InspectWrk

Generator Fuel Storage Tank Inspection Checklist

Use this generator fuel storage tank inspection checklist to review tank identification and fuel type, tank condition and corrosion, fuel level and gauges, valves, piping and fittings, venting and fill connections, and secondary containment and spill evidence, capturing photo evidence per finding and tracking each fix through to closure.

8 sections24 questions14 to 26 minutesFree

Generator Fuel Storage Tank InspectionTower A · Tank Identification & Fuel Type0 of 3 checked
  • Record the tank identification, capacity, and fuel type.Facilities team reviewing site status in a plant control roomPhoto Added
  • Confirm the tank matches the asset register and inspection schedule.Facilities team reviewing site status in a plant control roomPhoto Added
  • Confirm the tank supports the generator it serves.Facilities team reviewing site status in a plant control roomPhoto Added
Free on iOS and AndroidGet the App

What’s in this checklist.

8 sections · 24 questions · 14 to 26 minutes · Free

    1. Record the tank identification, capacity, and fuel type.

    2. Confirm the tank matches the asset register and inspection schedule.

    3. Confirm the tank supports the generator it serves.

    1. Inspect the tank shell, supports, and coatings for corrosion and damage.

    2. Check for dents, bulging, and structural distortion.

    3. Confirm the tank is stable and correctly supported.

    1. Record the fuel level and compare it to the required minimum.

    2. Confirm the level gauge reads accurately.

    3. Check any low-level alarm operates where fitted.

    1. Inspect valves, piping, and fittings for leaks and secure connections.

    2. Confirm isolation valves operate and are correctly positioned.

    3. Check supply and return lines to the generator.

    1. Confirm the tank vent is clear and unobstructed.

    2. Check the fill connection, cap, and any overfill protection.

    3. Verify spill containment at the fill point where fitted.

    1. Inspect the bund or secondary containment for integrity and standing liquid.

    2. Record any spill evidence, staining, or product on the ground.

    3. Confirm the containment drain valve is closed and controlled.

    1. Note fuel quality observations such as water, sediment, or contamination.

    2. Confirm access, signage, and labeling are correct and legible.

    3. Check housekeeping around the tank.

    1. Record leaks, corrosion, and containment deficiencies.

    2. Capture a photo of every failed item as evidence.

    3. Raise a corrective action with an owner and due date, and record the inspection.

How the Generator Fuel Storage Tank Inspection checklist works.

Three steps, about 14 to 26 minutes.

  1. Work through each section

    Section by section, one check at a time.

  2. Log every finding

    Tap Fail, add a photo, assign who fixes it.

  3. Sign off and share

    The report is ready the moment you finish.

Same checklist, two ways to run it.

Paper for a one-off check. The app when every finding needs fixing.

Printed PDF

  • Pen on paper
  • Photos in your camera roll
  • Report typed up later

InspectWrk appRecommended

  • Photos on every finding
  • Owner and due date per finding
  • Report ready at sign-off
Get the App

Branded checklist

Get Your Company Branded Checklist

Customize with your logo and company details.

We respect your privacy. No spam, ever.

What is a generator fuel storage tank inspection checklist?

Quick answer

A generator fuel storage tank inspection checklist is the structured inspection used to verify standby or prime generators will start, carry load, and remain fuel-ready that facilities management teams use to check the key inspection points, assign owners to any failures, and close them with photo proof. Completed in InspectWrk, it is timestamped, works offline, and exports as an audit-ready facilities management report for OSHA, ISO 41001 and fire NOC and lift license requirements.

A generator fuel storage tank inspection checklist is the structured inspection used to verify standby or prime generators will start, carry load, and remain fuel-ready that facilities management teams use to check tank identification and fuel type, tank condition and corrosion, fuel level and gauges, valves, piping and fittings, venting and fill connections, and secondary containment and spill evidence, capture photo evidence, and track corrective actions to closure. Its job is to verify standby or prime generators will start, carry load, and remain fuel-ready.

Why are generator fuel storage tank inspections still chased on WhatsApp?

Facilities engineers and generator technicians still miss flat starting battery, fuel contamination and failed auto-start when rounds are ticked without battery voltage, fuel gauge photo and start test log.

Without a single inspection record, teams reconstruct the evidence from phones instead of proving OSHA, ISO 41001 and fire NOC and lift license requirements readiness.

Before and After InspectWrk

Before InspectWrk

  • Centre managers send daily round photos on WhatsApp at the end of the shift.
  • Generator fuel storage checks are ticked on paper without photo evidence per finding.
  • Missed PPM and AMC expiry surface when a client complaint lands, not when they happened.

After InspectWrk

  • Centre managers complete the inspection in the app with photo evidence at the generator fuel storage tank, even offline.
  • Managers see open findings, closure status, and OSHA, ISO 41001 and fire NOC and lift license requirements evidence live on one dashboard.
  • Overdue PPM, AMC expiry, and missed checks escalate automatically before the client or auditor notices.

Why is a generator fuel storage tank inspection checklist important?

It helps centre managers and supervisors keep facilities management work consistent, safe, and auditable, with the evidence needed for OSHA, ISO 41001 and fire NOC and lift license requirements:

  • Cover the full inspection: structured checks across tank identification and fuel type, tank condition and corrosion, fuel level and gauges, and valves, piping and fittings surface flat starting battery, fuel contamination and failed auto-start before they reach handover, audit, or the next shift.
  • Document facilities management findings with the right proof: capture battery voltage, fuel gauge photo and start test log on every issue so nothing rests on memory.
  • Track facilities management fixes to closure: each failure becomes an action with an owner, a due date, and a re-inspection that confirms it is done.
  • Stay audit-ready: keep one timestamped record for OSHA, ISO 41001 and fire NOC and lift license requirements you can export instead of rebuilding it from scattered photos and spreadsheets.

What should be included in a generator fuel storage tank inspection checklist?

A complete generator fuel storage tank inspection checklist works through tank identification and fuel type, tank condition and corrosion, fuel level and gauges, valves, piping and fittings, venting and fill connections, and secondary containment and spill evidence, then records inspection context, scored checkpoints, and evidence with corrective actions:

Inspection context

Record where and when the inspection runs:

  • Site, facilities management location, and asset identification
  • Inspector, date, and the facilities management areas or assets in scope
  • Reference numbers or schedules linked to the checklist

Checkpoints and scoring

Define what each checkpoint verifies and how results are scored:

  • Tank Identification & Fuel Type
  • Tank Condition & Corrosion
  • Fuel Level & Gauges
  • Valves, Piping & Fittings
  • Venting & Fill Connections
  • Secondary Containment & Spill Evidence
  • 17 fields aligned to the checklist

Evidence and corrective actions

Make every finding traceable and actionable:

  • Capture battery voltage, fuel gauge photo and start test log on failed or critical items
  • Corrective actions with owners and due dates for facilities management teams
  • Sign-off, completion status, and follow-up notes

How do teams use a generator fuel storage tank inspection checklist?

Follow these steps to run the generator fuel storage tank inspection checklist:

  1. Fill in the generator fuel storage tank header: inspector, site, date, and areas in scope.
  2. Work through tank identification and fuel type, tank condition and corrosion, fuel level and gauges, valves, piping and fittings, venting and fill connections, and secondary containment and spill evidence in order, recording pass, fail, or N/A.
  3. Attach battery voltage, fuel gauge photo and start test log wherever a failure or observation needs proof.
  4. Raise actions for flat starting battery, fuel contamination and failed auto-start with owners and deadlines before sign-off.
  5. Review the generator fuel storage tank summary, share the report, and keep the record for your audit trail.

See how this checklist fits into Facility maintenance software.

This checklist runs as a mobile inspection app that works fully offline on site, with AI-powered defect detection on every photo. To see it on your own workflows, talk to our team.

AI-Powered Features for Your Field Workflows

Submit an inspection and AI writes the PDF report and Excel sheet for you. No admin, no waiting.

01 / 05Photo to formVISION AI

Take a Photo. AI Fills the Form.

Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically.

No typing. No manual entry.

02 / 05Voice to textVOICE AI

Speak. AI Writes It Down.

Inspectors speak their observations in any language. AI transcribes and fills the form in real time.

Completely hands-free in the field.

03 / 05Auto reportsREPORT AI

AI Writes the Report. PDF and Excel, Instantly.

The moment an inspection is submitted, AI summarises the findings and builds a branded PDF report and an Excel sheet for you.

No manual reporting. No copy-paste.

04 / 05IntegrationsINTEGRATIONS

Connect Your Existing Tools.

InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP.

No double entry.

05 / 05Live dashboardLIVE DATA

Live Dashboard. Every Site. Always On.

Your operations team sees completion rates, open issues, and compliance scores across all sites in real time.

No chasing updates.

One Platform. Mobile-First. AI-Powered.

  • Collaborate

    Collaborate with your team anytime, anywhere

    See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.

    • Organise inspection data by site, team, and date
    • Assign checks to the inspector or vendor responsible
    • Track completion across every location in one view
    • Keep field and back-office in sync in real time
    • Comment on findings without leaving the inspection
  • Custom Reports

    Custom reports that guide your decision making

    Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.

    • Branded PDF and CSV export from any completed inspection
    • Schedule weekly or monthly delivery to managers and clients
    • Share to email, Drive, Teams, or Slack in one click
    • Filter findings by site, severity, or corrective-action status
  • Powerful Analytics

    Analyse your inspection data with confidence

    See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.

    Powerful dashboard
    Combine multiple reports into one dashboard so you can monitor status, bottlenecks, and completion trends at a glance.
    Always in sync
    Changes sync across devices so inspectors, supervisors, and back-office teams always see the latest responses and attachments.
    Embedded analytics
    Explore checklist data with charts and breakdowns that stay tied to the underlying inspections, without exporting to spreadsheets.

Generator Fuel Storage Tank Inspectionquestions

See this checklist running on your own sites in a 30-minute demo.

Book a Free Demo

It is scoped to the scheduled cadence and controls that centre managers, facility managers, AFM and CE teams, operations directors run, not a one-off handover walk. It prompts tank identification and fuel type, tank condition and corrosion, fuel level and gauges, valves, piping and fittings, venting and fill connections, and secondary containment and spill evidence, watching for flat starting battery, fuel contamination and failed auto-start, records pass, fail, or N/A with battery voltage, fuel gauge photo and start test log on critical items, and raises corrective actions with owners before sign-off. Run in InspectWrk, the record is timestamped and rolls into trend reports so repeat failures surface before the next audit.

They work through each checkpoint to verify standby or prime generators will start, carry load, and remain fuel-ready, confirm the required controls are in place, and capture battery voltage, fuel gauge photo and start test log on anything that fails or needs proof. Priority failure modes include flat starting battery, fuel contamination and failed auto-start. Each checkpoint takes pass, fail, or N/A, and a failed item stays open until the fix is verified.

It expects battery voltage, fuel gauge photo and start test log on failed or critical items, so findings rest on proof rather than memory. Records support OSHA, ISO 41001 and fire NOC and lift license requirements, and every photo, note, and sign-off stays attached to the inspection instead of living in chat threads.

The generator fuel storage tank inspection checklist covers tank identification and fuel type, tank condition and corrosion, fuel level and gauges, valves, piping and fittings, venting and fill connections, and secondary containment and spill evidence. On each checkpoint, centre managers record pass, fail, or N/A, add a photo on anything that needs proof, and raise a corrective action with an owner and due date. Run in InspectWrk, the inspection is timestamped, traceable to whoever completed it, and exports as a single facilities management report aligned to OSHA, ISO 41001 and fire NOC and lift license requirements.

More facilities management checklists.

  • Technician in red hard hat checking a wall mounted fire alarm panel beside red pipes
    Facilities27,400+ downloads

    Maintenance Checklist

    Run the Maintenance Checklist on the InspectWrk app to capture photo evidence per finding and generate audit-ready reports.

    • Maintenance
    • Repair
    Get Checklist: Maintenance Checklist