InspectWrk

Cooling Tower Water Treatment System Preventive Maintenance Checklist

Use this cooling tower water treatment system preventive maintenance checklist to inspect treatment system identification, chemical dosing equipment, ph and conductivity, water chemistry and treatment program, biocide program, and corrosion and scale control, recording pass, fail, or N/A and capturing a photo on anything that needs proof.

8 sections24 questions13 to 24 minutesFree

Cooling Tower Water Treatment System Preventive MaintenanceTower A · Treatment System Identification0 of 3 checked
  • Record the cooling tower system and its water-treatment program reference.Facilities team reviewing site status in a plant control roomPhoto Added
  • Confirm the treatment system matches the asset register and PM schedule.Facilities team reviewing site status in a plant control roomPhoto Added
  • Confirm the treatment supplier and program documentation are current.Facilities team reviewing site status in a plant control roomPhoto Added
Free on iOS and AndroidGet the App

What’s in this checklist.

8 sections · 24 questions · 13 to 24 minutes · Free

    1. Record the cooling tower system and its water-treatment program reference.

    2. Confirm the treatment system matches the asset register and PM schedule.

    3. Confirm the treatment supplier and program documentation are current.

    1. Inspect dosing pumps, lines, and injection points for leaks and correct operation.

    2. Confirm chemical drums, day tanks, and containment are in good condition.

    3. Check calibration of dosing equipment against the program.

    1. Record the circulating water pH and compare it to the target range.

    2. Record conductivity and confirm it is within the control band.

    3. Confirm probes and analyzers are calibrated and reading correctly.

    1. Review water chemistry results against the treatment program limits.

    2. Confirm inhibitor and treatment levels are dosed to specification.

    3. Record any out-of-range parameters and program adjustments.

    1. Confirm biocide dosing and rotation follow the treatment program.

    2. Record microbiological and dip-slide results where taken.

    3. Confirm Legionella control measures follow the site water-safety plan.

    1. Review corrosion and scale indicators and any coupon results.

    2. Confirm corrosion inhibitor and scale control dosing are effective.

    3. Note fouling trends that require program changes.

    1. Confirm the automatic blowdown or bleed controls to the conductivity setpoint.

    2. Check make-up and bleed metering where fitted.

    3. Record overall water quality observations.

    1. Confirm treatment results and dosing are logged in the water-treatment records.

    2. Capture a photo of every failed item as evidence.

    3. Raise a corrective action with an owner and due date for each deficiency.

How the Cooling Tower Water Treatment System Preventive Maintenance checklist works.

Three steps, about 13 to 24 minutes.

  1. Work through each section

    Section by section, one check at a time.

  2. Log every finding

    Tap Fail, add a photo, assign who fixes it.

  3. Sign off and share

    The report is ready the moment you finish.

Same checklist, two ways to run it.

Paper for a one-off check. The app when every finding needs fixing.

Printed PDF

  • Pen on paper
  • Photos in your camera roll
  • Report typed up later

InspectWrk appRecommended

  • Photos on every finding
  • Owner and due date per finding
  • Report ready at sign-off
Get the App

Branded checklist

Get Your Company Branded Checklist

Customize with your logo and company details.

We respect your privacy. No spam, ever.

What is a cooling tower water treatment system preventive maintenance checklist?

Quick answer

A cooling tower water treatment system preventive maintenance checklist is the planned maintenance verification used to confirm the water treatment plant delivers water to specification with dosing, filtration, and monitoring in control that facilities management teams use to check the key inspection points, assign owners to any failures, and close them with photo proof. Completed in InspectWrk, it is timestamped, works offline, and exports as an audit-ready facilities management report for OSHA, ISO 41001 and fire NOC and lift license requirements.

A cooling tower water treatment system preventive maintenance checklist is the planned maintenance verification used to confirm the water treatment plant delivers water to specification with dosing, filtration, and monitoring in control that facilities management teams use to check treatment system identification, chemical dosing equipment, ph and conductivity, water chemistry and treatment program, biocide program, and corrosion and scale control, capture photo evidence, and track corrective actions to closure. Its job is to confirm the water treatment plant delivers water to specification with dosing, filtration, and monitoring in control.

Why does cooling tower water treatment system preventive maintenance still run on memory?

Water treatment operators and plant managers still miss dosing out of range, fouled or blinded filters and readings outside limits when rounds are ticked without reading log photo, dosing pump photo and sample result note.

Without inspection records, teams reconstruct the evidence from phones instead of proving OSHA, ISO 41001 and fire NOC and lift license requirements readiness.

Before and After InspectWrk

Before InspectWrk

  • Centre managers send daily round photos on WhatsApp at the end of the shift.
  • Cooling tower water checks are ticked on paper without photo evidence per finding.
  • Missed PPM and AMC expiry surface when a client complaint lands, not when they happened.

After InspectWrk

  • Centre managers complete the preventive maintenance check in the app with photo evidence at the cooling tower water treatment system, even offline.
  • Managers see open findings, closure status, and OSHA, ISO 41001 and fire NOC and lift license requirements evidence live on one dashboard.
  • Overdue PPM, AMC expiry, and missed checks escalate automatically before the client or auditor notices.

Why is a cooling tower water treatment system preventive maintenance checklist important?

It helps centre managers and supervisors keep facilities management work consistent, safe, and auditable, with the evidence needed for OSHA, ISO 41001 and fire NOC and lift license requirements:

  • Cover the full inspection: structured checks across treatment system identification, chemical dosing equipment, ph and conductivity, and water chemistry and treatment program surface dosing out of range, fouled or blinded filters and readings outside limits before they reach handover, audit, or the next shift.
  • Document facilities management findings with the right proof: capture reading log photo, dosing pump photo and sample result note on every issue so nothing rests on memory.
  • Track facilities management fixes to closure: each failure becomes an action with an owner, a due date, and a re-inspection that confirms it is done.
  • Stay audit-ready: keep one timestamped record for OSHA, ISO 41001 and fire NOC and lift license requirements you can export instead of rebuilding it from scattered photos and spreadsheets.

What should be included in a cooling tower water treatment system preventive maintenance checklist?

A complete cooling tower water treatment system preventive maintenance checklist works through treatment system identification, chemical dosing equipment, ph and conductivity, water chemistry and treatment program, biocide program, and corrosion and scale control, then records inspection context, scored checkpoints, and evidence with corrective actions:

Inspection context

Record where and when the inspection runs:

  • Site, facilities management location, and asset identification
  • Inspector, date, and the facilities management areas or assets in scope
  • Reference numbers or schedules linked to the checklist

Checkpoints and scoring

Define what each checkpoint verifies and how results are scored:

  • Treatment System Identification
  • Chemical Dosing Equipment
  • pH & Conductivity
  • Water Chemistry & Treatment Program
  • Biocide Program
  • Corrosion & Scale Control
  • 16 fields aligned to the checklist

Evidence and corrective actions

Make every finding traceable and actionable:

  • Capture reading log photo, dosing pump photo and sample result note on failed or critical items
  • Retain inspection records with the inspection record
  • Sign-off, completion status, and follow-up notes

How do teams use a cooling tower water treatment system preventive maintenance checklist?

Follow these steps to run the cooling tower water treatment system preventive maintenance checklist:

  1. Confirm the cooling tower water treatment system ID, last service date, and maintenance interval before you start.
  2. Complete treatment system identification, chemical dosing equipment, ph and conductivity, water chemistry and treatment program, biocide program, and corrosion and scale control; note parts replaced and readings.
  3. Photograph dosing out of range, fouled or blinded filters and readings outside limits that triggers a follow-up work order.
  4. Assign cooling tower water treatment system maintenance actions with priority and owner; link to the asset record.
  5. Sign off and update the cooling tower water treatment system maintenance log so the next due date calculates automatically.

See how this checklist fits into Facility maintenance software.

This checklist runs as a mobile inspection app that works fully offline on site, with AI-powered defect detection on every photo. To see it on your own workflows, talk to our team.

AI-Powered Features for Your Field Workflows

Submit an inspection and AI writes the PDF report and Excel sheet for you. No admin, no waiting.

01 / 05Photo to formVISION AI

Take a Photo. AI Fills the Form.

Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically.

No typing. No manual entry.

02 / 05Voice to textVOICE AI

Speak. AI Writes It Down.

Inspectors speak their observations in any language. AI transcribes and fills the form in real time.

Completely hands-free in the field.

03 / 05Auto reportsREPORT AI

AI Writes the Report. PDF and Excel, Instantly.

The moment an inspection is submitted, AI summarises the findings and builds a branded PDF report and an Excel sheet for you.

No manual reporting. No copy-paste.

04 / 05IntegrationsINTEGRATIONS

Connect Your Existing Tools.

InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP.

No double entry.

05 / 05Live dashboardLIVE DATA

Live Dashboard. Every Site. Always On.

Your operations team sees completion rates, open issues, and compliance scores across all sites in real time.

No chasing updates.

One Platform. Mobile-First. AI-Powered.

  • Collaborate

    Collaborate with your team anytime, anywhere

    See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.

    • Organise inspection data by site, team, and date
    • Assign checks to the inspector or vendor responsible
    • Track completion across every location in one view
    • Keep field and back-office in sync in real time
    • Comment on findings without leaving the inspection
  • Custom Reports

    Custom reports that guide your decision making

    Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.

    • Branded PDF and CSV export from any completed inspection
    • Schedule weekly or monthly delivery to managers and clients
    • Share to email, Drive, Teams, or Slack in one click
    • Filter findings by site, severity, or corrective-action status
  • Powerful Analytics

    Analyse your inspection data with confidence

    See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.

    Powerful dashboard
    Combine multiple reports into one dashboard so you can monitor status, bottlenecks, and completion trends at a glance.
    Always in sync
    Changes sync across devices so inspectors, supervisors, and back-office teams always see the latest responses and attachments.
    Embedded analytics
    Explore checklist data with charts and breakdowns that stay tied to the underlying inspections, without exporting to spreadsheets.

Cooling Tower Water Treatment System Preventive Maintenancequestions

See this checklist running on your own sites in a 30-minute demo.

Book a Free Demo

It is scoped to the preventive maintenance cadence and controls that centre managers, facility managers, AFM and CE teams, operations directors run, not a one-off handover walk. It prompts treatment system identification, chemical dosing equipment, ph and conductivity, water chemistry and treatment program, biocide program, and corrosion and scale control, watching for dosing out of range, fouled or blinded filters and readings outside limits, records pass, fail, or N/A with reading log photo, dosing pump photo and sample result note on critical items, and raises corrective actions with owners before sign-off. Run in InspectWrk, the record is timestamped and rolls into trend reports so repeat failures surface before the next audit.

They work through each checkpoint to confirm the water treatment plant delivers water to specification with dosing, filtration, and monitoring in control, confirm the required controls are in place, and capture reading log photo, dosing pump photo and sample result note on anything that fails or needs proof. Priority failure modes include dosing out of range, fouled or blinded filters and readings outside limits. Each checkpoint takes pass, fail, or N/A, and a failed item stays open until the fix is verified.

It expects reading log photo, dosing pump photo and sample result note, plus inspection records on failed or critical items, so findings rest on proof rather than memory. Records support OSHA, ISO 41001 and fire NOC and lift license requirements, and every photo, note, and sign-off stays attached to the inspection instead of living in chat threads.

The cooling tower water treatment system preventive maintenance checklist covers treatment system identification, chemical dosing equipment, ph and conductivity, water chemistry and treatment program, biocide program, and corrosion and scale control. On each checkpoint, centre managers record pass, fail, or N/A, add a photo on anything that needs proof, and raise a corrective action with an owner and due date. Run in InspectWrk, the inspection is timestamped, traceable to whoever completed it, and exports as a single facilities management report aligned to OSHA, ISO 41001 and fire NOC and lift license requirements.

More facilities management checklists.

  • Technician in red hard hat checking a wall mounted fire alarm panel beside red pipes
    Facilities27,400+ downloads

    Maintenance Checklist

    Run the Maintenance Checklist on the InspectWrk app to capture photo evidence per finding and generate audit-ready reports.

    • Maintenance
    • Repair
    Get Checklist: Maintenance Checklist