Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Quality & Compliance
Underground Inspection AuditSoftware
Plan and score underground inspection audit, capture evidence against every requirement, turn findings into tracked corrective actions, and produce audit-ready reports, all in one workflow.
InspectWrk is the software we provide to run this audit workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Roof or ground instability
Reported by voice or chat, roof or ground instability is caught late and logged with no evidence tied to the asset.
Gas above limit
Gas above limit goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Haul road defect
On a manual round haul road defect is easy to miss, and hard to defend to an auditor after the fact.
Equipment fault
Equipment fault lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the underground audit as a scored assessment that produces a defensible pack: plan, score against the rubric, evidence every finding, and drive corrective action to closure.
- 1
Plan
Schedule the underground audit and load the rubric the regulator, insurer, or client expects.
- 2
Score
Assess each category and score it, so the result is comparable audit to audit.
- 3
Evidence
Attach a photo and note to each finding, with inspector, timestamp, and location.
- 4
Finding
Every non-conformance becomes a corrective action with a severity and owner.
- 5
CAPA
Actions stay open until a named approver verifies the fix.
- 6
Report
A branded, scored audit pack exports in one click for the reviewer.
Workflow
How Does an Underground Inspection Audit Programme Run from Field Capture to Leadership Reporting?
The audit workflow, end to end: Plan → Assess & score → Capture evidence → Record findings → Corrective action → Verify closure → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Underground Audit Template
On every underground inspection audit cycle, your underground controls become a mobile template with required photos and readings on ground and roof support, ventilation and gas levels, haul roads and access, equipment and machinery, and emergency and escape systems, aligned to DGMS and MSHA, so every site inspects to the same standard from day one.
- 2
Capture the Underground Check in the Field
Inspectors complete the underground audit on iOS or Android, offline where signal is poor, recording gas reading with location, support condition photo, and haul road photo against each point before a named sign-off can close the round.
- 3
Route Underground Findings to Verified Closure
In Mining underground inspection audit operations, A failed item such as roof or ground instability becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so underground defects do not resurface unnoticed.
- 4
Report Underground Performance
Every underground audit feeds live dashboards and branded exports, so mine supervisors see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for underground inspection audit
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
In Mining underground inspection audit operations, every underground inspection audit due date, renewal, and re-inspection sits on one calendar, so a lapsed certificate is caught before it expires, not after.
Structured Field Capture
Across the underground inspection audit portfolio, mobile underground inspection audit templates with required evidence fields eliminate clipboard gaps and WhatsApp photo trails.
AI-assisted Evidence Capture
On underground inspection audit programmes, on-device AI flags likely defects in underground inspection audit photos and pre-fills findings, so inspectors type less and miss less in the field.
Portfolio Dashboards
For underground inspection audit field teams, mine Supervisors track underground inspection audit risk hotspots and SLA breaches as they happen, instead of waiting for a manual Friday summary.
Audit-ready Exports
Across multi-site underground inspection audit rounds, underground Inspection Audit evidence exports as a regulator-ready pack with photos and sign-offs intact, filtered to the site under review.
Offline-first Mobile Apps
Where underground inspection audit evidence has to hold up, underground Inspection Audit rounds run fully offline on mobile and sync when signal returns, with no re-keying of what was captured.
Coverage
What Does an Underground Audit Cover?
An underground audit scores condition against DGMS and MSHA, checking ground and roof support, ventilation and gas levels, haul roads and access, equipment and machinery, and emergency and escape systems. Each underground finding is logged with a photo, a severity, and the failing point. So the underground audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
- Ground and roof support
- Ventilation and gas levels
- Haul roads and access
- Equipment and machinery
- Emergency and escape systems
Common Defects It Surfaces
- Roof or ground instability
- Gas above limit
- Haul road defect
- Equipment fault
- Emergency system failure
Evidence Captured
- Gas reading with location
- Support condition photo
- Haul road photo
Records align toDGMSMSHA
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Mine Supervisors
A live view of underground audit status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided underground checks on mobile with offline capture, so roof or ground instability is caught and logged on the spot.
Compliance stakeholders
Searchable underground history and DGMS-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Mining teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the underground audit job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Periodic scoring | Underground audits, covering points like ground and roof support, are scored on paper, so results are hard to compare across periods or sites. | Each audit is scored against a fixed rubric, so trend and site comparison are genuinely comparable. |
| Evidence per finding | A finding such as roof or ground instability is noted without a photo tied to the asset and time. | Every finding carries a photo, inspector identity, timestamp, and location. |
| Non-conformance to CAPA | Corrective actions live in email with no owner, deadline, or proof the fix happened. | Each non-conformance becomes a tracked action with severity, owner, and verified closure. |
| Audit trail | Historic audit records are scattered and slow to retrieve when a reviewer asks. | Twelve months of scored audits retrieve in one click with the full evidence trail. |
| Audit pack | The pack is assembled by hand the week of the review. | A branded, scored pack aligned to DGMS exports the moment the audit closes. |
Rollout
How Should Teams Pilot Digital Underground Inspection Audit Workflows Before Portfolio Rollout?
Pilot on one site cluster
Prove the underground inspection audit workflow on one region first, checking that findings close on time and audit packs assemble cleanly before the next site group joins.
Scale templates and roles
Widen underground inspection audit coverage across the estate with permissions per role and templates that reflect each mining site's regulatory scope.
Connect reporting and integrations
Turn on live underground inspection audit reporting for Mine Supervisors, and route readings and defects into the CMMS or compliance system of record so nothing is re-keyed.
Before You Switch
What Auditors and QHSE Teams Ask
Can it produce a scored, defensible underground audit pack?
Yes. Each audit scores against the rubric, every finding carries photo evidence and a timestamp, and a branded pack exports in one click with the full trail a reviewer expects.
How are non-conformances tracked to closure?
Each becomes a corrective action with a severity, an owner, and a deadline, and stays open until a named approver verifies the fix with proof.
Can we compare audit results over time and across sites?
Because each audit scores against the same rubric with enforced definitions, trend and cross-site comparison are genuinely comparable rather than subjective.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Underground Inspection Audit Off Paper?
Inspections Across Industries
View All
Which Underground Inspection Audit Templates Should You Start With?
Get started with inspection and audit checklist templates.
Template
Settling Pond Checklist Template
A settling pond checklist template provides a reusable inspection layout covering the embankment and freeboard, inlet and outlet structures, liners, seepage, water levels, and signage.
500+GET
Template
Settling Pond Weekly Checklist
A settling pond weekly checklist sets out the weekly checks covering the embankment and freeboard, inlet and outlet structures, liners, seepage, water levels, and signage.
500+GET
Frequently Asked Questions About Underground Inspection Audit Software
What does Underground Inspection Audit Software check on an underground audit?
Underground Inspection Audit Software runs a scored underground audit against DGMS and MSHA, checking ground and roof support, ventilation and gas levels, haul roads and access, equipment and machinery, and emergency and escape systems. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for mine supervisors rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
How often should an underground audit be done?
How often underground checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Underground Inspection Audit Software sets the cadence per site, reminds mine supervisors before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset. Underground Inspection Audit Software moves underground audits off paper, WhatsApp, and spreadsheets into one timestamped record per underground.
Which underground defects matter most, and what happens if they are missed?
The audit targets the underground failures that matter most: roof or ground instability, gas above limit, haul road defect, and equipment fault. Left unchecked, a fault such as roof or ground instability can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so mine supervisors fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Underground Inspection Audit Software support for underground work?
Underground Inspection Audit Software keeps underground checks aligned to DGMS and MSHA. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, mine supervisors export a branded evidence pack built from gas reading with location, support condition photo, and haul road photo, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run underground checks offline and across multiple sites?
Yes. Underground Inspection Audit Software is offline-first: teams complete underground checks on iOS or Android with no signal, capturing gas reading with location, support condition photo, and haul road photo in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So mine supervisors get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves an underground audit was completed?
Every completed underground audit carries gas reading with location, support condition photo, and haul road photo, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, mine supervisors can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: