Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Quality & Compliance
Escape Slides ComplianceSoftware
Plan and score escape slides compliance, capture evidence against every requirement, turn findings into tracked corrective actions, and produce audit-ready reports, all in one workflow.
InspectWrk is the software we provide to run this audit workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Low reservoir pressure
Reported by voice or chat, low reservoir pressure is caught late and logged with no evidence tied to the asset.
Girt bar not armed
Girt bar not armed goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Damaged pack or seal
On a manual round damaged pack or seal is easy to miss, and hard to defend to an auditor after the fact.
Failed deployment
Failed deployment lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk proves escape slides compliance to the standard: map the requirements, check them, evidence each one, close gaps, and keep a defensible, always-ready record.
- 1
Map requirements
Turn the escape slides requirements into a structured checklist tied to the standard.
- 2
Check
Complete each requirement on mobile with evidence attached at the point of work.
- 3
Evidence
Every record carries inspector identity, timestamp, and required photos.
- 4
Gap
A missed requirement becomes an owned action with a deadline.
- 5
Remediate
Actions stay open until verified, so gaps do not persist between audits.
- 6
Certify
Evidence packs export per site in the format the authority accepts.
Workflow
How Does Slide Compliance Run from Statutory Clock to Regulatory Evidence Pack?
The audit workflow, end to end: Plan → Assess & score → Capture evidence → Record findings → Corrective action → Verify closure → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Escape Slides Compliance Check Template
Across multi-site escape slides compliance rounds, your escape slides controls become a mobile template with required photos and readings on pressure gauge and cylinder, girt bar and arming, pack condition and seals, deployment test where due, and service and overhaul dates, aligned to EASA Part-145 and component maintenance manual, so every site inspects to the same standard from day one.
- 2
Capture the Escape Slides Check in the Field
Inspectors complete the escape slides compliance check on iOS or Android, offline where signal is poor, recording pressure gauge photo, arming status photo, and service date record against each point before a named sign-off can close the round.
- 3
Route Escape Slides Findings to Verified Closure
On every escape slides compliance cycle, A failed item such as low reservoir pressure becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so escape slides defects do not resurface unnoticed.
- 4
Report Escape Slides Performance
Every escape slides compliance check feeds live dashboards and branded exports, so cabin and line engineering teams see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for escape slides compliance
The capabilities that matter for this workflow, and what your team can do with each one.
Statutory Clock Tracking
Overhaul, pack, and reservoir due dates are tracked per slide serial against the regulatory interval. Why it matters: a slide that drifts past its statutory due date puts the aircraft out of compliance and at risk of grounding.
Prior Overhaul Evidence Linkage
The last approved MRO overhaul evidence is attached to the slide record that the clock resets. Why it matters: a clock with no proof of the prior event is hard to defend when the regulator asks for the chain.
Named Sign-off Traceability
Every reading and task carries the named person, timestamp, and serial number. Why it matters: traceability is the first thing an auditor checks, and a photocopied card rarely shows it cleanly.
Reservoir Pressure Compliance Status
Green-band pressure readings roll into a live compliance status per slide serial. Why it matters: a reservoir drifting low is a compliance gap that a loose card cannot surface in time.
Fleet Compliance Dashboard
Overhaul, pack, and reservoir status roll up across tail numbers and door positions. Why it matters: the Quality Assurance manager shows fleet compliance without reconciling base spreadsheets.
Per-tail Evidence Export
A branded compliance pack exports per aircraft for the regulator. Why it matters: a regulator request becomes a minutes-long export, not a file-room search under time pressure.
Coverage
What Does an Escape Slides Compliance Check Cover?
Escape slides compliance evidences the required checks on pressure gauge and cylinder, girt bar and arming, pack condition and seals, deployment test where due, and service and overhaul dates. The photos and readings each escape slides rule expects are mandatory fields. Escape slides renewals are flagged before they lapse. So escape slides compliance stays a documented fact, not an assurance.
What Gets Checked
- Pressure gauge and cylinder
- Girt bar and arming
- Pack condition and seals
- Deployment test where due
- Service and overhaul dates
Common Defects It Surfaces
- Low reservoir pressure
- Girt bar not armed
- Damaged pack or seal
- Failed deployment
- Overdue overhaul
Evidence Captured
- Pressure gauge photo
- Arming status photo
- Service date record
Records align toEASA Part-145component maintenance manual
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Cabin and line engineering teams
A live view of escape slides compliance check status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided escape slides checks on mobile with offline capture, so low reservoir pressure is caught and logged on the spot.
