Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Quality & Compliance
Escape Slides AuditSoftware
Plan and score escape slides audit, capture evidence against every requirement, turn findings into tracked corrective actions, and produce audit-ready reports, all in one workflow.
InspectWrk is the software we provide to run this audit workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Low reservoir pressure
Reported by voice or chat, low reservoir pressure is caught late and logged with no evidence tied to the asset.
Girt bar not armed
Girt bar not armed goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Damaged pack or seal
On a manual round damaged pack or seal is easy to miss, and hard to defend to an auditor after the fact.
Failed deployment
Failed deployment lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the escape slides audit as a scored assessment that produces a defensible pack: plan, score against the rubric, evidence every finding, and drive corrective action to closure.
- 1
Plan
Schedule the escape slides audit and load the rubric the regulator, insurer, or client expects.
- 2
Score
Assess each category and score it, so the result is comparable audit to audit.
- 3
Evidence
Attach a photo and note to each finding, with inspector, timestamp, and location.
- 4
Finding
Every non-conformance becomes a corrective action with a severity and owner.
- 5
CAPA
Actions stay open until a named approver verifies the fix.
- 6
Report
A branded, scored audit pack exports in one click for the reviewer.
Workflow
How Does a Slide Audit Run from Evidence Capture to a Traceable Auditor Pack?
The audit workflow, end to end: Plan → Assess & score → Capture evidence → Record findings → Corrective action → Verify closure → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Escape Slides Audit Template
On escape slides audit programmes, your escape slides controls become a mobile template with required photos and readings on pressure gauge and cylinder, girt bar and arming, pack condition and seals, deployment test where due, and service and overhaul dates, aligned to EASA Part-145 and component maintenance manual, so every site inspects to the same standard from day one.
- 2
Capture the Escape Slides Check in the Field
Inspectors complete the escape slides audit on iOS or Android, offline where signal is poor, recording pressure gauge photo, arming status photo, and service date record against each point before a named sign-off can close the round.
- 3
Route Escape Slides Findings to Verified Closure
Across multi-site escape slides audit rounds, A failed item such as low reservoir pressure becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so escape slides defects do not resurface unnoticed.
- 4
Report Escape Slides Performance
Every escape slides audit feeds live dashboards and branded exports, so cabin and line engineering teams see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for escape slides audit
The capabilities that matter for this workflow, and what your team can do with each one.
Automatic Traceability
Every slide event ties to the serial, door position, named person, and timestamp. Why it matters: an auditor who cannot trace a reading to the exact slide and date treats the record as unreliable.
Unified Slide Record
Overhaul evidence, reservoir readings, and pack dates sit on one record per serial. Why it matters: an auditor cross-referencing separate files is slower and more likely to find a gap.
Finding to Corrective Action Links
Each audit finding links to a corrective action with owner, due date, and verified closure. Why it matters: a finding with no provable fix becomes a repeat finding at the next audit.
Scoped Pack Assembly
The evidence pack is scoped to the exact tails, slides, and dates in question. Why it matters: an over-broad or incomplete pack wastes auditor time and raises avoidable questions.
Branded Audit Export
A timestamped, branded audit pack exports per aircraft in minutes. Why it matters: an audit request answered fast signals a controlled process and shortens the audit.
Tamper-evident Record
Records are timestamped and attributed, with access changes logged. Why it matters: an auditor trusts a record they can see was not edited after the fact more than a photocopied card.
Coverage
What Does an Escape Slides Audit Cover?
An escape slides audit scores condition against EASA Part-145 and component maintenance manual, checking pressure gauge and cylinder, girt bar and arming, pack condition and seals, deployment test where due, and service and overhaul dates. Each escape slides finding is logged with a photo, a severity, and the failing point. So the escape slides audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
- Pressure gauge and cylinder
- Girt bar and arming
- Pack condition and seals
- Deployment test where due
- Service and overhaul dates
Common Defects It Surfaces
- Low reservoir pressure
- Girt bar not armed
- Damaged pack or seal
- Failed deployment
- Overdue overhaul
Evidence Captured
- Pressure gauge photo
- Arming status photo
- Service date record
Records align toEASA Part-145component maintenance manual
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Cabin and line engineering teams
A live view of escape slides audit status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided escape slides checks on mobile with offline capture, so low reservoir pressure is caught and logged on the spot.
Compliance stakeholders
Searchable escape slides history and EASA Part-145-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Aviation teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the escape slides audit job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Periodic scoring | Escape slides audits, covering points like pressure gauge and cylinder, are scored on paper, so results are hard to compare across periods or sites. | Each audit is scored against a fixed rubric, so trend and site comparison are genuinely comparable. |
| Evidence per finding | A finding such as low reservoir pressure is noted without a photo tied to the asset and time. | Every finding carries a photo, inspector identity, timestamp, and location. |
| Non-conformance to CAPA | Corrective actions live in email with no owner, deadline, or proof the fix happened. | Each non-conformance becomes a tracked action with severity, owner, and verified closure. |
| Audit trail | Historic audit records are scattered and slow to retrieve when a reviewer asks. | Twelve months of scored audits retrieve in one click with the full evidence trail. |
| Audit pack | The pack is assembled by hand the week of the review. | A branded, scored pack aligned to EASA Part-145 exports the moment the audit closes. |
Rollout
How Should Airline and MRO Teams Pilot Digital Slide Audits Before Fleet Rollout?
Pilot on One Aircraft Type
Start with a single fleet type so the slide records, traceability fields, and finding-to-action links are validated against real serial numbers before rollout to mixed types and other bases.
Access and Roles
Auditors get scoped read access to the evidence packs, Quality Assurance manages findings and actions, and CAMO keeps the full record per tail number through role-based access.
Before You Switch
What Auditors and QHSE Teams Ask
Can it produce a scored, defensible escape slides audit pack?
Yes. Each audit scores against the rubric, every finding carries photo evidence and a timestamp, and a branded pack exports in one click with the full trail a reviewer expects.
How are non-conformances tracked to closure?
Each becomes a corrective action with a severity, an owner, and a deadline, and stays open until a named approver verifies the fix with proof.
Can we compare audit results over time and across sites?
Because each audit scores against the same rubric with enforced definitions, trend and cross-site comparison are genuinely comparable rather than subjective.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Escape Slides Audit Off Paper?
Inspections Across Industries
View All
Which Escape Slide Audit Templates Should You Start With?
Get started with inspection and audit checklist templates.
Template
Light Vehicle Safety Inspection
Use this template to perform a comprehensive safety inspection of light vehicles. This check ensures all critical components are checked ...
500+GET
Frequently Asked Questions About Escape Slides Audit Software
What does Escape Slides Audit Software check on an escape slides audit?
Escape Slides Audit Software runs a scored escape slides audit against EASA Part-145 and component maintenance manual, checking pressure gauge and cylinder, girt bar and arming, pack condition and seals, deployment test where due, and service and overhaul dates. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for cabin and line engineering teams rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
How often should an escape slides audit be done?
How often escape slides checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Escape Slides Audit Software sets the cadence per site, reminds cabin and line engineering teams before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset.
Which escape slides defects matter most, and what happens if they are missed?
The audit targets the escape slides failures that matter most: low reservoir pressure, girt bar not armed, damaged pack or seal, and failed deployment. Left unchecked, a fault such as low reservoir pressure can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so cabin and line engineering teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Escape Slides Audit Software support for escape slides work?
Escape Slides Audit Software keeps escape slides checks aligned to EASA Part-145 and component maintenance manual. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, cabin and line engineering teams export a branded evidence pack built from pressure gauge photo, arming status photo, and service date record, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run escape slides checks offline and across multiple sites?
Yes. Escape Slides Audit Software is offline-first: teams complete escape slides checks on iOS or Android with no signal, capturing pressure gauge photo, arming status photo, and service date record in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So cabin and line engineering teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves an escape slides audit was completed?
Every completed escape slides audit carries pressure gauge photo, arming status photo, and service date record, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, cabin and line engineering teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: