Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Food Safety
HACCP InspectionSoftware
Run HACCP inspection in the field, capture photo evidence, log defects, assign corrective actions, and keep a complete, provable inspection history, all in one workflow.
InspectWrk is the software we provide to run this inspection workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
CCP temperature breach
Reported by voice or chat, CCP temperature breach is caught late and logged with no evidence tied to the asset.
Allergen cross-contact
Allergen cross-contact goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Dirty food-contact surfaces
On a manual round dirty food-contact surfaces is easy to miss, and hard to defend to an auditor after the fact.
Open cold-store doors
Open cold-store doors lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the whole HACCP inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
- 1
Inspect
Open the right HACCP checklist by scanning the asset or location QR tag.
- 2
Capture
Record photos, readings, and signatures, offline where signal is poor.
- 3
Find
AI flags likely defects from the photo and the inspector confirms or overrides.
- 4
Correct
A failed item becomes an owned action with a severity and a deadline.
- 5
Verify
The finding stays open until a named approver signs off proof of the fix.
- 6
Report
A branded report generates on close-out and dashboards update across sites.
Workflow
How Does a HACCP Inspection Cycle Run from Field Capture to Audit-Ready Reporting?
The inspection workflow, end to end: Plan → Inspect → Capture evidence → Record findings → Correct → Re-inspect → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the HACCP Inspection Template
Your HACCP controls become a mobile template with required photos and readings on CCP temperature checks, allergen segregation, surface and utensil hygiene, cold-store and freezer condition, and pest and waste controls, aligned to HACCP, FSSAI, and ISO 22000, so every site inspects to the same standard from day one.
- 2
Capture the HACCP Check in the Field
Inspectors complete the HACCP inspection on iOS or Android, offline where signal is poor, recording temperature log, zone photo, and cleaning record against each point before a named sign-off can close the round.
- 3
Route HACCP Findings to Verified Closure
A failed item such as ccp temperature breach becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so HACCP defects do not resurface unnoticed.
- 4
Report HACCP Performance
Every HACCP inspection feeds live dashboards and branded exports, so operations directors see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for HACCP inspection
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
On HACCP inspection programmes, HACCP Inspection cadence is enforced per asset: the next check is booked the moment the last one closes, so nothing silently slips off the plan.
Structured Field Capture
For HACCP inspection field teams, required-field HACCP inspection capture means no skipped questions and no missing evidence, even when the round is rushed.
AI-assisted Evidence Capture
Across multi-site HACCP inspection rounds, on-device AI flags likely defects in HACCP inspection photos and pre-fills findings, so inspectors type less and miss less in the field.
Portfolio Dashboards
Operations Directors track HACCP inspection risk hotspots and SLA breaches as they happen, instead of waiting for a manual Friday summary.
Audit-ready Exports
On every HACCP inspection cycle, every HACCP inspection review gets a branded export and a searchable trail, so proof of what was checked is one click away.
Offline-first Mobile Apps
For Food & Beverage teams running HACCP inspection, weak-signal sites stop being an excuse for missing HACCP inspection evidence, because capture and sync are decoupled on mobile.
Coverage
What Does a HACCP Inspection Cover?
A HACCP inspection covers CCP temperature checks, allergen segregation, surface and utensil hygiene, cold-store and freezer condition, and pest and waste controls. Operations directors capture a photo and a reading on each HACCP point. They work offline where signal is poor, then sign the HACCP round off. So every HACCP record proves what was checked, when, and by whom.
What Gets Checked
- CCP temperature checks
- Allergen segregation
- Surface and utensil hygiene
- Cold-store and freezer condition
- Pest and waste controls
Common Defects It Surfaces
- CCP temperature breach
- Allergen cross-contact
- Dirty food-contact surfaces
- Open cold-store doors
Evidence Captured
- Temperature log
- Zone photo
- Cleaning record
Records align toHACCPFSSAIISO 22000
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Operations Directors
A live view of HACCP inspection status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided HACCP checks on mobile with offline capture, so ccp temperature breach is caught and logged on the spot.
Compliance stakeholders
Searchable HACCP history and HACCP-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Food & Beverage teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the HACCP inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like CCP temperature checks are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided HACCP templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as CCP temperature breach is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and HACCP evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to HACCP, and managers see status across every site live. |
Rollout
How Should Food & Beverage Teams Pilot HACCP Inspection Digitally Without Disrupting Operations?
Pilot on one site cluster
Start narrow with a pilot HACCP inspection programme on a few sites, so Operations Directors can validate evidence quality and correction speed against the old paper baseline.
Scale templates and roles
Extend HACCP inspection access to contractors and in-house crews with role-based permissions, and map each template to your food & beverage standards and statutory duties.
Connect reporting and integrations
Turn on live HACCP inspection reporting for Operations Directors, and route readings and defects into the CMMS or compliance system of record so nothing is re-keyed.
Before You Switch
Common Questions Before You Start
We already run HACCP checks on paper. Do we have to change our process?
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
Will field teams actually use it?
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
What happens when a defect is found?
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move HACCP Inspection Off Paper?
Inspections Across Industries
View All
Which HACCP Inspection Checklist Templates Should You Try First?
Get started with inspection and audit checklist templates.
Safety & Compliance
Food Safety Inspection Checklist
Food safety and hygiene inspections: temperature checks, cleanliness, HACCP points, and corrective actions. Audit-ready evidence.
33,500+GET
Kitchen Equipment
Commercial Oven Inspection Checklist
Inspect a commercial oven end to end: heating elements or burners, temperature controls, thermostat, door and gasket, hinges, gas and electrical connections, ignition, safety controls, racks, chamber, ventilation, and cleanliness, with photo evidence and corrective actions.
9,100+GET
Kitchen Equipment
Ice Machine Preventive Maintenance Checklist
Service a commercial ice machine end to end: water inlet, water filter, water distribution, evaporator, condenser and condenser coil, pump, drain, ice production, ice bin, scale, leaks, temperature, and electrical condition, with cleaning, sanitation, and maintenance records.
8,400+GET
Kitchen Equipment
Commercial Refrigerator Inspection Checklist
Inspect a commercial refrigerator end to end: temperature, thermostat and control, door and gasket, shelving, condenser, evaporator, compressor, fans, defrost system, drain, electrical condition, cleanliness, and frost or ice, with alarms and maintenance records.
10,200+GET
Which HACCP Inspection Apps Run on iOS and Android?
Use these apps to run inspections and audits.
Frequently Asked Questions About HACCP Inspection Software
What does HACCP Inspection Software check on a HACCP inspection?
HACCP Inspection Software runs a structured HACCP inspection covering CCP temperature checks, allergen segregation, surface and utensil hygiene, cold-store and freezer condition, and pest and waste controls. Each point is captured on mobile with a photo and a reading, and a named inspector signs the round off before it can close. The same template runs on every site, so operations directors work to one standard rather than a version that drifts between locations. Every record proves what was checked, when, and by whom, so the evidence is ready long before an assessor asks for it.
How often should a HACCP inspection be done?
How often HACCP checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. HACCP Inspection Software sets the cadence per site, reminds operations directors before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset. HACCP Inspection Software is the mobile tool Food Safety Managers use to run HACCP inspections across every food & beverage site from one app.
Which HACCP defects matter most, and what happens if they are missed?
The inspection targets the HACCP failures that matter most: CCP temperature breach, allergen cross-contact, dirty food-contact surfaces, and open cold-store doors. Left unchecked, a fault such as ccp temperature breach can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so operations directors fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does HACCP Inspection Software support for HACCP work?
HACCP Inspection Software keeps HACCP checks aligned to HACCP, FSSAI, and ISO 22000. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, operations directors export a branded evidence pack built from temperature log, zone photo, and cleaning record, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run HACCP checks offline and across multiple sites?
Yes. HACCP Inspection Software is offline-first: teams complete HACCP checks on iOS or Android with no signal, capturing temperature log, zone photo, and cleaning record in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So operations directors get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a HACCP inspection was completed?
Every completed HACCP inspection carries temperature log, zone photo, and cleaning record, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, operations directors can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: