Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Marine
Facilities Management Incident ReportingSoftware
Standardise facilities management incident reporting, capture records and evidence, turn exceptions into tracked corrective actions, and keep a defensible record across every site, all in one workflow.
InspectWrk is the software we provide to run this check workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Late or missed reporting
Reported by voice or chat, late or missed reporting is caught late and logged with no evidence tied to the asset.
Shallow investigation
Shallow investigation goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
No corrective actions
On a manual round no corrective actions is easy to miss, and hard to defend to an auditor after the fact.
Recurrence of the same incident
Recurrence of the same incident lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk is the layer that runs the facilities incident reporting inspection programme across teams and sites: one standard, scheduled cadence, and a live portfolio view. Here is how the programme runs.
- 1
Set the standard
Define the facilities incident reporting template and cadence once at group level; site overrides attach without breaking the baseline.
- 2
Schedule
Assign rounds to the right people and sites; the calendar runs the cadence, not a person.
- 3
Capture
Teams complete guided checks on mobile with evidence attached at the point of work.
- 4
Review
Managers see completion, open actions, and overdue items per site in real time.
- 5
Correct
Exceptions become owned actions with deadlines and verified closure.
- 6
Report
Portfolio dashboards and scheduled reports roll up every site without manual reconciliation.
Workflow
How Does a Facilities Management Incident Reporting Cycle Run from Field Capture to Audit-Ready Reporting?
The check workflow, end to end: Set requirements → Check → Record → Flag exception → Corrective action → Review → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Incident Programme Template
Where facilities management incident reporting evidence has to hold up, your incident controls become a mobile template with required photos and readings on what happened and when, injury, damage, or loss, immediate response, root cause investigation, and corrective actions and reporting, aligned to ISO 45001 and RIDDOR, so every site inspects to the same standard from day one.
- 2
Capture the Incident Check in the Field
On every facilities management incident reporting cycle, inspectors complete the incident programme on iOS or Android, offline where signal is poor, recording scene and injury photo, investigation record, and corrective action sign-off against each point before a named sign-off can close the round.
- 3
Route Incident Findings to Verified Closure
For Facilities Management teams running facilities management incident reporting, A failed item such as late or missed reporting becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so incident defects do not resurface unnoticed.
- 4
Report Incident Performance
Every incident programme feeds live dashboards and branded exports, so fm engineering managers see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for facilities management incident reporting
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
Across the facilities management incident reporting portfolio, facilities Management Incident Reporting schedules, renewal alerts, and completion tracking keep statutory and contractual cycles visible across the portfolio.
Structured Field Capture
On facilities management incident reporting programmes, structured facilities management incident reporting forms force the photo, reading, and sign-off before an item can close, so partial records never ship.
AI-assisted Evidence Capture
For facilities management incident reporting field teams, during facilities management incident reporting checks, on-device models surface probable issues from images, reducing keystrokes and overlooked items.
Portfolio Dashboards
Across multi-site facilities management incident reporting rounds, live dashboards give FM Engineering Managers per-site facilities management incident reporting completion and overdue findings in one view, replacing weekly spreadsheet roll-ups.
Audit-ready Exports
Where facilities management incident reporting evidence has to hold up, structured facilities management incident reporting history and branded PDFs let Facilities Management teams answer an auditor on the day, not after a week of reconstruction.
Offline-first Mobile Apps
On every facilities management incident reporting cycle, field teams complete facilities management incident reporting checks without connectivity; the app stores evidence locally and uploads it later intact.
Coverage
What Does an Incident Programme Cover?
An incident programme governs what happened and when, injury, damage, or loss, immediate response, root cause investigation, and corrective actions and reporting across the portfolio. FM Engineering Managers standardise the incident templates and schedule the cycles. They track incident completion per site. So incident work holds to one standard as the estate grows.
What Gets Checked
- What happened and when
- Injury, damage, or loss
- Immediate response
- Root cause investigation
- Corrective actions and reporting
Common Defects It Surfaces
- Late or missed reporting
- Shallow investigation
- No corrective actions
- Recurrence of the same incident
- Missing regulatory notification
Evidence Captured
- Scene and injury photo
- Investigation record
- Corrective action sign-off
Records align toISO 45001RIDDOR
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
FM Engineering Managers
A live view of incident programme status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided incident checks on mobile with offline capture, so late or missed reporting is caught and logged on the spot.
Compliance stakeholders
Searchable incident history and ISO 45001-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Facilities Management teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the facilities incident reporting management job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Programme governance | Each site runs its own facilities incident reporting checklist, so the standard drifts and group cannot enforce it. | One group template sets the standard; site overrides attach without breaking the baseline. |
| Scheduling and cadence | Rounds depend on someone remembering; missed cycles surface only when something goes wrong. | The schedule enforces the cadence per site and flags what is due, done, or overdue. |
| Roles and accountability | It is unclear who owns which check, so gaps fall between shifts and teams. | Role-based access scopes each inspector, manager, and contractor to what they own. |
| Portfolio visibility | Leadership reconciles spreadsheets from every site to see status three days late. | A live dashboard aggregates completion, open actions, and risk across every site at once. |
| Reporting | Programme reporting is a manual monthly assembly with inconsistent definitions. | Definitions stay identical across sites and reports generate on a schedule. |
Rollout
How Should Facilities Management Teams Pilot Facilities Management Incident Reporting Digitally Without Disrupting Operations?
Pilot on one site cluster
Prove the facilities management incident reporting workflow on one region first, checking that findings close on time and audit packs assemble cleanly before the next site group joins.
Scale templates and roles
Widen facilities management incident reporting coverage across the estate with permissions per role and templates that reflect each facilities management site's regulatory scope.
Connect reporting and integrations
Feed facilities management incident reporting results into portfolio dashboards and branded exports, and push findings to your CMMS, ERP, or GRC stack through the API where facilities management teams need it.
Before You Switch
What Programme Owners Ask
How do we keep one standard across many sites and teams?
The facilities incident reporting template lives at group level so the standard does not drift; site-specific overrides attach without breaking the corporate baseline, and role-based access scopes each team to what it owns.
How do managers see status without chasing every site?
A live dashboard rolls up completion, open actions, overdue items, and risk per site, with definitions the platform keeps identical so portfolio comparison is genuinely comparable.
Can we govern who can change templates and see data?
Yes. Role-based access separates programme owners, site managers, inspectors, and contractors, so template governance and evidence visibility match each role.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Facilities Management Incident Reporting Off Paper?
Inspections Across Industries
View All
Which Facilities Management Incident Reporting Checklist Templates Should You Try First?
Get started with inspection and audit checklist templates.
Inspections
Site Inspection Checklist
Standard site-level inspections for construction, safety, and compliance. Capture conditions, photos, and follow-ups in one place.
41,000+GET
Asset Management
Asset Inspection Checklist
Inspect assets and equipment: condition, location, photos, and maintenance history. Track condition over time.
28,900+GET
Work Orders
Work Order Checklist
Complete work orders with checklist items, photos, and sign-off. Track completion and proof of work.
31,800+GET
Maintenance
Maintenance Checklist
Preventive and corrective maintenance inspections. Log repairs, parts, and condition with photos and follow-ups.
27,400+GET
Which Facilities Management Incident Reporting Apps Run on iOS and Android?
Use these apps to run inspections and audits.
Frequently Asked Questions About Facilities Management Incident Reporting Software
What does Facilities Management Incident Reporting Software check on an incident programme?
Facilities Management Incident Reporting Software governs the incident programme across every site, covering what happened and when, injury, damage, or loss, immediate response, root cause investigation, and corrective actions and reporting. FM Engineering Managers standardise the templates and schedule the cycles, then track completion and overdue actions per location on one dashboard. That holds the work to a single standard as the facilities management estate grows, so a new site inherits the same checks the moment it is added. Every location runs the current version rather than a printout someone copied months ago.
How often should an incident programme be done?
How often incident checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Facilities Management Incident Reporting Software sets the cadence per site, reminds fm engineering managers before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset.
Which incident defects matter most, and what happens if they are missed?
The programme targets the incident failures that matter most: late or missed reporting, shallow investigation, no corrective actions, and recurrence of the same incident. Left unchecked, a fault such as late or missed reporting can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so fm engineering managers fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Facilities Management Incident Reporting Software support for incident work?
Facilities Management Incident Reporting Software keeps incident checks aligned to ISO 45001 and RIDDOR. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, fm engineering managers export a branded evidence pack built from scene and injury photo, investigation record, and corrective action sign-off, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run incident checks offline and across multiple sites?
Yes. Facilities Management Incident Reporting Software is offline-first: teams complete incident checks on iOS or Android with no signal, capturing scene and injury photo, investigation record, and corrective action sign-off in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So fm engineering managers get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves an incident programme was completed?
Every completed incident programme carries scene and injury photo, investigation record, and corrective action sign-off, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, fm engineering managers can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: