Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Food Safety
Food Hygiene InspectionSoftware
Run food hygiene inspection in the field, capture photo evidence, log defects, assign corrective actions, and keep a complete, provable inspection history, all in one workflow.
InspectWrk is the software we provide to run this inspection workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Hygiene or handwashing breach
Reported by voice or chat, hygiene or handwashing breach is caught late and logged with no evidence tied to the asset.
Temperature abuse
Temperature abuse goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Poor sanitation
On a manual round poor sanitation is easy to miss, and hard to defend to an auditor after the fact.
Cross-contamination risk
Cross-contamination risk lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the whole food hygiene inspection cycle on one mobile system, from the scan to the signed-off report. Here is the loop your team follows.
- 1
Inspect
Open the right food hygiene checklist by scanning the asset or location QR tag.
- 2
Capture
Record photos, readings, and signatures, offline where signal is poor.
- 3
Find
AI flags likely defects from the photo and the inspector confirms or overrides.
- 4
Correct
A failed item becomes an owned action with a severity and a deadline.
- 5
Verify
The finding stays open until a named approver signs off proof of the fix.
- 6
Report
A branded report generates on close-out and dashboards update across sites.
Workflow
How Does a Food Hygiene Inspection Cycle Run from Field Capture to Audit-Ready Reporting?
The inspection workflow, end to end: Plan → Inspect → Capture evidence → Record findings → Correct → Re-inspect → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Food Hygiene Inspection Template
Your food hygiene controls become a mobile template with required photos and readings on personal hygiene and PPE, temperature control and logs, cleaning and sanitation, cross-contamination controls, and pest control and waste, aligned to HACCP and local food safety rules, so every site inspects to the same standard from day one.
- 2
Capture the Food Hygiene Check in the Field
Inspectors complete the food hygiene inspection on iOS or Android, offline where signal is poor, recording temperature log photo, cleaning record, and hygiene condition photo against each point before a named sign-off can close the round.
- 3
Route Food Hygiene Findings to Verified Closure
A failed item such as hygiene or handwashing breach becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so food hygiene defects do not resurface unnoticed.
- 4
Report Food Hygiene Performance
Every food hygiene inspection feeds live dashboards and branded exports, so operations directors see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for food hygiene inspection
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
Food Hygiene Inspection schedules, renewal alerts, and completion tracking keep statutory and contractual cycles visible across the portfolio.
Structured Field Capture
Each food hygiene inspection entry carries inspector identity, timestamp, and required photos, so a Food & Beverage record is complete by construction.
AI-assisted Evidence Capture
AI photo review turns food hygiene inspection evidence into draft findings on the spot, which the inspector accepts, edits, or rejects.
Portfolio Dashboards
Live dashboards give Operations Directors per-site food hygiene inspection completion and overdue findings in one view, replacing weekly spreadsheet roll-ups.
Audit-ready Exports
Searchable food hygiene inspection records mean any past check is retrievable instantly, so Operations Directors stop rebuilding history from drives.
Offline-first Mobile Apps
Field teams complete food hygiene inspection checks without connectivity; the app stores evidence locally and uploads it later intact.
Coverage
What Does a Food Hygiene Inspection Cover?
A food hygiene inspection covers personal hygiene and PPE, temperature control and logs, cleaning and sanitation, cross-contamination controls, and pest control and waste. Operations directors capture a photo and a reading on each food hygiene point. They work offline where signal is poor, then sign the food hygiene round off. So every food hygiene record proves what was checked, when, and by whom.
What Gets Checked
- Personal hygiene and PPE
- Temperature control and logs
- Cleaning and sanitation
- Cross-contamination controls
- Pest control and waste
Common Defects It Surfaces
- Hygiene or handwashing breach
- Temperature abuse
- Poor sanitation
- Cross-contamination risk
- Pest evidence
Evidence Captured
- Temperature log photo
- Cleaning record
- Hygiene condition photo
Records align toHACCPlocal food safety rules
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
Operations Directors
A live view of food hygiene inspection status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided food hygiene checks on mobile with offline capture, so hygiene or handwashing breach is caught and logged on the spot.
Compliance stakeholders
Searchable food hygiene history and HACCP-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Food & Beverage teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the food hygiene inspection job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Inspection execution | Checks like personal hygiene and PPE are run on paper or from memory, so coverage and cadence vary by inspector and shift. | Guided food hygiene templates run the same way every time, with required fields and photos before sign-off. |
| Evidence capture | Photos sit on personal phones and in chat threads with no link to the asset or the check. | Evidence attaches to the record at the point of work, with inspector, timestamp, and location. |
| Defect identification | A fault such as hygiene or handwashing breach is spotted late or missed entirely between rounds. | AI surfaces likely defects from the photo and the inspector confirms the finding on the spot. |
| Corrective action | Failed items are noted but ownership, deadlines, and proof of the fix are unclear. | Each failure becomes a tracked action with an owner, a due date, and photo-verified closure. |
| Reporting | Reports are assembled by hand and HACCP evidence is hard to retrieve, days after the round. | Reports generate on close-out aligned to HACCP, and managers see status across every site live. |
Rollout
How Should Food & Beverage Teams Pilot Food Hygiene Inspection Digitally Without Disrupting Operations?
Pilot on one site cluster
Run the first food hygiene inspection cycle on one site cluster and compare it to your current process on capture speed, evidence completeness, and overdue actions before scaling.
Scale templates and roles
As more food & beverage sites come on, give each role the food hygiene inspection views they need and align every template to the codes Operations Directors answer for.
Connect reporting and integrations
Publish food hygiene inspection performance to portfolio dashboards, export branded audit packs, and integrate with the food & beverage systems that own work orders and records.
Before You Switch
Common Questions Before You Start
We already run food hygiene checks on paper. Do we have to change our process?
No. Your existing checklist becomes a mobile template, so the same checks run with photos, timestamps, and named sign-off attached. Only the capture changes.
Will field teams actually use it?
The check runs on the device they already carry, works offline where signal drops, and opens the right checklist from a QR scan, so there is no typing from memory.
What happens when a defect is found?
It becomes an owned action with a severity and a deadline, and stays open until a named approver verifies the fix with photo proof.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Food Hygiene Inspection Off Paper?
Inspections Across Industries
View All
Which Food Hygiene Inspection Checklist Templates Should You Try First?
Get started with inspection and audit checklist templates.
Food and beverage audit
Food Hygiene Inspection Checklist
Food safety officers use this inspection for food hygiene to verify food condition and safety controls, hygiene verification and compliance records and photo evidence, capture photo evidence on every finding, and track corrective actions to verified closure, building the evidence food-beverage teams need for FSSAI, HACCP and ISO 22000.
500+GET
Safety & Compliance
Food Safety Inspection Checklist
Food safety and hygiene inspections: temperature checks, cleanliness, HACCP points, and corrective actions. Audit-ready evidence.
33,500+GET
Kitchen Equipment
Commercial Oven Inspection Checklist
Inspect a commercial oven end to end: heating elements or burners, temperature controls, thermostat, door and gasket, hinges, gas and electrical connections, ignition, safety controls, racks, chamber, ventilation, and cleanliness, with photo evidence and corrective actions.
9,100+GET
Kitchen Equipment
Ice Machine Preventive Maintenance Checklist
Service a commercial ice machine end to end: water inlet, water filter, water distribution, evaporator, condenser and condenser coil, pump, drain, ice production, ice bin, scale, leaks, temperature, and electrical condition, with cleaning, sanitation, and maintenance records.
8,400+GET
Which Food Hygiene Inspection Apps Run on iOS and Android?
Use these apps to run inspections and audits.
Frequently Asked Questions About Food Hygiene Inspection Software
What does Food Hygiene Inspection Software check on a food hygiene inspection?
Food Hygiene Inspection Software runs a structured food hygiene inspection covering personal hygiene and PPE, temperature control and logs, cleaning and sanitation, cross-contamination controls, and pest control and waste. Each point is captured on mobile with a photo and a reading, and a named inspector signs the round off before it can close. The same template runs on every site, so operations directors work to one standard rather than a version that drifts between locations. Every record proves what was checked, when, and by whom, so the evidence is ready long before an assessor asks for it.
How often should a food hygiene inspection be done?
How often food hygiene checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Food Hygiene Inspection Software sets the cadence per site, reminds operations directors before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset.
Which food hygiene defects matter most, and what happens if they are missed?
The inspection targets the food hygiene failures that matter most: hygiene or handwashing breach, temperature abuse, poor sanitation, and cross-contamination risk. Left unchecked, a fault such as hygiene or handwashing breach can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so operations directors fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Food Hygiene Inspection Software support for food hygiene work?
Food Hygiene Inspection Software keeps food hygiene checks aligned to HACCP and local food safety rules. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, operations directors export a branded evidence pack built from temperature log photo, cleaning record, and hygiene condition photo, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run food hygiene checks offline and across multiple sites?
Yes. Food Hygiene Inspection Software is offline-first: teams complete food hygiene checks on iOS or Android with no signal, capturing temperature log photo, cleaning record, and hygiene condition photo in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So operations directors get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a food hygiene inspection was completed?
Every completed food hygiene inspection carries temperature log photo, cleaning record, and hygiene condition photo, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, operations directors can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: