Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Inspection & Field Operations
NABH Software
Run NABH in the field, capture photo evidence, log defects, assign corrective actions, and keep a complete, provable inspection history, all in one workflow.
InspectWrk is the software we provide to run this inspection workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Patient identification lapse
Reported by voice or chat, patient identification lapse is caught late and logged with no evidence tied to the asset.
Infection control breach
Infection control breach goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Medication error
On a manual round medication error is easy to miss, and hard to defend to an auditor after the fact.
Incomplete records or consent
Incomplete records or consent lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the whole NABH inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
- 1
Inspect
Open the right NABH checklist by scanning the asset or location QR tag.
- 2
Capture
Record photos, readings, and signatures, offline where signal is poor.
- 3
Find
AI flags likely defects from the photo and the inspector confirms or overrides.
- 4
Correct
A failed item becomes an owned action with a severity and a deadline.
- 5
Verify
The finding stays open until a named approver signs off proof of the fix.
- 6
Report
A branded report generates on close-out and dashboards update across sites.
Workflow
How Does an NABH Cycle Run from Field Capture to Audit-Ready Reporting?
The inspection workflow, end to end: Plan → Inspect → Capture evidence → Record findings → Correct → Re-inspect → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the NABH Inspection Template
Where NABH evidence has to hold up, your NABH controls become a mobile template with required photos and readings on patient safety and identification, infection control, medication management, records and consent, and facility and equipment safety, aligned to NABH and infection control guidelines, so every site inspects to the same standard from day one.
- 2
Capture the NABH Check in the Field
On every NABH cycle, inspectors complete the NABH inspection on iOS or Android, offline where signal is poor, recording audit finding record, infection control photo, and records sample note against each point before a named sign-off can close the round.
- 3
Route NABH Findings to Verified Closure
For Healthcare teams running NABH, A failed item such as patient identification lapse becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so NABH defects do not resurface unnoticed.
- 4
Report NABH Performance
In Healthcare NABH operations, every NABH inspection feeds live dashboards and branded exports, so clinical engineering leads see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for NABH
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
Across the NABH portfolio, NABH schedules, renewal alerts, and completion tracking keep statutory and contractual cycles visible across the portfolio.
Structured Field Capture
On NABH programmes, NABH capture is standardised across every site, so two inspectors record the same thing the same way on the same form.
AI-assisted Evidence Capture
For NABH field teams, photo analysis suggests defect type and severity during NABH rounds, cutting manual data entry without removing inspector judgement.
Portfolio Dashboards
Across multi-site NABH rounds, portfolio dashboards surface where NABH programmes are slipping, so Clinical Engineering Leads act before a client or regulator does.
Audit-ready Exports
Where NABH evidence has to hold up, searchable NABH records mean any past check is retrievable instantly, so Clinical Engineering Leads stop rebuilding history from drives.
Offline-first Mobile Apps
On every NABH cycle, offline-first capture keeps NABH rounds moving in lifts, basements, and remote Healthcare sites, then reconciles on reconnect.
Coverage
What Does an NABH Inspection Cover?
An NABH inspection covers patient safety and identification, infection control, medication management, records and consent, and facility and equipment safety. Clinical engineering leads capture a photo and a reading on each NABH point. They work offline where signal is poor, then sign the NABH round off. So every NABH record proves what was checked, when, and by whom.
What Gets Checked
- Patient safety and identification
- Infection control
- Medication management
- Records and consent
- Facility and equipment safety
Common Defects It Surfaces
- Patient identification lapse
- Infection control breach
- Medication error
- Incomplete records or consent
- Unsafe facility or equipment
Evidence Captured
- Audit finding record
- Infection control photo
- Records sample note
Records align toNABHinfection control guidelines
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Clinical Engineering Leads
A live view of NABH inspection status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided NABH checks on mobile with offline capture, so patient identification lapse is caught and logged on the spot.
Compliance stakeholders
Searchable NABH history and NABH-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Healthcare teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the NABH inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like patient safety and identification are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided NABH templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as patient identification lapse is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and NABH evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to NABH, and managers see status across every site live. |
Rollout
How Should Healthcare Teams Pilot NABH Digitally Without Disrupting Operations?
Pilot on one site cluster
Pick one healthcare cluster for the initial NABH rollout, confirm the dashboards match what the field sees, then extend template by template.
Scale templates and roles
Roll NABH out site by site, granting contractors scoped access and tying templates to the specific healthcare obligations each location carries.
Connect reporting and integrations
Connect NABH evidence to your reporting and asset systems through the API, so Clinical Engineering Leads get one dashboard and every downstream tool stays in step.
Before You Switch
Common Questions Before You Start
We already run NABH checks on paper. Do we have to change our process?
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
Will field teams actually use it?
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
What happens when a defect is found?
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move NABH Off Paper?
Inspections Across Industries
View All
Which NABH Checklist Templates Should You Try First?
Get started with inspection and audit checklist templates.
Healthcare Compliance
Medical Gas Alarm Test Checklist
Test medical-gas alarms: area and master alarms, alarm activation, audible and visual indicators, pressure conditions, sensor response, and panel status, with test results.
9,400+GET
Biomedical Equipment
Pulse Oximeter Inspection Checklist
Inspect pulse oximeters for operational readiness: device identification, physical condition, display and controls, SpO2 sensor, probe and cable, battery and power, alarm functionality, cleaning and disinfection, and a functional oxygen-saturation readout check, with corrective actions.
8,600+GET
Biomedical Equipment
Glucometer Inspection Checklist
Inspect glucometers and their testing components: device identification, physical condition, display and buttons, battery, test-strip condition and storage, control-solution verification, cleaning and contamination checks, and error indicators, with corrective actions.
7,800+GET
Biomedical Equipment
Autoclave/steam Sterilizer Inspection Checklist
Inspect the autoclave or steam sterilizer as equipment: chamber condition, door, locking mechanism and gasket, pressure and temperature indicators, controls and cycle settings, alarms, water supply and drainage, leaks and corrosion, cycle records, and sterilization indicators.
9,200+GET
Frequently Asked Questions About NABH Software
What does NABH Software check on an NABH inspection?
NABH Software runs a structured NABH inspection covering patient safety and identification, infection control, medication management, records and consent, and facility and equipment safety. Each point is captured on mobile with a photo and a reading, and a named inspector signs the round off before it can close. The same template runs on every site, so clinical engineering leads work to one standard rather than a version that drifts between locations. Every record proves what was checked, when, and by whom, so the evidence is ready long before an assessor asks for it.
How often should an NABH inspection be done?
How often NABH checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. NABH Software sets the cadence per site, reminds clinical engineering leads before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset. In healthcare, NABH Software turns approved NABH checklists into mobile checks field teams complete on any device.
Which standards does NABH Software support for NABH work?
NABH Software keeps NABH checks aligned to NABH and infection control guidelines. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, clinical engineering leads export a branded evidence pack built from audit finding record, infection control photo, and records sample note, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run NABH checks offline and across multiple sites?
Yes. NABH Software is offline-first: teams complete NABH checks on iOS or Android with no signal, capturing audit finding record, infection control photo, and records sample note in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So clinical engineering leads get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What is NABH Software?
In healthcare, NABH Software turns approved NABH checklists into mobile checks field teams complete on any device. Checks run fully offline in plant rooms and remote healthcare sites, so a dropped signal never costs you the NABH record. Because evidence is captured as the work happens, the NABH trail still stands up months after the visit. Each issue stays open until photo proof of the fix is reviewed, so the repair is verified rather than assumed. The record shows what was checked, when, and by whom, so Facilities Managers can answer a query without rebuilding it from folders.
Last updated: