Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Fleet & Transport
DVIR Inspection AuditSoftware
Plan and score DVIR inspection audit, capture evidence against every requirement, turn findings into tracked corrective actions, and produce audit-ready reports, all in one workflow.
InspectWrk is the software we provide to run this audit workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Brake fade
Reported by voice or chat, brake fade is caught late and logged with no evidence tied to the asset.
Fluid leaks
Fluid leaks goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Inoperative lights
On a manual round inoperative lights is easy to miss, and hard to defend to an auditor after the fact.
Unsecured loads
Unsecured loads lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the DVIR audit as a scored assessment that produces a defensible pack: plan, score against the rubric, evidence every finding, and drive corrective action to closure.
- 1
Plan
Schedule the DVIR audit and load the rubric the regulator, insurer, or client expects.
- 2
Score
Assess each category and score it, so the result is comparable audit to audit.
- 3
Evidence
Attach a photo and note to each finding, with inspector, timestamp, and location.
- 4
Finding
Every non-conformance becomes a corrective action with a severity and owner.
- 5
CAPA
Actions stay open until a named approver verifies the fix.
- 6
Report
A branded, scored audit pack exports in one click for the reviewer.
Workflow
How Does a DVIR Inspection Audit Programme Run from Field Capture to Leadership Reporting?
The audit workflow, end to end: Plan → Assess & score → Capture evidence → Record findings → Corrective action → Verify closure → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the DVIR Audit Template
On DVIR inspection audit programmes, your DVIR controls become a mobile template with required photos and readings on lights horns and mirrors, tyres brakes and steering, fluid levels and leaks, body damage and load security, and documents and defect reporting, aligned to ISO 45001 and local roadworthiness rules, so every site inspects to the same standard from day one.
- 2
Capture the DVIR Check in the Field
Inspectors complete the DVIR audit on iOS or Android, offline where signal is poor, recording defect photo, odometer or hour-meter reading, and walk-around photo against each point before a named sign-off can close the round.
- 3
Route DVIR Findings to Verified Closure
Across multi-site DVIR inspection audit rounds, A failed item such as brake fade becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so DVIR defects do not resurface unnoticed.
- 4
Report DVIR Performance
Every DVIR audit feeds live dashboards and branded exports, so operations directors see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for DVIR inspection audit
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
DVIR Inspection Audit cadence is enforced per asset: the next check is booked the moment the last one closes, so nothing silently slips off the plan.
Structured Field Capture
Mobile DVIR inspection audit templates with required evidence fields eliminate clipboard gaps and WhatsApp photo trails.
AI-assisted Evidence Capture
On-device AI flags likely defects in DVIR inspection audit photos and pre-fills findings, so inspectors type less and miss less in the field.
Portfolio Dashboards
One screen shows every site's DVIR inspection audit status, so Operations Directors spot the failing location before it becomes a Transport & Logistics incident.
Audit-ready Exports
In Transport & Logistics DVIR inspection audit operations, branded PDF packs and searchable DVIR inspection audit history assemble Transport & Logistics audit evidence for clients, insurers, and regulators in minutes.
Offline-first Mobile Apps
DVIR Inspection Audit rounds run fully offline on mobile and sync when signal returns, with no re-keying of what was captured.
Coverage
What Does a DVIR Audit Cover?
A DVIR audit scores condition against ISO 45001 and local roadworthiness rules, checking lights horns and mirrors, tyres brakes and steering, fluid levels and leaks, body damage and load security, and documents and defect reporting. Each DVIR finding is logged with a photo, a severity, and the failing point. So the DVIR audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
- Lights horns and mirrors
- Tyres brakes and steering
- Fluid levels and leaks
- Body damage and load security
- Documents and defect reporting
Common Defects It Surfaces
- Brake fade
- Fluid leaks
- Inoperative lights
- Unsecured loads
Evidence Captured
- Defect photo
- Odometer or hour-meter reading
- Walk-around photo
Records align toISO 45001local roadworthiness rules
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Operations Directors
A live view of DVIR audit status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided DVIR checks on mobile with offline capture, so brake fade is caught and logged on the spot.
