Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Manufacturing
Machine InspectionSoftware
Run machine inspection in the field, capture photo evidence, log defects, assign corrective actions, and keep a complete, provable inspection history, all in one workflow.
InspectWrk is the software we provide to run this inspection workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Missing or defeated guards
Reported by voice or chat, missing or defeated guards is caught late and logged with no evidence tied to the asset.
Failed interlocks or e-stops
Failed interlocks or e-stops goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
No isolation or lock-out
On a manual round no isolation or lock-out is easy to miss, and hard to defend to an auditor after the fact.
Exposed pinch points
Exposed pinch points lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the whole machine inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
- 1
Inspect
Open the right machine checklist by scanning the asset or location QR tag.
- 2
Capture
Record photos, readings, and signatures, offline where signal is poor.
- 3
Find
AI flags likely defects from the photo and the inspector confirms or overrides.
- 4
Correct
A failed item becomes an owned action with a severity and a deadline.
- 5
Verify
The finding stays open until a named approver signs off proof of the fix.
- 6
Report
A branded report generates on close-out and dashboards update across sites.
Workflow
How Does a Machine Inspection Cycle Run from Field Capture to Audit-Ready Reporting?
The inspection workflow, end to end: Plan → Inspect → Capture evidence → Record findings → Correct → Re-inspect → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Machine Inspection Template
Your machine controls become a mobile template with required photos and readings on fixed and interlocked guards in place, emergency stops and reset, isolation and lock-out points, moving parts and pinch points, and warning signage and operator training, aligned to ISO 12100 and OSHA 1910.212, so every site inspects to the same standard from day one.
- 2
Capture the Machine Check in the Field
Inspectors complete the machine inspection on iOS or Android, offline where signal is poor, recording guard photo, e-stop test note, and isolation point photo against each point before a named sign-off can close the round.
- 3
Route Machine Findings to Verified Closure
A failed item such as missing or defeated guards becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so machine defects do not resurface unnoticed.
- 4
Report Machine Performance
For Manufacturing teams running machine inspection, every machine inspection feeds live dashboards and branded exports, so quality managers see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for machine inspection
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
On machine inspection programmes, machine Inspection cadence is enforced per asset: the next check is booked the moment the last one closes, so nothing silently slips off the plan.
Structured Field Capture
For machine inspection field teams, mobile machine inspection templates with required evidence fields eliminate clipboard gaps and WhatsApp photo trails.
AI-assisted Evidence Capture
Across multi-site machine inspection rounds, image recognition pre-tags machine inspection findings, so a Manufacturing inspector spends time judging risk rather than writing it up.
Portfolio Dashboards
Where machine inspection evidence has to hold up, quality Managers see machine inspection completion, overdue actions, and risk hotspots across the Manufacturing portfolio without assembling a report.
Audit-ready Exports
On every machine inspection cycle, branded PDF packs and searchable machine inspection history assemble Manufacturing audit evidence for clients, insurers, and regulators in minutes.
Offline-first Mobile Apps
For Manufacturing teams running machine inspection, no signal, no problem: machine inspection evidence is captured on-device and uploaded the moment the inspector is back in range.
Coverage
What Does a Machine Inspection Cover?
A machine inspection covers fixed and interlocked guards in place, emergency stops and reset, isolation and lock-out points, moving parts and pinch points, and warning signage and operator training. Quality managers capture a photo and a reading on each machine point. They work offline where signal is poor, then sign the machine round off. So every machine record proves what was checked, when, and by whom.
What Gets Checked
- Fixed and interlocked guards in place
- Emergency stops and reset
- Isolation and lock-out points
- Moving parts and pinch points
- Warning signage and operator training
Common Defects It Surfaces
- Missing or defeated guards
- Failed interlocks or e-stops
- No isolation or lock-out
- Exposed pinch points
Evidence Captured
- Guard photo
- E-stop test note
- Isolation point photo
Records align toISO 12100OSHA 1910.212
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Quality Managers
A live view of machine inspection status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided machine checks on mobile with offline capture, so missing or defeated guards is caught and logged on the spot.
Compliance stakeholders
Searchable machine history and ISO 12100-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Manufacturing teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the machine inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like fixed and interlocked guards in place are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided machine templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as missing or defeated guards is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and ISO 12100 evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to ISO 12100, and managers see status across every site live. |
Rollout
How Should Manufacturing Teams Pilot Machine Inspection Digitally Without Disrupting Operations?
Pilot on one site cluster
Begin with one machine inspection template on a single cluster of manufacturing sites, then read completion rates and closure times before you widen the rollout.
Scale templates and roles
Scale the machine inspection programme by cloning the proven template, then adjust it to local manufacturing rules so every site inspects to one standard.
Connect reporting and integrations
Feed machine inspection results into portfolio dashboards and branded exports, and push findings to your CMMS, ERP, or GRC stack through the API where manufacturing teams need it.
Before You Switch
Common Questions Before You Start
We already run machine checks on paper. Do we have to change our process?
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
Will field teams actually use it?
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
What happens when a defect is found?
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Machine Inspection Off Paper?
Inspections Across Industries
View All
Which Machine Inspection Checklist Templates Should You Try First?
Get started with inspection and audit checklist templates.
Template
Shift Start Production Readiness Checklist
Use this Shift Start Production Readiness inspection to verify critical checkpoints and safety controls, compliance records and sign-off and corrective actions with photo evidence…
500+GET
Template
End of Shift Shutdown & Handover Checklist - FREE PDF
Use this End of Shift Shutdown & Handover inspection to verify critical checkpoints and safety controls, compliance records and sign-off and corrective actions with photo evidence…
500+GET
Which Machine Inspection Apps Run on iOS and Android?
Use these apps to run inspections and audits.
Frequently Asked Questions About Machine Inspection Software
What does Machine Inspection Software check on a machine inspection?
Machine Inspection Software runs a structured machine inspection covering fixed and interlocked guards in place, emergency stops and reset, isolation and lock-out points, moving parts and pinch points, and warning signage and operator training. Each point is captured on mobile with a photo and a reading, and a named inspector signs the round off before it can close. The same template runs on every site, so quality managers work to one standard rather than a version that drifts between locations. Every record proves what was checked, when, and by whom, so the evidence is ready long before an assessor asks for it.
How often should a machine inspection be done?
How often machine checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Machine Inspection Software sets the cadence per site, reminds quality managers before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset. Quality Managers run machine inspections on a phone or tablet with Machine Inspection Software, keeping one record for each machine and site.
Which machine defects matter most, and what happens if they are missed?
The inspection targets the machine failures that matter most: missing or defeated guards, failed interlocks or e-stops, no isolation or lock-out, and exposed pinch points. Left unchecked, a fault such as missing or defeated guards can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so quality managers fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Machine Inspection Software support for machine work?
Machine Inspection Software keeps machine checks aligned to ISO 12100 and OSHA 1910.212. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, quality managers export a branded evidence pack built from guard photo, e-stop test note, and isolation point photo, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run machine checks offline and across multiple sites?
Yes. Machine Inspection Software is offline-first: teams complete machine checks on iOS or Android with no signal, capturing guard photo, e-stop test note, and isolation point photo in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So quality managers get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a machine inspection was completed?
Every completed machine inspection carries guard photo, e-stop test note, and isolation point photo, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, quality managers can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: