Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Quality & Compliance
CAPA Software
Run CAPA in the field, capture photo evidence, log defects, assign corrective actions, and keep a complete, provable inspection history, all in one workflow.
InspectWrk is the software we provide to run this inspection workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Unclassified nonconformity
Reported by voice or chat, unclassified nonconformity is caught late and logged with no evidence tied to the asset.
Weak root-cause analysis
Weak root-cause analysis goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Overdue action
On a manual round overdue action is easy to miss, and hard to defend to an auditor after the fact.
Unverified effectiveness
Unverified effectiveness lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the whole CAPA inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
- 1
Inspect
Open the right CAPA checklist by scanning the asset or location QR tag.
- 2
Capture
Record photos, readings, and signatures, offline where signal is poor.
- 3
Find
AI flags likely defects from the photo and the inspector confirms or overrides.
- 4
Correct
A failed item becomes an owned action with a severity and a deadline.
- 5
Verify
The finding stays open until a named approver signs off proof of the fix.
- 6
Report
A branded report generates on close-out and dashboards update across sites.
Workflow
How Does a CAPA Cycle Run from Field Capture to Audit-Ready Reporting?
The inspection workflow, end to end: Plan → Inspect → Capture evidence → Record findings → Correct → Re-inspect → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the CAPA Template
Your controls become a mobile template with required photos and readings on nonconformity capture and classification, root-cause analysis, corrective and preventive actions, effectiveness verification, and due-date and owner tracking, aligned to ISO 9001, FDA 21 CFR 820, and GMP, so every site works to the same standard from day one.
- 2
Capture the Check in the Field
Field teams complete the CAPA management on iOS or Android, offline where signal is poor, recording capa record, root-cause worksheet, and effectiveness-check evidence against each point before a named sign-off can close the round.
- 3
Route Findings to Verified Closure
A failed item such as unclassified nonconformity becomes an owned task with a severity and a deadline, and it stays open until photo proof of the fix is reviewed, so defects do not resurface unnoticed.
- 4
Report Performance
Every check feeds live dashboards and branded exports, so quality and compliance teams see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for CAPA
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
For Cross-Industry teams running CAPA, recurring CAPA cycles auto-schedule by asset and site, and overdue clocks escalate before they become a Cross-Industry compliance gap.
Structured Field Capture
In Cross-Industry CAPA operations, structured CAPA forms force the photo, reading, and sign-off before an item can close, so partial records never ship.
AI-assisted Evidence Capture
Across the CAPA portfolio, during CAPA checks, on-device models surface probable issues from images, reducing keystrokes and overlooked items.
Portfolio Dashboards
On CAPA programmes, CAPA performance rolls up live by site and region, so Operations Directors brief leadership from data rather than anecdote.
Audit-ready Exports
For CAPA field teams, CAPA audit packs build themselves from the live record, so Cross-Industry reviews never start with a folder-and-email scramble.
Offline-first Mobile Apps
Across multi-site CAPA rounds, iOS and Android apps cache CAPA templates and submissions, so basements, plant rooms, and remote sites never block capture.
Coverage
What Does CAPA Management Cover?
CAPA management checks nonconformity capture and classification, root-cause analysis, corrective and preventive actions, effectiveness verification, due-date and owner tracking, and trend and recurrence analysis. Quality and compliance teams capture a photo and a reading on each point, offline where signal is poor, and a named reviewer signs the round off, so every quality and compliance record proves what was checked, when, and by whom, and stays aligned to ISO 9001, FDA 21 CFR 820, and GMP.
What Gets Checked
- Nonconformity capture and classification
- Root-cause analysis
- Corrective and preventive actions
- Effectiveness verification
- Due-date and owner tracking
- Trend and recurrence analysis
Common Defects It Surfaces
- Unclassified nonconformity
- Weak root-cause analysis
- Overdue action
- Unverified effectiveness
- Recurring nonconformity
Evidence Captured
- CAPA record
- Root-cause worksheet
- Effectiveness-check evidence
Records align toISO 9001FDA 21 CFR 820GMP
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Quality and compliance teams
A live view of CAPA management status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided CAPA checks on mobile with offline capture, so unclassified nonconformity is caught and logged on the spot.
Compliance stakeholders
Searchable history and ISO 9001-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Cross-Industry teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the CAPA inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like nonconformity capture and classification are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided CAPA templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as unclassified nonconformity is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and ISO 9001 evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to ISO 9001, and managers see status across every site live. |
Rollout
How Should Cross-Industry Teams Pilot CAPA Digitally Without Disrupting Operations?
Pilot on one site cluster
Begin with one capa template on a single cluster of cross-industry sites, then read completion rates and closure times before you widen the rollout.
Scale templates and roles
Scale the capa programme by cloning the proven template, then adjust it to local cross-industry rules so every site inspects to one standard.
Connect reporting and integrations
Feed capa results into portfolio dashboards and branded exports, and push findings to your CMMS, ERP, or GRC stack through the API where cross-industry teams need it.
Before You Switch
Common Questions Before You Start
We already run CAPA checks on paper. Do we have to change our process?
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
Will field teams actually use it?
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
What happens when a defect is found?
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move CAPA Off Paper?
Inspections Across Industries
View All
Frequently Asked Questions About CAPA Software
What does CAPA Software check in CAPA management?
CAPA Software runs CAPA management covering nonconformity capture and classification, root-cause analysis, corrective and preventive actions, effectiveness verification, and due-date and owner tracking. Each point is captured on mobile with a photo, and a reading where one applies, then a named reviewer signs the round off before it can close. The same template runs on every site, so quality and compliance teams get one consistent standard across the quality and compliance portfolio, and every record proves what was checked, when, and by whom.
Which CAPA problems does CAPA Software help catch?
The programme targets the failures that matter most: unclassified nonconformity, weak root-cause analysis, overdue action, and unverified effectiveness. When a check fails, it becomes an assigned task with an owner, a severity, and a deadline, and it stays open until photo proof of the fix is reviewed. Repeat failures are flagged, so teams fix the cause rather than the symptom. For quality and compliance teams, that turns unclassified nonconformity from a note lost in a chat thread into a tracked action with verified closure across every quality and compliance site.
Which standards does CAPA Software support?
CAPA Software keeps CAPA work aligned to ISO 9001, FDA 21 CFR 820, and GMP. The photos, readings, and sign-offs each standard expects are required fields, so an incomplete check cannot close and a gap is caught before an assessor finds it. When a review is due, quality and compliance teams export a branded pack and a searchable history for the site in scope, built from the live record with capa record, root-cause worksheet, and effectiveness-check evidence rather than rebuilt from folders and email. That keeps evidence defensible at any time, not only in the week before an audit.
Can teams run CAPA checks offline and across multiple sites?
Yes. Field teams complete CAPA checks on iOS or Android with no signal, capturing capa record, root-cause worksheet, and effectiveness-check evidence in the field, and each record syncs when the connection returns with its timestamp and author intact. Because the same template runs on every site, quality and compliance teams get one consistent standard across the quality and compliance portfolio and a live view of what is complete, overdue, or failing per location, without waiting for a site to email a report.
How do teams roll out CAPA Software?
Most quality and compliance teams start on one template and a single cluster of sites, watching completion and closure time from day one. The checks that cause the most chasing today go first: nonconformity capture and classification, root-cause analysis, corrective and preventive actions, effectiveness verification, and due-date and owner tracking. Once field teams trust the digital record and findings reach verified closure, the same template scales across the estate, and new sites inherit the approved programme on day one so the standard does not drift. Quality and compliance teams keep one view of the work across every location as the portfolio grows.
Does CAPA Software work with a CMMS or asset register?
CAPA Software runs alongside the systems you already use. Findings and readings can flow into a CMMS, ERP, or asset register through the API, so those systems hold verified field data instead of re-keyed notes. It owns the part they were never built for: offline capture, photo evidence, and a fast audit pack built from capa record, root-cause worksheet, and effectiveness-check evidence. Teams keep work orders and finance where they are, and add the CAPA management layer where the evidence is captured, so the record and the work order finally agree.
Last updated: