with your logo and company details.

We respect your privacy. No spam, ever.

What is an arc flash label inspection checklist?

Quick answer

An arc flash label inspection checklist is the structured inspection used to confirm the arc flash label remains serviceable, covering label presence, label visibility and legibility, equipment identification, required information, label condition and updates, and inspection records and corrective actions that health & safety teams use to check the key inspection points, assign owners to any failures, and close them with photo proof. Completed in InspectWrk, it is timestamped, works offline, and exports as an audit-ready health & safety report for ISO 45001, OSHA and the Factories Act.

An arc flash label inspection checklist is the structured inspection used to confirm the arc flash label remains serviceable, covering label presence, label visibility and legibility, equipment identification, required information, label condition and updates, and inspection records and corrective actions that health & safety teams use to check label presence, label visibility and legibility, equipment identification, required information, label condition and updates, and inspection records and corrective actions, capture photo evidence, and track corrective actions to closure. Its job is to confirm the arc flash label remains serviceable, covering label presence, label visibility and legibility, equipment identification, required information, label condition and updates, and inspection records and corrective actions. It is sometimes called the Arc Flash Label Checklist or the Electrical Safety Label Checklist.

Why are arc flash label inspections still chased on WhatsApp?

Safety officers, HSE managers and Site supervisors still miss unresolved arc flash label defects and repeat findings when rounds are ticked without inspection records.

Without inspection records, teams reconstruct the evidence from phones instead of proving ISO 45001, OSHA and the Factories Act readiness.

Before and After InspectWrk

Before InspectWrk

  • Toolbox talks, JSAs, and near-miss reports are logged verbally on the radio or on paper at end of shift.
  • Arc flash label checks are ticked on paper without photo evidence per finding.
  • Safety performance is visible only after the corrective window has already closed.

After InspectWrk

  • Safety officers complete the inspection in the app with photo evidence at the arc flash label, even offline.
  • Managers see open findings, closure status, and ISO 45001, OSHA and the Factories Act evidence live on one dashboard.
  • Overdue corrective actions escalate automatically so the fix happens before the next near-miss becomes an incident.

Why is an arc flash label inspection checklist important?

It helps safety officers and supervisors keep health & safety work consistent, safe, and auditable, with the evidence needed for ISO 45001, OSHA and the Factories Act:

  • Cover the full inspection: structured checks across label presence, label visibility and legibility, equipment identification, and required information surface unresolved arc flash label defects and repeat findings before they reach handover, audit, or the next shift.
  • Document health & safety findings with the right proof: capture inspection records on every issue so nothing rests on memory.
  • Stop repeat health & safety findings: assign the fix, set a deadline, and escalate overdue actions before the next round comes around.
  • Stay audit-ready: keep one timestamped record for ISO 45001, OSHA and the Factories Act you can export instead of rebuilding it from scattered photos and spreadsheets.

What should be included in an arc flash label inspection checklist?

A complete arc flash label inspection checklist works through label presence, label visibility and legibility, equipment identification, required information, label condition and updates, and inspection records and corrective actions, then records inspection context, scored checkpoints, and evidence with corrective actions:

Inspection context

Record where and when the inspection runs:

  • Site, health & safety location, and asset identification
  • Inspector, date, and the health & safety areas or assets in scope
  • Reference numbers or schedules linked to the checklist

Checkpoints and scoring

Define what each checkpoint verifies and how results are scored:

  • Label Presence
  • Label Visibility & Legibility
  • Equipment Identification
  • Required Information
  • Label Condition & Updates
  • Inspection Records & Corrective Actions
  • 12 fields aligned to the checklist

Evidence and corrective actions

Make every finding traceable and actionable:

  • Capture inspection records on failed or critical items
  • Retain inspection records with the inspection record
  • Sign-off, completion status, and follow-up notes

How do teams use an arc flash label inspection checklist?

Follow these steps to run the arc flash label inspection checklist:

  1. Fill in the arc flash label header: inspector, site, date, and areas in scope.
  2. Work through label presence, label visibility and legibility, equipment identification, required information, label condition and updates, and inspection records and corrective actions in order, recording pass, fail, or N/A.
  3. Attach inspection records wherever a failure or observation needs proof.
  4. Raise actions for unresolved arc flash label defects and repeat findings with owners and deadlines before sign-off.
  5. Review the arc flash label summary, share the report, and keep the record for your audit trail.

See how this checklist fits into AI safety inspection software.

This checklist runs as a mobile inspection app that works fully offline on site, with AI-powered defect detection on every photo. To see it on your own workflows, talk to our team.

AI-Powered Features for Your Field Workflows

Submit an inspection and AI writes the PDF report and Excel sheet for you. No admin, no waiting.

01 / 05Photo to formVISION AI

Take a Photo. AI Fills the Form.

Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically.

No typing. No manual entry.

02 / 05Voice to textVOICE AI

Speak. AI Writes It Down.

Inspectors speak their observations in any language. AI transcribes and fills the form in real time.

Completely hands-free in the field.

03 / 05Auto reportsREPORT AI

AI Writes the Report. PDF and Excel, Instantly.

The moment an inspection is submitted, AI summarises the findings and builds a branded PDF report and an Excel sheet for you.

No manual reporting. No copy-paste.

04 / 05IntegrationsINTEGRATIONS

Connect Your Existing Tools.

InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP.

No double entry.

05 / 05Live dashboardLIVE DATA

Live Dashboard. Every Site. Always On.

Your operations team sees completion rates, open issues, and compliance scores across all sites in real time.

No chasing updates.

One Platform. Mobile-First. AI-Powered.

  • Collaborate

    Collaborate with your team anytime, anywhere

    See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.

    • Organise inspection data by site, team, and date
    • Assign checks to the inspector or vendor responsible
    • Track completion across every location in one view
    • Keep field and back-office in sync in real time
    • Comment on findings without leaving the inspection
  • Custom Reports

    Custom reports that guide your decision making

    Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.

    • Branded PDF and CSV export from any completed inspection
    • Schedule weekly or monthly delivery to managers and clients
    • Share to email, Drive, Teams, or Slack in one click
    • Filter findings by site, severity, or corrective-action status
  • Powerful Analytics

    Analyse your inspection data with confidence

    See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.

    Powerful dashboard
    Combine multiple reports into one dashboard so you can monitor status, bottlenecks, and completion trends at a glance.
    Always in sync
    Changes sync across devices so inspectors, supervisors, and back-office teams always see the latest responses and attachments.
    Embedded analytics
    Explore checklist data with charts and breakdowns that stay tied to the underlying inspections, without exporting to spreadsheets.

Arc Flash Label Inspectionquestions

See this checklist running on your own sites in a 30-minute demo.

Book a Free Demo

It is scoped to the scheduled cadence and controls that safety officers, HSE managers, site supervisors, compliance leads run, not a one-off handover walk. It prompts label presence, label visibility and legibility, equipment identification, required information, label condition and updates, and inspection records and corrective actions, watching for unresolved arc flash label defects and repeat findings, records pass, fail, or N/A with inspection records on critical items, and raises corrective actions with owners before sign-off. Run in InspectWrk, the record is timestamped and rolls into trend reports so repeat failures surface before the next audit.

They work through each checkpoint to confirm the arc flash label remains serviceable, covering label presence, label visibility and legibility, equipment identification, required information, label condition and updates, and inspection records and corrective actions, confirm the required controls are in place, and capture inspection records on anything that fails or needs proof. Priority failure modes include unresolved arc flash label defects and repeat findings. Each checkpoint takes pass, fail, or N/A, and a failed item stays open until the fix is verified.

It expects inspection records, plus inspection records on failed or critical items, so findings rest on proof rather than memory. Records support ISO 45001, OSHA and the Factories Act, and every photo, note, and sign-off stays attached to the inspection instead of living in chat threads.

The arc flash label inspection checklist covers label presence, label visibility and legibility, equipment identification, required information, label condition and updates, and inspection records and corrective actions. On each checkpoint, safety officers record pass, fail, or N/A, add a photo on anything that needs proof, and raise a corrective action with an owner and due date. Run in InspectWrk, the inspection is timestamped, traceable to whoever completed it, and exports as a single health & safety report aligned to ISO 45001, OSHA and the Factories Act.

More health & safety checklists.

  • Three men in hard hats and orange vests talk on site with radios and a level
    Safety10,200+ downloads

    Grounding & Bonding Inspection Checklist

    Inspect grounding and bonding systems: grounding conductors and electrodes, bonding connections, equipment grounding, continuity, corrosion, and panel connections.

    • Grounding
    • Bonding
    Get Checklist: Grounding & Bonding Inspection Checklist
  • Worker in orange hard hat, yellow goggles and hi-vis vest standing before cranes and high-rises
    Safety9,100+ downloads

    Sprinkler Riser Assembly Inspection Checklist

    Inspect a fire sprinkler riser assembly: riser identification, control valves and valve position, alarm and check valve assembly, pressure gauges, water supply, supervisory devices, tamper and flow switches, test connections, drain, leaks and corrosion, and accessibility, with inspection documentation.

    • Sprinkler riser
    • Fire protection
    Get Checklist: Sprinkler Riser Assembly Inspection Checklist