Compliance stakeholders
Searchable escape slides history and EASA Part-145-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Aviation teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the escape slides compliance job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Requirement coverage | Escape slides requirements such as pressure gauge and cylinder are tracked in a spreadsheet, so it is unclear what is covered and what is overdue. | Each requirement is a structured check tied to the standard, with a clear covered / due / overdue status. |
| Evidence chain | Proof of a check such as low reservoir pressure sits across drives and email with no chain of custody. | Every record carries inspector, timestamp, asset, and required photos as an audit-grade chain. |
| Documentation | Documents live in filing cabinets and personal inboxes. | Records are searchable and retrievable per site, per asset, and per requirement. |
| Standard traceability | Mapping a record back to the specific EASA Part-145 clause is manual and error-prone. | Each check maps to its requirement aligned to EASA Part-145, so traceability is built in. |
| Renewal and defensibility | Renewals lapse silently and the pack is assembled under pressure. | Statutory clocks alert before each renewal, and the compliance pack is always ready. |
Rollout
How Should Airline and MRO Teams Pilot Digital Slide Compliance Before Fleet Rollout?
Pilot on One Aircraft Type
Start with a single fleet type so the statutory clocks, prior overhaul evidence, and reservoir records are validated against real serial numbers before rollout to mixed types and other bases.
Access and Roles
CAMO engineers maintain the clocks, Quality Assurance gets read access to the full compliance status, and cabin safety gets a fleet view per tail number through role-based access.
Before You Switch
What Compliance Teams Ask
Can it prove escape slides compliance to an auditor?
Yes. Every record carries inspector identity, a timestamp, asset confirmation, and required photos, and evidence packs export per site in the format the authority accepts.
How do we stop renewals lapsing?
Statutory clocks track each renewal date and alert 30, 60, and 90 days ahead, so nothing lapses quietly and the pack is ready before it is requested.
Can we trace a record back to the requirement it satisfies?
Each check maps to its requirement, so traceability to the standard is built into the record rather than reconstructed by hand.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Escape Slides Compliance Off Paper?
Inspections Across Industries
View All
Which Escape Slide Compliance Templates Should You Start With?
Get started with inspection and audit checklist templates.
Template
Light Vehicle Safety Inspection
Use this template to perform a comprehensive safety inspection of light vehicles. This check ensures all critical components are checked ...
500+GET
Frequently Asked Questions About Escape Slides Compliance Software
What does Escape Slides Compliance Software check on an escape slides compliance check?
Escape Slides Compliance Software keeps escape slides compliance current by evidencing pressure gauge and cylinder, girt bar and arming, pack condition and seals, deployment test where due, and service and overhaul dates. The photos and readings each rule expects are mandatory fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. Renewals and statutory due dates are flagged before they lapse. When an assessor asks, cabin and line engineering teams export a branded, audit-ready pack and full history for the site in scope in seconds, not after days of digging through folders.
How often should an escape slides compliance check be done?
How often escape slides checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Escape Slides Compliance Software sets the cadence per site, reminds cabin and line engineering teams before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset.
Which escape slides defects matter most, and what happens if they are missed?
The compliance check targets the escape slides failures that matter most: low reservoir pressure, girt bar not armed, damaged pack or seal, and failed deployment. Left unchecked, a fault such as low reservoir pressure can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so cabin and line engineering teams fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Escape Slides Compliance Software support for escape slides work?
Escape Slides Compliance Software keeps escape slides checks aligned to EASA Part-145 and component maintenance manual. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, cabin and line engineering teams export a branded evidence pack built from pressure gauge photo, arming status photo, and service date record, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run escape slides checks offline and across multiple sites?
Yes. Escape Slides Compliance Software is offline-first: teams complete escape slides checks on iOS or Android with no signal, capturing pressure gauge photo, arming status photo, and service date record in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So cabin and line engineering teams get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves an escape slides compliance check was completed?
Every completed escape slides compliance check carries pressure gauge photo, arming status photo, and service date record, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, cabin and line engineering teams can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: