Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Safety & Compliance
Risk Assessment AuditSoftware
Plan and score risk assessment audit, capture evidence against every requirement, turn findings into tracked corrective actions, and produce audit-ready reports, all in one workflow.
InspectWrk is the software we provide to run this audit workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Hazard missed
Reported by voice or chat, hazard missed is caught late and logged with no evidence tied to the asset.
Controls not implemented
Controls not implemented goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Assessment out of date
On a manual round assessment out of date is easy to miss, and hard to defend to an auditor after the fact.
Generic assessment not site-specific
Generic assessment not site-specific lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the risk assessment audit as a scored assessment that produces a defensible pack: plan, score against the rubric, evidence every finding, and drive corrective action to closure.
- 1
Plan
Schedule the risk assessment audit and load the rubric the regulator, insurer, or client expects.
- 2
Score
Assess each category and score it, so the result is comparable audit to audit.
- 3
Evidence
Attach a photo and note to each finding, with inspector, timestamp, and location.
- 4
Finding
Every non-conformance becomes a corrective action with a severity and owner.
- 5
CAPA
Actions stay open until a named approver verifies the fix.
- 6
Report
A branded, scored audit pack exports in one click for the reviewer.
Workflow
How Does a Risk Assessment Audit Programme Run from Field Capture to Leadership Reporting?
The audit workflow, end to end: Plan → Assess & score → Capture evidence → Record findings → Corrective action → Verify closure → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Risk Assessment Audit Template
In HSE & Safety risk assessment audit operations, your risk assessment controls become a mobile template with required photos and readings on hazards identified, who is at risk, existing controls, additional controls needed, and review date and sign-off, aligned to ISO 45001 and local HSE rules, so every site inspects to the same standard from day one.
- 2
Capture the Risk Assessment Check in the Field
Across the risk assessment audit portfolio, inspectors complete the risk assessment audit on iOS or Android, offline where signal is poor, recording assessment record, site control photo, and review sign-off against each point before a named sign-off can close the round.
- 3
Route Risk Assessment Findings to Verified Closure
On risk assessment audit programmes, A failed item such as hazard missed becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so risk assessment defects do not resurface unnoticed.
- 4
Report Risk Assessment Performance
For risk assessment audit field teams, every risk assessment audit feeds live dashboards and branded exports, so operations directors see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for risk assessment audit
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
On every risk assessment audit cycle, every risk assessment audit due date, renewal, and re-inspection sits on one calendar, so a lapsed certificate is caught before it expires, not after.
Structured Field Capture
For HSE & Safety teams running risk assessment audit, field teams run risk assessment audit checks on a guided template that captures evidence inline, replacing loose paper and chat threads.
AI-assisted Evidence Capture
Image recognition pre-tags risk assessment audit findings, so an HSE & Safety inspector spends time judging risk rather than writing it up.
Portfolio Dashboards
Across the risk assessment audit portfolio, operations Directors track risk assessment audit risk hotspots and SLA breaches as they happen, instead of waiting for a manual Friday summary.
Audit-ready Exports
On risk assessment audit programmes, risk Assessment Audit evidence exports as a regulator-ready pack with photos and sign-offs intact, filtered to the site under review.
Offline-first Mobile Apps
For risk assessment audit field teams, weak-signal sites stop being an excuse for missing risk assessment audit evidence, because capture and sync are decoupled on mobile.
Coverage
What Does a Risk Assessment Audit Cover?
A risk assessment audit scores condition against ISO 45001 and local HSE rules, checking hazards identified, who is at risk, existing controls, additional controls needed, and review date and sign-off. Each risk assessment finding is logged with a photo, a severity, and the failing point. So the risk assessment audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
- Hazards identified
- Who is at risk
- Existing controls
- Additional controls needed
- Review date and sign-off
Common Defects It Surfaces
- Hazard missed
- Controls not implemented
- Assessment out of date
- Generic assessment not site-specific
- No review after a change
Evidence Captured
- Assessment record
- Site control photo
- Review sign-off
Records align toISO 45001local HSE rules
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Operations Directors
A live view of risk assessment audit status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided risk assessment checks on mobile with offline capture, so hazard missed is caught and logged on the spot.
Compliance stakeholders
Searchable risk assessment history and ISO 45001-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
HSE & Safety teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the risk assessment audit job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Periodic scoring | Risk assessment audits, covering points like hazards identified, are scored on paper, so results are hard to compare across periods or sites. | Each audit is scored against a fixed rubric, so trend and site comparison are genuinely comparable. |
| Evidence per finding | A finding such as hazard missed is noted without a photo tied to the asset and time. | Every finding carries a photo, inspector identity, timestamp, and location. |
| Non-conformance to CAPA | Corrective actions live in email with no owner, deadline, or proof the fix happened. | Each non-conformance becomes a tracked action with severity, owner, and verified closure. |
| Audit trail | Historic audit records are scattered and slow to retrieve when a reviewer asks. | Twelve months of scored audits retrieve in one click with the full evidence trail. |
| Audit pack | The pack is assembled by hand the week of the review. | A branded, scored pack aligned to ISO 45001 exports the moment the audit closes. |
Rollout
How Should Teams Pilot Digital Risk Assessment Audit Workflows Before Portfolio Rollout?
Pilot on one site cluster
Prove the risk assessment audit workflow on one region first, checking that findings close on time and audit packs assemble cleanly before the next site group joins.
Scale templates and roles
Widen risk assessment audit coverage across the estate with permissions per role and templates that reflect each HSE & safety site's regulatory scope.
Connect reporting and integrations
Wire risk assessment audit data into leadership dashboards and share-ready PDFs, then connect the API to the asset register or maintenance system your HSE & safety operation already runs.
Before You Switch
What Auditors and QHSE Teams Ask
Can it produce a scored, defensible risk assessment audit pack?
Yes. Each audit scores against the rubric, every finding carries photo evidence and a timestamp, and a branded pack exports in one click with the full trail a reviewer expects.
How are non-conformances tracked to closure?
Each becomes a corrective action with a severity, an owner, and a deadline, and stays open until a named approver verifies the fix with proof.
Can we compare audit results over time and across sites?
Because each audit scores against the same rubric with enforced definitions, trend and cross-site comparison are genuinely comparable rather than subjective.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Risk Assessment Audit Off Paper?
Inspections Across Industries
View All
Which Risk Assessment Audit Templates Should You Start With?
Get started with inspection and audit checklist templates.
Safety
Safety Inspection Checklist
Safety inspections with hazard identification, corrective actions, and compliance reporting. Offline capture and evidence.
52,100+GET
Incident Reporting
Incident Report Form
Report incidents and near-misses with details, photos, location, and timeline. Ready for safety or quality review.
26,700+GET
Electrical Safety
Arc Flash Label Inspection Checklist
Verify arc-flash labels on electrical equipment: presence, visibility, legibility, equipment identification, voltage and incident-energy information, PPE data, and label condition.
9,100+GET
Electrical Safety
Grounding & Bonding Inspection Checklist
Inspect grounding and bonding systems: grounding conductors and electrodes, bonding connections, equipment grounding, continuity, corrosion, and panel connections.
10,200+GET
Frequently Asked Questions About Risk Assessment Audit Software
What does Risk Assessment Audit Software check on a risk assessment audit?
Risk Assessment Audit Software runs a scored risk assessment audit against ISO 45001 and local HSE rules, checking hazards identified, who is at risk, existing controls, additional controls needed, and review date and sign-off. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for operations directors rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
How often should a risk assessment audit be done?
How often risk assessment checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Risk Assessment Audit Software sets the cadence per site, reminds operations directors before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset.
Which risk assessment defects matter most, and what happens if they are missed?
The audit targets the risk assessment failures that matter most: hazard missed, controls not implemented, assessment out of date, and generic assessment not site-specific. Left unchecked, a fault such as hazard missed can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so operations directors fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Risk Assessment Audit Software support for risk assessment work?
Risk Assessment Audit Software keeps risk assessment checks aligned to ISO 45001 and local HSE rules. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, operations directors export a branded evidence pack built from assessment record, site control photo, and review sign-off, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run risk assessment checks offline and across multiple sites?
Yes. Risk Assessment Audit Software is offline-first: teams complete risk assessment checks on iOS or Android with no signal, capturing assessment record, site control photo, and review sign-off in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So operations directors get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a risk assessment audit was completed?
Every completed risk assessment audit carries assessment record, site control photo, and review sign-off, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, operations directors can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: