Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Quality & Compliance
SCADA ComplianceSoftware
Plan and score SCADA compliance, capture evidence against every requirement, turn findings into tracked corrective actions, and produce audit-ready reports, all in one workflow.
InspectWrk is the software we provide to run this audit workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
RTU or PLC fault
Reported by voice or chat, RTU or PLC fault is caught late and logged with no evidence tied to the asset.
Comms loss or no redundancy
Comms loss or no redundancy goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Alarm flood or wrong setpoint
On a manual round alarm flood or wrong setpoint is easy to miss, and hard to defend to an auditor after the fact.
Logging gap
Logging gap lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk proves SCADA compliance to the standard: map the requirements, check them, evidence each one, close gaps, and keep a defensible, always-ready record.
- 1
Map requirements
Turn the SCADA requirements into a structured checklist tied to the standard.
- 2
Check
Complete each requirement on mobile with evidence attached at the point of work.
- 3
Evidence
Every record carries inspector identity, timestamp, and required photos.
- 4
Gap
A missed requirement becomes an owned action with a deadline.
- 5
Remediate
Actions stay open until verified, so gaps do not persist between audits.
- 6
Certify
Evidence packs export per site in the format the authority accepts.
Workflow
How Does a SCADA Compliance Programme Run from Field Capture to Leadership Reporting?
The audit workflow, end to end: Plan → Assess & score → Capture evidence → Record findings → Corrective action → Verify closure → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the SCADA Compliance Check Template
Across multi-site SCADA compliance rounds, your SCADA controls become a mobile template with required photos and readings on RTU and PLC status, communications and redundancy, alarms and setpoints, data logging and historian, and access control and cybersecurity, aligned to IEC 62443 and ISA-95, so every site inspects to the same standard from day one.
- 2
Capture the SCADA Check in the Field
Inspectors complete the SCADA compliance check on iOS or Android, offline where signal is poor, recording system status screenshot, alarm log note, and access record against each point before a named sign-off can close the round.
- 3
Route SCADA Findings to Verified Closure
On every SCADA compliance cycle, A failed item such as rtu or plc fault becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so SCADA defects do not resurface unnoticed.
- 4
Report SCADA Performance
Every SCADA compliance check feeds live dashboards and branded exports, so fm engineering managers see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for SCADA compliance
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
On SCADA compliance programmes, SCADA Compliance cadence is enforced per asset: the next check is booked the moment the last one closes, so nothing silently slips off the plan.
Structured Field Capture
For SCADA compliance field teams, required-field SCADA compliance capture means no skipped questions and no missing evidence, even when the round is rushed.
AI-assisted Evidence Capture
Across multi-site SCADA compliance rounds, on-device AI flags likely defects in SCADA compliance photos and pre-fills findings, so inspectors type less and miss less in the field.
Portfolio Dashboards
Where SCADA compliance evidence has to hold up, FM Engineering Managers see SCADA compliance completion, overdue actions, and risk hotspots across the Facilities Management portfolio without assembling a report.
Audit-ready Exports
On every SCADA compliance cycle, branded PDF packs and searchable SCADA compliance history assemble Facilities Management audit evidence for clients, insurers, and regulators in minutes.
Offline-first Mobile Apps
For Facilities Management teams running SCADA compliance, no signal, no problem: SCADA compliance evidence is captured on-device and uploaded the moment the inspector is back in range.
Coverage
What Does a SCADA Compliance Check Cover?
SCADA compliance evidences the required checks on RTU and PLC status, communications and redundancy, alarms and setpoints, data logging and historian, and access control and cybersecurity. The photos and readings each SCADA rule expects are mandatory fields. SCADA renewals are flagged before they lapse. So SCADA compliance stays a documented fact, not an assurance.
What Gets Checked
- RTU and PLC status
- Communications and redundancy
- Alarms and setpoints
- Data logging and historian
- Access control and cybersecurity
Common Defects It Surfaces
- RTU or PLC fault
- Comms loss or no redundancy
- Alarm flood or wrong setpoint
- Logging gap
- Weak access control
Evidence Captured
- System status screenshot
- Alarm log note
- Access record
Records align toIEC 62443ISA-95
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
FM Engineering Managers
A live view of SCADA compliance check status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided SCADA checks on mobile with offline capture, so rtu or plc fault is caught and logged on the spot.
Compliance stakeholders
Searchable SCADA history and IEC 62443-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Facilities Management teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the SCADA compliance job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Requirement coverage | SCADA requirements such as RTU and PLC status are tracked in a spreadsheet, so it is unclear what is covered and what is overdue. | Each requirement is a structured check tied to the standard, with a clear covered / due / overdue status. |
| Evidence chain | Proof of a check such as RTU or PLC fault sits across drives and email with no chain of custody. | Every record carries inspector, timestamp, asset, and required photos as an audit-grade chain. |
| Documentation | Documents live in filing cabinets and personal inboxes. | Records are searchable and retrievable per site, per asset, and per requirement. |
| Standard traceability | Mapping a record back to the specific IEC 62443 clause is manual and error-prone. | Each check maps to its requirement aligned to IEC 62443, so traceability is built in. |
| Renewal and defensibility | Renewals lapse silently and the pack is assembled under pressure. | Statutory clocks alert before each renewal, and the compliance pack is always ready. |
Rollout
How Should Teams Pilot Digital SCADA Compliance Workflows Before Portfolio Rollout?
Pilot on one site cluster
Prove the SCADA compliance workflow on one region first, checking that findings close on time and audit packs assemble cleanly before the next site group joins.
Scale templates and roles
Widen SCADA compliance coverage across the estate with permissions per role and templates that reflect each facilities management site's regulatory scope.
Connect reporting and integrations
Turn on live SCADA compliance reporting for FM Engineering Managers, and route readings and defects into the CMMS or compliance system of record so nothing is re-keyed.
Before You Switch
What Compliance Teams Ask
Can it prove SCADA compliance to an auditor?
Yes. Every record carries inspector identity, a timestamp, asset confirmation, and required photos, and evidence packs export per site in the format the authority accepts.
How do we stop renewals lapsing?
Statutory clocks track each renewal date and alert 30, 60, and 90 days ahead, so nothing lapses quietly and the pack is ready before it is requested.
Can we trace a record back to the requirement it satisfies?
Each check maps to its requirement, so traceability to the standard is built into the record rather than reconstructed by hand.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move SCADA Compliance Off Paper?
Inspections Across Industries
View All
Which SCADA Compliance Templates Should You Start With?
Get started with inspection and audit checklist templates.
Inspections
Site Inspection Checklist
Standard site-level inspections for construction, safety, and compliance. Capture conditions, photos, and follow-ups in one place.
41,000+GET
Asset Management
Asset Inspection Checklist
Inspect assets and equipment: condition, location, photos, and maintenance history. Track condition over time.
28,900+GET
Work Orders
Work Order Checklist
Complete work orders with checklist items, photos, and sign-off. Track completion and proof of work.
31,800+GET
Maintenance
Maintenance Checklist
Preventive and corrective maintenance inspections. Log repairs, parts, and condition with photos and follow-ups.
27,400+GET
Frequently Asked Questions About SCADA Compliance Software
What does SCADA Compliance Software check on a SCADA compliance check?
SCADA Compliance Software keeps SCADA compliance current by evidencing RTU and PLC status, communications and redundancy, alarms and setpoints, data logging and historian, and access control and cybersecurity. The photos and readings each rule expects are mandatory fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. Renewals and statutory due dates are flagged before they lapse. When an assessor asks, fm engineering managers export a branded, audit-ready pack and full history for the site in scope in seconds, not after days of digging through folders.
How often should a SCADA compliance check be done?
How often SCADA checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. SCADA Compliance Software sets the cadence per site, reminds fm engineering managers before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset. SCADA Compliance Software is the mobile tool FM Engineering Managers use to run SCADA compliance checks across every facilities management site from one app.
Which SCADA defects matter most, and what happens if they are missed?
The compliance check targets the SCADA failures that matter most: RTU or PLC fault, comms loss or no redundancy, alarm flood or wrong setpoint, and logging gap. Left unchecked, a fault such as rtu or plc fault can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so fm engineering managers fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does SCADA Compliance Software support for SCADA work?
SCADA Compliance Software keeps SCADA checks aligned to IEC 62443 and ISA-95. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, fm engineering managers export a branded evidence pack built from system status screenshot, alarm log note, and access record, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run SCADA checks offline and across multiple sites?
Yes. SCADA Compliance Software is offline-first: teams complete SCADA checks on iOS or Android with no signal, capturing system status screenshot, alarm log note, and access record in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So fm engineering managers get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a SCADA compliance check was completed?
Every completed SCADA compliance check carries system status screenshot, alarm log note, and access record, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, fm engineering managers can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: