Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Inspection & Field Operations
NABL Software
Run NABL in the field, capture photo evidence, log defects, assign corrective actions, and keep a complete, provable inspection history, all in one workflow.
InspectWrk is the software we provide to run this inspection workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Out-of-calibration equipment
Reported by voice or chat, out-of-calibration equipment is caught late and logged with no evidence tied to the asset.
Unvalidated method
Unvalidated method goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Broken chain of custody
On a manual round broken chain of custody is easy to miss, and hard to defend to an auditor after the fact.
Missing competence record
Missing competence record lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the whole NABL inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
- 1
Inspect
Open the right NABL checklist by scanning the asset or location QR tag.
- 2
Capture
Record photos, readings, and signatures, offline where signal is poor.
- 3
Find
AI flags likely defects from the photo and the inspector confirms or overrides.
- 4
Correct
A failed item becomes an owned action with a severity and a deadline.
- 5
Verify
The finding stays open until a named approver signs off proof of the fix.
- 6
Report
A branded report generates on close-out and dashboards update across sites.
Workflow
How Does an NABL Cycle Run from Field Capture to Audit-Ready Reporting?
The inspection workflow, end to end: Plan → Inspect → Capture evidence → Record findings → Correct → Re-inspect → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the NABL Template
Your controls become a mobile template with required photos and readings on equipment calibration and traceability, method validation and verification, sample handling and chain of custody, competence and authorised-signatory records, and quality control and proficiency testing, aligned to ISO/IEC 17025, and NABL, so every site works to the same standard from day one.
- 2
Capture the Check in the Field
Field teams complete the NABL accreditation on iOS or Android, offline where signal is poor, recording calibration certificate, method validation record, and quality-control chart against each point before a named sign-off can close the round.
- 3
Route Findings to Verified Closure
A failed item such as out-of-calibration equipment becomes an owned task with a severity and a deadline, and it stays open until photo proof of the fix is reviewed, so defects do not resurface unnoticed.
- 4
Report Performance
Every check feeds live dashboards and branded exports, so laboratory quality teams see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for NABL
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
Where NABL evidence has to hold up, statutory and SLA clocks for NABL run automatically, giving Clinical Engineering Leads a live view of what is due, overdue, and signed off.
Structured Field Capture
On every NABL cycle, each NABL entry carries inspector identity, timestamp, and required photos, so a Healthcare record is complete by construction.
AI-assisted Evidence Capture
For Healthcare teams running NABL, during NABL checks, on-device models surface probable issues from images, reducing keystrokes and overlooked items.
Portfolio Dashboards
In Healthcare NABL operations, portfolio dashboards surface where NABL programmes are slipping, so Clinical Engineering Leads act before a client or regulator does.
Audit-ready Exports
Across the NABL portfolio, searchable NABL records mean any past check is retrievable instantly, so Clinical Engineering Leads stop rebuilding history from drives.
Offline-first Mobile Apps
On NABL programmes, field teams complete NABL checks without connectivity; the app stores evidence locally and uploads it later intact.
Coverage
What Does NABL Accreditation Cover?
NABL accreditation checks equipment calibration and traceability, method validation and verification, sample handling and chain of custody, competence and authorised-signatory records, quality control and proficiency testing, and document and record control. Laboratory quality teams capture a photo and a reading on each point, offline where signal is poor, and a named reviewer signs the round off, so every laboratory quality record proves what was checked, when, and by whom, and stays aligned to ISO/IEC 17025, and NABL.
What Gets Checked
- Equipment calibration and traceability
- Method validation and verification
- Sample handling and chain of custody
- Competence and authorised-signatory records
- Quality control and proficiency testing
- Document and record control
Common Defects It Surfaces
- Out-of-calibration equipment
- Unvalidated method
- Broken chain of custody
- Missing competence record
- Failed proficiency test
Evidence Captured
- Calibration certificate
- Method validation record
- Quality-control chart
Records align toISO/IEC 17025NABL
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Laboratory quality teams
A live view of NABL accreditation status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided NABL checks on mobile with offline capture, so out-of-calibration equipment is caught and logged on the spot.
Compliance stakeholders
Searchable history and ISO/IEC 17025-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Healthcare teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the NABL inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like equipment calibration and traceability are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided NABL templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as out-of-calibration equipment is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and ISO/IEC 17025 evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to ISO/IEC 17025, and managers see status across every site live. |
Rollout
How Should Healthcare Teams Pilot NABL Digitally Without Disrupting Operations?
Pilot on one site cluster
Start narrow with a pilot NABL programme on a few sites, so Clinical Engineering Leads can validate evidence quality and correction speed against the old paper baseline.
Scale templates and roles
Extend NABL access to contractors and in-house crews with role-based permissions, and map each template to your healthcare standards and statutory duties.
Connect reporting and integrations
Turn on live NABL reporting for Clinical Engineering Leads, and route readings and defects into the CMMS or compliance system of record so nothing is re-keyed.
Before You Switch
Common Questions Before You Start
We already run NABL checks on paper. Do we have to change our process?
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
Will field teams actually use it?
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
What happens when a defect is found?
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move NABL Off Paper?
Inspections Across Industries
View All
Which NABL Checklist Templates Should You Try First?
Get started with inspection and audit checklist templates.
Healthcare Compliance
Medical Gas Alarm Test Checklist
Test medical-gas alarms: area and master alarms, alarm activation, audible and visual indicators, pressure conditions, sensor response, and panel status, with test results.
9,400+GET
Biomedical Equipment
Pulse Oximeter Inspection Checklist
Inspect pulse oximeters for operational readiness: device identification, physical condition, display and controls, SpO2 sensor, probe and cable, battery and power, alarm functionality, cleaning and disinfection, and a functional oxygen-saturation readout check, with corrective actions.
8,600+GET
Biomedical Equipment
Glucometer Inspection Checklist
Inspect glucometers and their testing components: device identification, physical condition, display and buttons, battery, test-strip condition and storage, control-solution verification, cleaning and contamination checks, and error indicators, with corrective actions.
7,800+GET
Biomedical Equipment
Autoclave/steam Sterilizer Inspection Checklist
Inspect the autoclave or steam sterilizer as equipment: chamber condition, door, locking mechanism and gasket, pressure and temperature indicators, controls and cycle settings, alarms, water supply and drainage, leaks and corrosion, cycle records, and sterilization indicators.
9,200+GET
Frequently Asked Questions About NABL Software
What does NABL Software check in NABL accreditation?
NABL Software runs NABL accreditation covering equipment calibration and traceability, method validation and verification, sample handling and chain of custody, competence and authorised-signatory records, and quality control and proficiency testing. Each point is captured on mobile with a photo, and a reading where one applies, then a named reviewer signs the round off before it can close. The same template runs on every site, so laboratory quality teams get one consistent standard across the laboratory quality portfolio, and every record proves what was checked, when, and by whom.
Which NABL problems does NABL Software help catch?
The programme targets the failures that matter most: out-of-calibration equipment, unvalidated method, broken chain of custody, and missing competence record. When a check fails, it becomes an assigned task with an owner, a severity, and a deadline, and it stays open until photo proof of the fix is reviewed. Repeat failures are flagged, so teams fix the cause rather than the symptom. For laboratory quality teams, that turns out-of-calibration equipment from a note lost in a chat thread into a tracked action with verified closure across every laboratory quality site.
Which standards does NABL Software support?
NABL Software keeps NABL work aligned to ISO/IEC 17025, and NABL. The photos, readings, and sign-offs each standard expects are required fields, so an incomplete check cannot close and a gap is caught before an assessor finds it. When a review is due, laboratory quality teams export a branded pack and a searchable history for the site in scope, built from the live record with calibration certificate, method validation record, and quality-control chart rather than rebuilt from folders and email. That keeps evidence defensible at any time, not only in the week before an audit.
Can teams run NABL checks offline and across multiple sites?
Yes. Field teams complete NABL checks on iOS or Android with no signal, capturing calibration certificate, method validation record, and quality-control chart in the field, and each record syncs when the connection returns with its timestamp and author intact. Because the same template runs on every site, laboratory quality teams get one consistent standard across the laboratory quality portfolio and a live view of what is complete, overdue, or failing per location, without waiting for a site to email a report.
How do teams roll out NABL Software?
Most laboratory quality teams start on one template and a single cluster of sites, watching completion and closure time from day one. The checks that cause the most chasing today go first: equipment calibration and traceability, method validation and verification, sample handling and chain of custody, competence and authorised-signatory records, and quality control and proficiency testing. Once field teams trust the digital record and findings reach verified closure, the same template scales across the estate, and new sites inherit the approved programme on day one so the standard does not drift. Laboratory quality teams keep one view of the work across every location as the portfolio grows.
Does NABL Software work with a CMMS or asset register?
NABL Software runs alongside the systems you already use. Findings and readings can flow into a CMMS, ERP, or asset register through the API, so those systems hold verified field data instead of re-keyed notes. It owns the part they were never built for: offline capture, photo evidence, and a fast audit pack built from calibration certificate, method validation record, and quality-control chart. Teams keep work orders and finance where they are, and add the NABL accreditation layer where the evidence is captured, so the record and the work order finally agree.
Last updated: