
Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Complete allergen checklist from any device, score against your standard, capture photo proof, assign corrective tasks, and keep a consistent record across every location, all in one workflow.
InspectWrk is the software we provide to run this checklist audit workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Reported by voice or chat, mislabelled or missing allergen info is caught late and logged with no evidence tied to the asset.
Cross-contact in storage goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
On a manual round shared equipment without cleaning is easy to miss, and hard to defend to an auditor after the fact.
Inadequate cleaning lands in a photo thread with no owner, deadline, or audit trail behind it.
InspectWrk runs the whole allergen inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
Open the right allergen checklist by scanning the asset or location QR tag.
Record photos, readings, and signatures, offline where signal is poor.
AI flags likely defects from the photo and the inspector confirms or overrides.
A failed item becomes an owned action with a severity and a deadline.
The finding stays open until a named approver signs off proof of the fix.
A branded report generates on close-out and dashboards update across sites.
The checklist audit workflow, end to end: Plan → Complete checklist → Score → Capture evidence → Corrective action → Verify → Report. Every step happens on one system, so nothing falls between the field and the office.
Your allergen controls become a mobile template with required photos and readings on allergen matrix and labelling, storage and segregation, dedicated equipment and utensils, cleaning between tasks, and staff training and communication, aligned to Natasha's Law and HACCP, so every site inspects to the same standard from day one.
Inspectors complete the allergen inspection on iOS or Android, offline where signal is poor, recording allergen matrix photo, segregation photo, and cleaning record against each point before a named sign-off can close the round.
A failed item such as mislabelled or missing allergen info becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so allergen defects do not resurface unnoticed.
Every allergen inspection feeds live dashboards and branded exports, so operations directors see completion, overdue actions, and risk per site without assembling a report by hand.
The capabilities that matter for this workflow, and what your team can do with each one.
For allergen checklist field teams, allergen Checklist schedules, renewal alerts, and completion tracking keep statutory and contractual cycles visible across the portfolio.
Across multi-site allergen checklist rounds, allergen Checklist capture is standardised across every site, so two inspectors record the same thing the same way on the same form.
Where allergen checklist evidence has to hold up, during allergen checklist checks, on-device models surface probable issues from images, reducing keystrokes and overlooked items.
Allergen Checklist performance rolls up live by site and region, so Operations Directors brief leadership from data rather than anecdote.
For Food & Beverage teams running allergen checklist, structured allergen checklist history and branded PDFs let Food & Beverage teams answer an auditor on the day, not after a week of reconstruction.
In Food & Beverage allergen checklist operations, iOS and Android apps cache allergen checklist templates and submissions, so basements, plant rooms, and remote sites never block capture.
An allergen inspection covers allergen matrix and labelling, storage and segregation, dedicated equipment and utensils, cleaning between tasks, and staff training and communication. Operations directors capture a photo and a reading on each allergen point. They work offline where signal is poor, then sign the allergen round off. So every allergen record proves what was checked, when, and by whom.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.


See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.


Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.


See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.

Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.

Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.

The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.

InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.

Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
A live view of allergen inspection status across every site, with defensible evidence and no Friday report assembly.
Guided allergen checks on mobile with offline capture, so mislabelled or missing allergen info is caught and logged on the spot.
Searchable allergen history and Natasha's Law-ready exports available on demand.
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Food & Beverage teams
Standardise on one workflow across every location.
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Where paper and spreadsheets fall short against InspectWrk on the allergen inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like allergen matrix and labelling are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided allergen templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as mislabelled or missing allergen info is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and Natasha's Law evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to Natasha's Law, and managers see status across every site live. |
Prove the allergen checklist workflow on one region first, checking that findings close on time and audit packs assemble cleanly before the next site group joins.
Widen allergen checklist coverage across the estate with permissions per role and templates that reflect each food & beverage site's regulatory scope.
Feed allergen checklist results into portfolio dashboards and branded exports, and push findings to your CMMS, ERP, or GRC stack through the API where food & beverage teams need it.
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.







“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group

“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.

“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Get started with inspection and audit checklist templates.

Food safety and hygiene inspections: temperature checks, cleanliness, HACCP points, and corrective actions. Audit-ready evidence.

Inspect a commercial oven end to end: heating elements or burners, temperature controls, thermostat, door and gasket, hinges, gas and electrical connections, ignition, safety controls, racks, chamber, ventilation, and cleanliness, with photo evidence and corrective actions.

Service a commercial ice machine end to end: water inlet, water filter, water distribution, evaporator, condenser and condenser coil, pump, drain, ice production, ice bin, scale, leaks, temperature, and electrical condition, with cleaning, sanitation, and maintenance records.

Inspect a commercial refrigerator end to end: temperature, thermostat and control, door and gasket, shelving, condenser, evaporator, compressor, fans, defrost system, drain, electrical condition, cleanliness, and frost or ice, with alarms and maintenance records.
Allergen Checklist Software runs a structured allergen inspection covering allergen matrix and labelling, storage and segregation, dedicated equipment and utensils, cleaning between tasks, and staff training and communication. Each point is captured on mobile with a photo and a reading, and a named inspector signs the round off before it can close. The same template runs on every site, so operations directors work to one standard rather than a version that drifts between locations. Every record proves what was checked, when, and by whom, so the evidence is ready long before an assessor asks for it.
How often allergen checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Allergen Checklist Software sets the cadence per site, reminds operations directors before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset. Food Safety Managers run allergen checklist inspections on a phone or tablet with Allergen Checklist Software, keeping one record for each allergen checklist and site.
The inspection targets the allergen failures that matter most: mislabelled or missing allergen info, cross-contact in storage, shared equipment without cleaning, and inadequate cleaning. Left unchecked, a fault such as mislabelled or missing allergen info can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so operations directors fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Allergen Checklist Software keeps allergen checks aligned to Natasha's Law and HACCP. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, operations directors export a branded evidence pack built from allergen matrix photo, segregation photo, and cleaning record, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Yes. Allergen Checklist Software is offline-first: teams complete allergen checks on iOS or Android with no signal, capturing allergen matrix photo, segregation photo, and cleaning record in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So operations directors get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
Every completed allergen inspection carries allergen matrix photo, segregation photo, and cleaning record, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, operations directors can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: