Take a Photo. AI Fills the Form.
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically.
No typing. No manual entry.
Use this grease interceptor inspection checklist to review interceptor identification and location, access cover, structural condition, inlet and outlet, baffles, and grease accumulation, capturing photo evidence per finding and tracking each fix through to closure.
10 sections20 questions10 to 20 minutesFree
Photo Added
Photo Added
Photo Added10 sections · 20 questions · 10 to 20 minutes · Free
Record the interceptor location, type, and asset reference.
Confirm it is on the cleaning and inspection schedule.
Confirm the access cover is intact, sealed, and can be safely opened.
Check the cover and frame for corrosion and damage.
Inspect the interceptor body, walls, and fittings for cracks and corrosion.
Confirm the unit is watertight with no structural failure.
Inspect inlet and outlet connections for blockage and leaks.
Confirm flow enters and leaves correctly.
Inspect baffles and tees for damage, displacement, and blockage.
Confirm baffles are secure and functioning.
Measure the grease and floating layer against the pump-out threshold.
Confirm the interceptor is cleaned before capacity is exceeded.
Check the settled solids level and remove where required.
Confirm no solids carry over to the outlet.
Confirm free flow through the interceptor with no backing up.
Check for leaks and persistent odours indicating a fault.
Confirm the last pump-out and cleaning are logged with the hauler manifest.
Verify the next service is scheduled.
Record inspection findings with evidence.
Raise a corrective action with an owner and due date for each deficiency.
Three steps, about 10 to 20 minutes.
Section by section, one check at a time.
Tap Fail, add a photo, assign who fixes it.
The report is ready the moment you finish.
Paper for a one-off check. The app when every finding needs fixing.
Branded checklist
Customize with your logo and company details.
Quick answer
A grease interceptor inspection checklist is the structured inspection used to keep pipework, valves, fixtures, and drainage leak-free and serviceable that facilities management teams use to check the key inspection points, assign owners to any failures, and close them with photo proof. Completed in InspectWrk, it is timestamped, works offline, and exports as an audit-ready facilities management report for OSHA, ISO 41001 and fire NOC and lift license requirements.
A grease interceptor inspection checklist is the structured inspection used to keep pipework, valves, fixtures, and drainage leak-free and serviceable that facilities management teams use to check interceptor identification and location, access cover, structural condition, inlet and outlet, baffles, and grease accumulation, capture photo evidence, and track corrective actions to closure. Its job is to keep pipework, valves, fixtures, and drainage leak-free and serviceable. Inspect a grease interceptor or grease trap: interceptor identification and location, access cover, structural condition, inlet and outlet, baffles, grease accumulation, solids and debris, flow condition, leaks, odors, and cleaning and service status, with inspection records and corrective actions. It is sometimes called the Grease Trap Inspection Checklist or the Grease Interceptor Maintenance Checklist.
Maintenance technicians and plumbing contractors still miss joint leaks or water staining, seized or passing isolation valves and dripping taps and failed trap seals when rounds are ticked without leak or corrosion photo, valve and label photo and temperature reading.
Without service tags and inspection records, teams reconstruct the evidence from phones instead of proving OSHA, ISO 41001 and fire NOC and lift license requirements readiness.
It helps centre managers and supervisors keep facilities management work consistent, safe, and auditable, with the evidence needed for OSHA, ISO 41001 and fire NOC and lift license requirements:
A complete grease interceptor inspection checklist works through interceptor identification and location, access cover, structural condition, inlet and outlet, baffles, and grease accumulation, then records inspection context, scored checkpoints, and evidence with corrective actions:
Record where and when the inspection runs:
Define what each checkpoint verifies and how results are scored:
Make every finding traceable and actionable:
Follow these steps to run the grease interceptor inspection checklist:
See how this checklist fits into Facility management software.
This checklist runs as a mobile inspection app that works fully offline on site, with AI-powered defect detection on every photo. To see it on your own workflows, talk to our team.
Submit an inspection and AI writes the PDF report and Excel sheet for you. No admin, no waiting.
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically.
No typing. No manual entry.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time.
Completely hands-free in the field.
The moment an inspection is submitted, AI summarises the findings and builds a branded PDF report and an Excel sheet for you.
No manual reporting. No copy-paste.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP.
No double entry.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time.
No chasing updates.
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
See this checklist running on your own sites in a 30-minute demo.
Book a Free DemoIt is scoped to the scheduled cadence and controls that centre managers, facility managers, AFM and CE teams, operations directors run, not a one-off handover walk. It prompts interceptor identification and location, access cover, structural condition, inlet and outlet, baffles, and grease accumulation, watching for joint leaks or water staining, seized or passing isolation valves and dripping taps and failed trap seals, records pass, fail, or N/A with leak or corrosion photo, valve and label photo and temperature reading on critical items, and raises corrective actions with owners before sign-off. Run in InspectWrk, the record is timestamped and rolls into trend reports so repeat failures surface before the next audit.
They work through each checkpoint to keep pipework, valves, fixtures, and drainage leak-free and serviceable, confirm the required controls are in place, and capture leak or corrosion photo, valve and label photo and temperature reading on anything that fails or needs proof. Priority failure modes include joint leaks or water staining, seized or passing isolation valves and dripping taps and failed trap seals. Each checkpoint takes pass, fail, or N/A, and a failed item stays open until the fix is verified.
It expects leak or corrosion photo, valve and label photo and temperature reading, plus service tags and inspection records on failed or critical items, so findings rest on proof rather than memory. Records support OSHA, ISO 41001 and fire NOC and lift license requirements, and every photo, note, and sign-off stays attached to the inspection instead of living in chat threads.
The grease interceptor inspection checklist covers interceptor identification and location, access cover, structural condition, inlet and outlet, baffles, and grease accumulation. On each checkpoint, centre managers record pass, fail, or N/A, add a photo on anything that needs proof, and raise a corrective action with an owner and due date. Run in InspectWrk, the inspection is timestamped, traceable to whoever completed it, and exports as a single facilities management report aligned to OSHA, ISO 41001 and fire NOC and lift license requirements.

Standard site-level inspections for construction, safety, and compliance.

Complete work orders with checklist items, photos, and sign-off.

Inspect assets and equipment: condition, location, photos, and maintenance history.

Run the Maintenance Checklist on the InspectWrk app to capture photo evidence per finding and generate audit-ready reports.