Compliance stakeholders
Searchable DVIR history and ISO 45001-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Transport & Logistics teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the DVIR audit job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Periodic scoring | DVIR audits, covering points like lights horns and mirrors, are scored on paper, so results are hard to compare across periods or sites. | Each audit is scored against a fixed rubric, so trend and site comparison are genuinely comparable. |
| Evidence per finding | A finding such as brake fade is noted without a photo tied to the asset and time. | Every finding carries a photo, inspector identity, timestamp, and location. |
| Non-conformance to CAPA | Corrective actions live in email with no owner, deadline, or proof the fix happened. | Each non-conformance becomes a tracked action with severity, owner, and verified closure. |
| Audit trail | Historic audit records are scattered and slow to retrieve when a reviewer asks. | Twelve months of scored audits retrieve in one click with the full evidence trail. |
| Audit pack | The pack is assembled by hand the week of the review. | A branded, scored pack aligned to ISO 45001 exports the moment the audit closes. |
Rollout
How Should Teams Pilot Digital DVIR Inspection Audit Workflows Before Portfolio Rollout?
Pilot on one site cluster
Begin with one DVIR inspection audit template on a single cluster of transport & logistics sites, then read completion rates and closure times before you widen the rollout.
Scale templates and roles
Scale the DVIR inspection audit programme by cloning the proven template, then adjust it to local transport & logistics rules so every site inspects to one standard.
Connect reporting and integrations
Feed DVIR inspection audit results into portfolio dashboards and branded exports, and push findings to your CMMS, ERP, or GRC stack through the API where transport & logistics teams need it.
Before You Switch
What Auditors and QHSE Teams Ask
Can it produce a scored, defensible DVIR audit pack?
Yes. Each audit scores against the rubric, every finding carries photo evidence and a timestamp, and a branded pack exports in one click with the full trail a reviewer expects.
How are non-conformances tracked to closure?
Each becomes a corrective action with a severity, an owner, and a deadline, and stays open until a named approver verifies the fix with proof.
Can we compare audit results over time and across sites?
Because each audit scores against the same rubric with enforced definitions, trend and cross-site comparison are genuinely comparable rather than subjective.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move DVIR Inspection Audit Off Paper?
Inspections Across Industries
View All
Which DVIR Inspection Audit Templates Should You Start With?
Get started with inspection and audit checklist templates.
Template
Light Vehicle Safety Inspection
Use this template to perform a comprehensive safety inspection of light vehicles. This check ensures all critical components are checked ...
500+GET
Frequently Asked Questions About DVIR Inspection Audit Software
What does DVIR Inspection Audit Software check on a DVIR audit?
DVIR Inspection Audit Software runs a scored DVIR audit against ISO 45001 and local roadworthiness rules, checking lights horns and mirrors, tyres brakes and steering, fluid levels and leaks, body damage and load security, and documents and defect reporting. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for operations directors rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
How often should a DVIR audit be done?
How often DVIR checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. DVIR Inspection Audit Software sets the cadence per site, reminds operations directors before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset. DVIR Inspection Audit Software lets transport & logistics teams run DVIR audits the same way on every visit, with photos and a sign-off on each DVIR.
Which DVIR defects matter most, and what happens if they are missed?
The audit targets the DVIR failures that matter most: brake fade, fluid leaks, inoperative lights, and unsecured loads. Left unchecked, a fault such as brake fade can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so operations directors fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does DVIR Inspection Audit Software support for DVIR work?
DVIR Inspection Audit Software keeps DVIR checks aligned to ISO 45001 and local roadworthiness rules. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, operations directors export a branded evidence pack built from defect photo, odometer or hour-meter reading, and walk-around photo, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run DVIR checks offline and across multiple sites?
Yes. DVIR Inspection Audit Software is offline-first: teams complete DVIR checks on iOS or Android with no signal, capturing defect photo, odometer or hour-meter reading, and walk-around photo in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So operations directors get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a DVIR audit was completed?
Every completed DVIR audit carries defect photo, odometer or hour-meter reading, and walk-around photo, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, operations directors can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: