InspectWrk

Lab Safety Equipment Inspection Checklist

Use this lab safety equipment inspection checklist to inspect chemical storage and labelling, fume hood function, PPE and eyewash and sample chain of custody on education sites so teams can verify laboratory safety, sample integrity, and quality controls remain in force, capturing photo evidence per finding and tracking each fix through to closure. Watch for incompatible storage, failed hood face velocity and unsigned chain-of-custody. Records support fire safety regulations, PAT testing standards and the Health and Safety at Work Act.

6 sections22 questions16 to 30 minutesFree

Lab Safety Equipment InspectionBlock A · Identification & Condition0 of 3 checked
  • Record the lab safety equipment identifier, make, model, and location.Three children at a lab table with colored liquids in flasks, two wearing goggles, writing notesPhoto Added
  • Confirm the lab safety equipment is on the asset register and its inspection or service is current.Three children at a lab table with colored liquids in flasks, two wearing goggles, writing notesPhoto Added
  • Inspect the lab safety equipment for visible damage, wear, and missing or illegible labels.Three children at a lab table with colored liquids in flasks, two wearing goggles, writing notesPhoto Added
Free on iOS and AndroidGet the App

What’s in this checklist.

6 sections · 22 questions · 16 to 30 minutes · Free

    1. Record the lab safety equipment identifier, make, model, and location.

    2. Confirm the lab safety equipment is on the asset register and its inspection or service is current.

    3. Inspect the lab safety equipment for visible damage, wear, and missing or illegible labels.

    1. Confirm the lab safety equipment is identified, on the asset register, and rated for the task.

    2. Inspect the lab safety equipment for visible damage, wear, corrosion, and missing or illegible labels.

    3. Check guards, interlocks, emergency stops, and warning devices function correctly.

    4. Verify electrical leads, connections, hoses, and fittings are sound and secure.

    5. Test operation through its range and confirm controls respond as expected.

    6. Check lubrication, fluid levels, and consumables are within specification.

    7. Confirm the lab safety equipment inspection or service is current and any defect is tagged out.

    1. Check for damaged or missing guards.

    2. Check for worn, cracked, or corroded components.

    3. Check for faulty controls or emergency stops.

    4. Check for expired inspection or service.

    1. Capture asset label or tag photo.

    2. Capture condition photo of the defect.

    3. Capture test reading record.

    1. Confirm the inspection meets the requirements of OSHA 1910 and ISO 45001.

    2. Confirm records are retained for the required period and available for audit.

    1. Attach photo evidence for every non-compliant finding.

    2. Assign each deficiency to an owner with a corrective action and due date.

    3. Confirm re-inspection requirements are recorded before sign-off.

How the Lab Safety Equipment Inspection checklist works.

Three steps, about 16 to 30 minutes.

  1. Work through each section

    Section by section, one check at a time.

  2. Log every finding

    Tap Fail, add a photo, assign who fixes it.

  3. Sign off and share

    The report is ready the moment you finish.

Same checklist, two ways to run it.

Paper for a one-off check. The app when every finding needs fixing.

Printed PDF

  • Pen on paper
  • Photos in your camera roll
  • Report typed up later

InspectWrk appRecommended

  • Photos on every finding
  • Owner and due date per finding
  • Report ready at sign-off
Get the App

Branded checklist

Get Your Company Branded Checklist

Customize with your logo and company details.

We respect your privacy. No spam, ever.

What is a lab safety equipment inspection checklist?

Quick answer

A lab safety equipment inspection checklist is the structured inspection used to verify laboratory safety, sample integrity, and quality controls remain in force that education teams use to check the key inspection points, assign owners to any failures, and close them with photo proof. Completed in InspectWrk, it is timestamped, works offline, and exports as an audit-ready education report for fire safety regulations, PAT testing standards and the Health and Safety at Work Act.

A lab safety equipment inspection checklist is the structured inspection used to verify laboratory safety, sample integrity, and quality controls remain in force that education teams use to check chemical storage and labelling, fume hood function, PPE and eyewash and sample chain of custody, capture photo evidence, and track corrective actions to closure. Its job is to verify laboratory safety, sample integrity, and quality controls remain in force. Use this Lab Safety Equipment Inspection Checklist to inspect lab safety eyewash, fire blanket, PPE, and shower during lab safety kit check, document defects with photos, assign corrective actions, and verify closure.

Why are lab safety equipment inspections still chased on WhatsApp?

Lab managers and safety officers still miss incompatible storage, failed hood face velocity and unsigned chain-of-custody when rounds are ticked without hood check record, calibration sticker and storage photo.

Without a single inspection record, teams reconstruct the evidence from phones instead of proving fire safety regulations, PAT testing standards and the Health and Safety at Work Act readiness.

Before and After InspectWrk

Before InspectWrk

  • education inspections for lab safety equipment happen on paper or in WhatsApp threads, with no timestamp and no photo evidence.
  • Lab equipment checks are ticked on paper without photo evidence per finding.
  • You find out about a lab safety equipment issue from a client complaint or an auditor, not from your own team in real time.

After InspectWrk

  • Facilities managers complete the inspection in the app with photo evidence at the lab safety equipment, even offline.
  • Managers see open findings, closure status, and fire safety regulations, PAT testing standards and the Health and Safety at Work Act evidence live on one dashboard.
  • Overdue corrective actions escalate automatically so the fix happens before the next education audit.

Why is a lab safety equipment inspection checklist important?

It helps facilities managers and supervisors keep education work consistent, safe, and auditable, with the evidence needed for fire safety regulations, PAT testing standards and the Health and Safety at Work Act:

  • Cover the full inspection: structured checks across chemical storage and labelling, fume hood function, PPE and eyewash and sample chain of custody surface incompatible storage, failed hood face velocity and unsigned chain-of-custody before they reach handover, audit, or the next shift.
  • Document education findings with the right proof: capture hood check record, calibration sticker and storage photo on every issue so nothing rests on memory.
  • Track education fixes to closure: each failure becomes an action with an owner, a due date, and a re-inspection that confirms it is done.
  • Stay audit-ready: keep one timestamped record for fire safety regulations, PAT testing standards and the Health and Safety at Work Act you can export instead of rebuilding it from scattered photos and spreadsheets.

What should be included in a lab safety equipment inspection checklist?

A complete lab safety equipment inspection checklist works through chemical storage and labelling, fume hood function, PPE and eyewash and sample chain of custody, then records inspection context, scored checkpoints, and evidence with corrective actions:

Inspection context

Record where and when the inspection runs:

  • Site, education location, and asset identification
  • Inspector, date, and the education areas or assets in scope
  • Reference numbers or schedules linked to the checklist

Checkpoints and scoring

Define what each checkpoint verifies and how results are scored:

  • chemical storage and labelling
  • fume hood function
  • PPE and eyewash
  • sample chain of custody
  • calibration of critical instruments
  • Failure watchouts: incompatible storage, failed hood face velocity and unsigned chain-of-custody
  • Evidence: hood check record, calibration sticker and storage photo
  • 20 fields aligned to the checklist

Evidence and corrective actions

Make every finding traceable and actionable:

  • Capture hood check record, calibration sticker and storage photo on failed or critical items
  • Corrective actions with owners and due dates for education teams
  • Sign-off, completion status, and follow-up notes

How do teams use a lab safety equipment inspection checklist?

Follow these steps to run the lab safety equipment inspection checklist:

  1. Fill in the lab safety equipment header: inspector, site, date, and areas in scope.
  2. Work through chemical storage and labelling, fume hood function, PPE and eyewash and sample chain of custody in order, recording pass, fail, or N/A.
  3. Attach hood check record, calibration sticker and storage photo wherever a failure or observation needs proof.
  4. Raise actions for incompatible storage, failed hood face velocity and unsigned chain-of-custody with owners and deadlines before sign-off.
  5. Review the lab safety equipment summary, share the report, and keep the record for your audit trail.

See how this checklist fits into Inspection software for education institutions.

This checklist runs as a mobile inspection app that works fully offline on site, with AI-powered defect detection on every photo. To see it on your own workflows, talk to our team.

AI-Powered Features for Your Field Workflows

Submit an inspection and AI writes the PDF report and Excel sheet for you. No admin, no waiting.

01 / 05Photo to formVISION AI

Take a Photo. AI Fills the Form.

Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically.

No typing. No manual entry.

02 / 05Voice to textVOICE AI

Speak. AI Writes It Down.

Inspectors speak their observations in any language. AI transcribes and fills the form in real time.

Completely hands-free in the field.

03 / 05Auto reportsREPORT AI

AI Writes the Report. PDF and Excel, Instantly.

The moment an inspection is submitted, AI summarises the findings and builds a branded PDF report and an Excel sheet for you.

No manual reporting. No copy-paste.

04 / 05IntegrationsINTEGRATIONS

Connect Your Existing Tools.

InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP.

No double entry.

05 / 05Live dashboardLIVE DATA

Live Dashboard. Every Site. Always On.

Your operations team sees completion rates, open issues, and compliance scores across all sites in real time.

No chasing updates.

One Platform. Mobile-First. AI-Powered.

  • Collaborate

    Collaborate with your team anytime, anywhere

    See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.

    • Organise inspection data by site, team, and date
    • Assign checks to the inspector or vendor responsible
    • Track completion across every location in one view
    • Keep field and back-office in sync in real time
    • Comment on findings without leaving the inspection
  • Custom Reports

    Custom reports that guide your decision making

    Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.

    • Branded PDF and CSV export from any completed inspection
    • Schedule weekly or monthly delivery to managers and clients
    • Share to email, Drive, Teams, or Slack in one click
    • Filter findings by site, severity, or corrective-action status
  • Powerful Analytics

    Analyse your inspection data with confidence

    See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.

    Powerful dashboard
    Combine multiple reports into one dashboard so you can monitor status, bottlenecks, and completion trends at a glance.
    Always in sync
    Changes sync across devices so inspectors, supervisors, and back-office teams always see the latest responses and attachments.
    Embedded analytics
    Explore checklist data with charts and breakdowns that stay tied to the underlying inspections, without exporting to spreadsheets.

Lab Safety Equipment Inspectionquestions

See this checklist running on your own sites in a 30-minute demo.

Book a Free Demo

It is scoped to the scheduled cadence and controls that facilities managers, bursars, health and safety officers, site teams run, not a one-off handover walk. It prompts chemical storage and labelling, fume hood function, PPE and eyewash and sample chain of custody, watching for incompatible storage, failed hood face velocity and unsigned chain-of-custody, records pass, fail, or N/A with hood check record, calibration sticker and storage photo on critical items, and raises corrective actions with owners before sign-off. Run in InspectWrk, the record is timestamped and rolls into trend reports so repeat failures surface before the next audit.

They work through each checkpoint to verify laboratory safety, sample integrity, and quality controls remain in force, confirm the required controls are in place, and capture hood check record, calibration sticker and storage photo on anything that fails or needs proof. Priority failure modes include incompatible storage, failed hood face velocity and unsigned chain-of-custody. Each checkpoint takes pass, fail, or N/A, and a failed item stays open until the fix is verified.

It expects hood check record, calibration sticker and storage photo on failed or critical items, so findings rest on proof rather than memory. Records support fire safety regulations, PAT testing standards and the Health and Safety at Work Act, and every photo, note, and sign-off stays attached to the inspection instead of living in chat threads.

It checks chemical storage and labelling, fume hood function, PPE and eyewash and sample chain of custody across education sites. The round exists to verify laboratory safety, sample integrity, and quality controls remain in force. It prioritises failure modes such as incompatible storage, failed hood face velocity and unsigned chain-of-custody. Facilities managers record pass, fail, or N/A on each item, capture photo evidence on anything that needs proof, and assign corrective actions with owners and due dates. Evidence expectations include hood check record, calibration sticker and storage photo. A failed item stays open until the fix is verified, and it runs offline so a weak signal never costs a round. Run in InspectWrk, every finding is timestamped and exports as a single education report aligned to fire safety regulations, PAT testing standards and the Health and Safety at Work Act.

More education checklists.