Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Crane Rigging & Sling Inspection
Use this crane rigging & sling inspection to run checks on sling body for the type in use: webbing for cuts and abrasion, wire rope for broken wires and kinks, or chain for worn, stretched, or bent links, stitching, splices, or ferrules and the end terminations, end fittings, master links, and hooks for wear, deformation, and cracks and heat, chemical, or UV damage and contamination on construction sites so teams can confirm lifting slings are safe to use with a sound body, end fittings, and identification for the sling type in use, scoring each item and raising corrective actions with owners and due dates. Watch for cuts, severe abrasion, or crushed webbing, broken wires, kinks, birdcaging, or corrosion in wire rope and worn, stretched, bent, or cracked chain links. Records support the National Building Code, IS codes and ISO 9001.
Get Your Company Branded Checklist
Customize with your logo and company details.
Available on App
This Checklist Is Also Available in the InspectWrk Mobile App
Run inspections on iOS and Android - no internet required. Capture photos, annotate defects, and generate reports in the field.
Run the Crane Rigging & Sling Inspection as a Digital Inspection
Run the Crane Rigging & Sling Inspection on the InspectWrk app instead of paper. Inspectors capture photo evidence, work offline, and assign corrective actions on the spot, and the report generates itself the moment the inspection is signed off.
Loading checklist preview...
Crane Rigging & Sling Inspection
Crane Rigging & Sling Inspection Dashboard
Prioritized actions to keep operations running smoothly today.
Total Revenue
$42,680
+12% compared to last month
Active Projects
128
+8 new this week
Open Requests
56
-15 resolved this week
Operational Target
You're on track to meet this month's operational goal.
Target Task
200 ↑
Complete Task
136 ↑
Pending Task
10 ↓
Monthly Performance
Recent Client Activity
ClientProjectAssign DateLast UpdateProgress
GreenCoreMEP Walkthrough01/01/20262 days ago
100%
NovaTechKitchen Check12/08/2025Yesterday
60%
BlueWave LtdSite Audit12/12/20252 hrs ago
33%
UrbanLineHandover QA12/08/2025Not started
0%
Harbor FMRoof Inspection01/06/2026Just received
0%
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
Construction Checklists & Forms
Hand-picked templates for your specific industry needs.
Construction
Snagging Inspection Checklist
Catch defects before handover and generate punch list reports in minutes.
52,000+GET
Construction
Kitchen Snagging Checklist
Kitchen snagging: cabinets, worktops, appliances, tiling, plumbing, and electrical checks.
31,200+GET
Construction
Bathroom Snagging Checklist
Bathroom snagging: tiling, sanitaryware, plumbing, ventilation, and finish quality.
28,900+GET
Inspections Across Industries
View All
Frequently Asked Questions
How is a scheduled crane rigging & sling inspection different from a general inspection?
It is scoped to the scheduled cadence and controls that site supervisors, QA QC engineers, contractors, project managers run, not a one-off handover walk. It prompts sling body for the type in use: webbing for cuts and abrasion, wire rope for broken wires and kinks, or chain for worn, stretched, or bent links, stitching, splices, or ferrules and the end terminations, end fittings, master links, and hooks for wear, deformation, and cracks and heat, chemical, or UV damage and contamination, watching for cuts, severe abrasion, or crushed webbing, broken wires, kinks, birdcaging, or corrosion in wire rope and worn, stretched, bent, or cracked chain links, records pass, fail, or N/A with sling tag and identification photo, body and end-fitting close-up and defect photo and out-of-service tag on critical items, and raises corrective actions with owners before sign-off. Run in InspectWrk, the record is timestamped and rolls into trend reports so repeat failures surface before the next audit.
What do site supervisors, QA QC engineers, contractors, project managers check on it?
They work through each checkpoint to confirm lifting slings are safe to use with a sound body, end fittings, and identification for the sling type in use, confirm the required controls are in place, and capture sling tag and identification photo, body and end-fitting close-up and defect photo and out-of-service tag on anything that fails or needs proof. Priority failure modes include cuts, severe abrasion, or crushed webbing, broken wires, kinks, birdcaging, or corrosion in wire rope and worn, stretched, bent, or cracked chain links. Each checkpoint takes pass, fail, or N/A, and a failed item stays open until the fix is verified.
What evidence does it require?
It expects sling tag and identification photo, body and end-fitting close-up and defect photo and out-of-service tag on failed or critical items, so findings rest on proof rather than memory. Records support the National Building Code, IS codes and ISO 9001, and every photo, note, and sign-off stays attached to the inspection instead of living in chat threads.
What does the crane rigging & sling inspection cover?
It checks sling body for the type in use: webbing for cuts and abrasion, wire rope for broken wires and kinks, or chain for worn, stretched, or bent links, stitching, splices, or ferrules and the end terminations, end fittings, master links, and hooks for wear, deformation, and cracks and heat, chemical, or UV damage and contamination across construction sites. The round exists to confirm lifting slings are safe to use with a sound body, end fittings, and identification for the sling type in use. It prioritises failure modes such as cuts, severe abrasion, or crushed webbing, broken wires, kinks, birdcaging, or corrosion in wire rope and worn, stretched, bent, or cracked chain links. Site supervisors record pass, fail, or N/A on each item, capture photo evidence on anything that needs proof, and assign corrective actions with owners and due dates. Evidence expectations include sling tag and identification photo, body and end-fitting close-up and defect photo and out-of-service tag. A failed item stays open until the fix is verified, and it runs offline so a weak signal never costs a round. Run in InspectWrk, every finding is timestamped and exports as a single construction report aligned to the National Building Code, IS codes and ISO 9001.
What is a crane rigging & sling inspection?
Quick Answer
A crane rigging & sling inspection is the structured inspection used to confirm lifting slings are safe to use with a sound body, end fittings, and identification for the sling type in use that construction teams use to check the key inspection points, assign owners to any failures, and close them with photo proof. Completed in InspectWrk, it is timestamped, works offline, and exports as an audit-ready construction report for the National Building Code, IS codes and ISO 9001.
A crane rigging & sling inspection is the structured inspection used to confirm lifting slings are safe to use with a sound body, end fittings, and identification for the sling type in use that construction teams use to check sling body for the type in use: webbing for cuts and abrasion, wire rope for broken wires and kinks, or chain for worn, stretched, or bent links, stitching, splices, or ferrules and the end terminations, end fittings, master links, and hooks for wear, deformation, and cracks and heat, chemical, or UV damage and contamination, capture photo evidence, and track corrective actions to closure.
Why are crane rigging & sling inspections still chased on WhatsApp?
Riggers, slingers, and lifting supervisors still miss cuts, severe abrasion, or crushed webbing, broken wires, kinks, birdcaging, or corrosion in wire rope and worn, stretched, bent, or cracked chain links when rounds are ticked without sling tag and identification photo, body and end-fitting close-up and defect photo and out-of-service tag.
Without a single inspection record, teams reconstruct the evidence from phones instead of proving the National Building Code, IS codes and ISO 9001 readiness.
Before and After InspectWrk
Before InspectWrk
- Snag lists live in Excel files shared on WhatsApp threads.
- Crane rigging sling checks are ticked on paper without photo evidence per finding.
- You hear about open snags from the client during the handover walk, not from your own team.
After InspectWrk
- Site supervisors complete the inspection in the app with photo evidence at the crane rigging & sling inspection, even offline.
- Managers see open findings, closure status, and the National Building Code, IS codes and ISO 9001 evidence live on one dashboard.
- Recurring issues escalate automatically before they reach the client or the National Building Code auditor.
Why is a crane rigging & sling inspection important?
It helps site supervisors and supervisors keep construction work consistent, safe, and auditable, with the evidence needed for the National Building Code, IS codes and ISO 9001:
- Cover the full inspection:structured checks across sling body for the type in use: webbing for cuts and abrasion, wire rope for broken wires and kinks, or chain for worn, stretched, or bent links, stitching, splices, or ferrules and the end terminations, end fittings, master links, and hooks for wear, deformation, and cracks and heat, chemical, or UV damage and contamination surface cuts, severe abrasion, or crushed webbing, broken wires, kinks, birdcaging, or corrosion in wire rope and worn, stretched, bent, or cracked chain links before they reach handover, audit, or the next shift.
- Document construction findings with the right proof:capture sling tag and identification photo, body and end-fitting close-up and defect photo and out-of-service tag on every issue so nothing rests on memory.
- Track construction fixes to closure:each failure becomes an action with an owner, a due date, and a re-inspection that confirms it is done.
- Stay audit-ready:keep one timestamped record for the National Building Code, IS codes and ISO 9001 you can export instead of rebuilding it from scattered photos and spreadsheets.
What should be included in a crane rigging & sling inspection?
A complete crane rigging & sling inspection works through sling body for the type in use: webbing for cuts and abrasion, wire rope for broken wires and kinks, or chain for worn, stretched, or bent links, stitching, splices, or ferrules and the end terminations, end fittings, master links, and hooks for wear, deformation, and cracks and heat, chemical, or UV damage and contamination, then records inspection context, scored checkpoints, and evidence with corrective actions:
Inspection context
Record where and when the inspection runs:
- Site, construction location, and asset identification
- Inspector, date, and the construction areas or assets in scope
- Reference numbers or schedules linked to the checklist
Checkpoints and scoring
Define what each checkpoint verifies and how results are scored:
- sling body for the type in use:webbing for cuts and abrasion, wire rope for broken wires and kinks, or chain for worn, stretched, or bent links
- stitching, splices, or ferrules and the end terminations
- end fittings, master links, and hooks for wear, deformation, and cracks
- heat, chemical, or UV damage and contamination
- identification tag, marking, and safe-working-load label legibility
- correct sling type and reeving for the lift, and storage condition
- Failure watchouts:cuts, severe abrasion, or crushed webbing, broken wires, kinks, birdcaging, or corrosion in wire rope and worn, stretched, bent, or cracked chain links
- Evidence:sling tag and identification photo, body and end-fitting close-up and defect photo and out-of-service tag
- 20 fields aligned to the checklist
Evidence and corrective actions
Make every finding traceable and actionable:
- Capture sling tag and identification photo, body and end-fitting close-up and defect photo and out-of-service tag on failed or critical items
- Corrective actions with owners and due dates for construction teams
- Sign-off, completion status, and follow-up notes
How do teams use a crane rigging & sling inspection?
Follow these steps to run the crane rigging & sling inspection:
- Fill in the crane rigging & sling inspection header: inspector, site, date, and areas in scope.
- Work through sling body for the type in use: webbing for cuts and abrasion, wire rope for broken wires and kinks, or chain for worn, stretched, or bent links, stitching, splices, or ferrules and the end terminations, end fittings, master links, and hooks for wear, deformation, and cracks and heat, chemical, or UV damage and contamination in order, recording pass, fail, or N/A.
- Attach sling tag and identification photo, body and end-fitting close-up and defect photo and out-of-service tag wherever a failure or observation needs proof.
- Raise actions for cuts, severe abrasion, or crushed webbing, broken wires, kinks, birdcaging, or corrosion in wire rope and worn, stretched, bent, or cracked chain links with owners and deadlines before sign-off.
- Review the crane rigging & sling inspection summary, share the report, and keep the record for your audit trail.
See how this checklist fits into Construction inspection software.
This checklist runs as a mobile inspection app that works fully offline on site, with AI-powered defect detection on every photo. To see it on your own workflows, talk to our team.