InspectWrk

Fire Pump Controller Inspection Checklist

Use this fire pump controller inspection checklist to inspect controller identification and enclosure, power supply, indicators and alarms, switches and pressure sensing, manual and automatic start functions, and wiring, terminals and fault indications, scoring each item and raising corrective actions with owners and due dates.

8 sections21 questions12 to 23 minutesFree

Fire Pump Controller InspectionPlant 2 · Controller Identification & Enclosure0 of 3 checked
  • Record the controller tag, location, and the fire pump it serves.Worker in orange hard hat, yellow goggles and hi-vis vest standing before cranes and high-risesPhoto Added
  • Confirm the controller matches the asset register and inspection schedule.Worker in orange hard hat, yellow goggles and hi-vis vest standing before cranes and high-risesPhoto Added
  • Inspect the enclosure, door, and seals for damage and secure fit.Worker in orange hard hat, yellow goggles and hi-vis vest standing before cranes and high-risesPhoto Added
Free on iOS and AndroidGet the App

What’s in this checklist.

8 sections · 21 questions · 12 to 23 minutes · Free

    1. Record the controller tag, location, and the fire pump it serves.

    2. Confirm the controller matches the asset register and inspection schedule.

    3. Inspect the enclosure, door, and seals for damage and secure fit.

    1. Confirm the incoming power supply and connections are correct and secure.

    2. Check the disconnect and isolating means operate correctly.

    1. Verify status indicators and lamps operate.

    2. Test alarms and annunciation for correct signalling.

    1. Check selector switches and controls operate as designed.

    2. Confirm the pressure sensing line and transducer or switch read correctly.

    3. Verify start pressure settings against the design.

    1. Test the automatic start on a pressure drop or start signal.

    2. Test the manual start function.

    3. Confirm the correct run and stop sequence.

    1. Inspect control wiring and terminals for tightness and damage.

    2. Confirm fault and trouble indications operate correctly.

    3. Check for signs of overheating at connections.

    1. Check controller batteries for condition, charge, and secure connections where fitted.

    2. Confirm the charger operates and battery age is within service life.

    1. Record the test results and controller status.

    2. Capture a photo of every failed item as evidence.

    3. Raise a corrective action with an owner and due date, and record the inspection.

How the Fire Pump Controller Inspection checklist works.

Three steps, about 12 to 23 minutes.

  1. Work through each section

    Section by section, one check at a time.

  2. Log every finding

    Tap Fail, add a photo, assign who fixes it.

  3. Sign off and share

    The report is ready the moment you finish.

Same checklist, two ways to run it.

Paper for a one-off check. The app when every finding needs fixing.

Printed PDF

  • Pen on paper
  • Photos in your camera roll
  • Report typed up later

InspectWrk appRecommended

  • Photos on every finding
  • Owner and due date per finding
  • Report ready at sign-off
Get the App

Branded checklist

Get Your Company Branded Checklist

Customize with your logo and company details.

We respect your privacy. No spam, ever.

What is a fire pump controller inspection checklist?

Quick answer

A fire pump controller inspection checklist is the structured inspection used to verify pumps deliver required flow without cavitation, seal failure, or abnormal vibration that health & safety teams use to check the key inspection points, assign owners to any failures, and close them with photo proof. Completed in InspectWrk, it is timestamped, works offline, and exports as an audit-ready health & safety report for ISO 45001, OSHA and the Factories Act.

A fire pump controller inspection checklist is the structured inspection used to verify pumps deliver required flow without cavitation, seal failure, or abnormal vibration that health & safety teams use to check controller identification and enclosure, power supply, indicators and alarms, switches and pressure sensing, manual and automatic start functions, and wiring, terminals and fault indications, capture photo evidence, and track corrective actions to closure. Its job is to verify pumps deliver required flow without cavitation, seal failure, or abnormal vibration. Inspect the fire pump controller and its controls: enclosure, power supply, indicators, alarms, switches, pressure sensing, manual and automatic start functions, wiring and terminals, fault indications, and battery checks, with test records and corrective actions.

Why are fire pump controller inspections still chased on WhatsApp?

Mechanical technicians and facilities engineers still miss seal weep, cavitation noise and dry running when rounds are ticked without gauge readings, seal photo and vibration note.

Without inspection records, teams reconstruct the evidence from phones instead of proving ISO 45001, OSHA and the Factories Act readiness.

Before and After InspectWrk

Before InspectWrk

  • Toolbox talks, JSAs, and near-miss reports are logged verbally on the radio or on paper at end of shift.
  • Fire pump controller checks are ticked on paper without photo evidence per finding.
  • Safety performance is visible only after the corrective window has already closed.

After InspectWrk

  • Safety officers complete the inspection in the app with photo evidence at the fire pump controller, even offline.
  • Managers see open findings, closure status, and ISO 45001, OSHA and the Factories Act evidence live on one dashboard.
  • Overdue corrective actions escalate automatically so the fix happens before the next near-miss becomes an incident.

Why is a fire pump controller inspection checklist important?

It helps safety officers and supervisors keep health & safety work consistent, safe, and auditable, with the evidence needed for ISO 45001, OSHA and the Factories Act:

  • Cover the full inspection: structured checks across controller identification and enclosure, power supply, indicators and alarms, and switches and pressure sensing surface seal weep, cavitation noise and dry running before they reach handover, audit, or the next shift.
  • Document health & safety findings with the right proof: capture gauge readings, seal photo and vibration note on every issue so nothing rests on memory.
  • Track health & safety fixes to closure: each failure becomes an action with an owner, a due date, and a re-inspection that confirms it is done.
  • Stay audit-ready: keep one timestamped record for ISO 45001, OSHA and the Factories Act you can export instead of rebuilding it from scattered photos and spreadsheets.

What should be included in a fire pump controller inspection checklist?

A complete fire pump controller inspection checklist works through controller identification and enclosure, power supply, indicators and alarms, switches and pressure sensing, manual and automatic start functions, and wiring, terminals and fault indications, then records inspection context, scored checkpoints, and evidence with corrective actions:

Inspection context

Record where and when the inspection runs:

  • Site, health & safety location, and asset identification
  • Inspector, date, and the health & safety areas or assets in scope
  • Reference numbers or schedules linked to the checklist

Checkpoints and scoring

Define what each checkpoint verifies and how results are scored:

  • Controller Identification & Enclosure
  • Power Supply
  • Indicators & Alarms
  • Switches & Pressure Sensing
  • Manual & Automatic Start Functions
  • Wiring, Terminals & Fault Indications
  • 15 fields aligned to the checklist

Evidence and corrective actions

Make every finding traceable and actionable:

  • Capture gauge readings, seal photo and vibration note on failed or critical items
  • Retain inspection records with the inspection record
  • Sign-off, completion status, and follow-up notes

How do teams use a fire pump controller inspection checklist?

Follow these steps to run the fire pump controller inspection checklist:

  1. Fill in the fire pump controller header: inspector, site, date, and areas in scope.
  2. Work through controller identification and enclosure, power supply, indicators and alarms, switches and pressure sensing, manual and automatic start functions, and wiring, terminals and fault indications in order, recording pass, fail, or N/A.
  3. Attach gauge readings, seal photo and vibration note wherever a failure or observation needs proof.
  4. Raise actions for seal weep, cavitation noise and dry running with owners and deadlines before sign-off.
  5. Review the fire pump controller summary, share the report, and keep the record for your audit trail.

See how this checklist fits into AI safety inspection software.

This checklist runs as a mobile inspection app that works fully offline on site, with AI-powered defect detection on every photo. To see it on your own workflows, talk to our team.

AI-Powered Features for Your Field Workflows

Submit an inspection and AI writes the PDF report and Excel sheet for you. No admin, no waiting.

01 / 05Photo to formVISION AI

Take a Photo. AI Fills the Form.

Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically.

No typing. No manual entry.

02 / 05Voice to textVOICE AI

Speak. AI Writes It Down.

Inspectors speak their observations in any language. AI transcribes and fills the form in real time.

Completely hands-free in the field.

03 / 05Auto reportsREPORT AI

AI Writes the Report. PDF and Excel, Instantly.

The moment an inspection is submitted, AI summarises the findings and builds a branded PDF report and an Excel sheet for you.

No manual reporting. No copy-paste.

04 / 05IntegrationsINTEGRATIONS

Connect Your Existing Tools.

InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP.

No double entry.

05 / 05Live dashboardLIVE DATA

Live Dashboard. Every Site. Always On.

Your operations team sees completion rates, open issues, and compliance scores across all sites in real time.

No chasing updates.

One Platform. Mobile-First. AI-Powered.

  • Collaborate

    Collaborate with your team anytime, anywhere

    See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.

    • Organise inspection data by site, team, and date
    • Assign checks to the inspector or vendor responsible
    • Track completion across every location in one view
    • Keep field and back-office in sync in real time
    • Comment on findings without leaving the inspection
  • Custom Reports

    Custom reports that guide your decision making

    Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.

    • Branded PDF and CSV export from any completed inspection
    • Schedule weekly or monthly delivery to managers and clients
    • Share to email, Drive, Teams, or Slack in one click
    • Filter findings by site, severity, or corrective-action status
  • Powerful Analytics

    Analyse your inspection data with confidence

    See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.

    Powerful dashboard
    Combine multiple reports into one dashboard so you can monitor status, bottlenecks, and completion trends at a glance.
    Always in sync
    Changes sync across devices so inspectors, supervisors, and back-office teams always see the latest responses and attachments.
    Embedded analytics
    Explore checklist data with charts and breakdowns that stay tied to the underlying inspections, without exporting to spreadsheets.

Fire Pump Controller Inspectionquestions

See this checklist running on your own sites in a 30-minute demo.

Book a Free Demo

It is scoped to the scheduled cadence and controls that safety officers, HSE managers, site supervisors, compliance leads run, not a one-off handover walk. It prompts controller identification and enclosure, power supply, indicators and alarms, switches and pressure sensing, manual and automatic start functions, and wiring, terminals and fault indications, watching for seal weep, cavitation noise and dry running, records pass, fail, or N/A with gauge readings, seal photo and vibration note on critical items, and raises corrective actions with owners before sign-off. Run in InspectWrk, the record is timestamped and rolls into trend reports so repeat failures surface before the next audit.

They work through each checkpoint to verify pumps deliver required flow without cavitation, seal failure, or abnormal vibration, confirm the required controls are in place, and capture gauge readings, seal photo and vibration note on anything that fails or needs proof. Priority failure modes include seal weep, cavitation noise and dry running. Each checkpoint takes pass, fail, or N/A, and a failed item stays open until the fix is verified.

It expects gauge readings, seal photo and vibration note, plus inspection records on failed or critical items, so findings rest on proof rather than memory. Records support ISO 45001, OSHA and the Factories Act, and every photo, note, and sign-off stays attached to the inspection instead of living in chat threads.

The fire pump controller inspection checklist covers controller identification and enclosure, power supply, indicators and alarms, switches and pressure sensing, manual and automatic start functions, and wiring, terminals and fault indications. On each checkpoint, safety officers record pass, fail, or N/A, add a photo on anything that needs proof, and raise a corrective action with an owner and due date. Run in InspectWrk, the inspection is timestamped, traceable to whoever completed it, and exports as a single health & safety report aligned to ISO 45001, OSHA and the Factories Act.

More health & safety checklists.

  • Three men in hard hats and orange vests talk on site with radios and a level
    Safety10,200+ downloads

    Grounding & Bonding Inspection Checklist

    Inspect grounding and bonding systems: grounding conductors and electrodes, bonding connections, equipment grounding, continuity, corrosion, and panel connections.

    • Grounding
    • Bonding
    Get Checklist: Grounding & Bonding Inspection Checklist
  • Worker in orange hard hat, yellow goggles and hi-vis vest standing before cranes and high-rises
    Safety9,100+ downloads

    Arc Flash Label Inspection Checklist

    Verify arc-flash labels on electrical equipment: presence, visibility, legibility, equipment identification, voltage and incident-energy information, PPE data, and label condition.

    • Arc flash
    • Electrical safety
    Get Checklist: Arc Flash Label Inspection Checklist