Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Quality & Compliance
Travelator AuditSoftware
Plan and score travelator audit, capture evidence against every requirement, turn findings into tracked corrective actions, and produce audit-ready reports, all in one workflow.
InspectWrk is the software we provide to run this audit workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Worn comb or damaged pallet
Reported by voice or chat, worn comb or damaged pallet is caught late and logged with no evidence tied to the asset.
Handrail speed mismatch
Handrail speed mismatch goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Brake or safety device fault
On a manual round brake or safety device fault is easy to miss, and hard to defend to an auditor after the fact.
Chain wear
Chain wear lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk runs the travelator audit as a scored assessment that produces a defensible pack: plan, score against the rubric, evidence every finding, and drive corrective action to closure.
- 1
Plan
Schedule the travelator audit and load the rubric the regulator, insurer, or client expects.
- 2
Score
Assess each category and score it, so the result is comparable audit to audit.
- 3
Evidence
Attach a photo and note to each finding, with inspector, timestamp, and location.
- 4
Finding
Every non-conformance becomes a corrective action with a severity and owner.
- 5
CAPA
Actions stay open until a named approver verifies the fix.
- 6
Report
A branded, scored audit pack exports in one click for the reviewer.
Workflow
How Does a Travelator Audit Programme Run from Field Capture to Leadership Reporting?
The audit workflow, end to end: Plan → Assess & score → Capture evidence → Record findings → Corrective action → Verify closure → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Travelator Audit Template
In Facilities Management travelator audit operations, your travelator controls become a mobile template with required photos and readings on pallet band and comb plates, handrail speed and condition, brakes and safety devices, drive and chain, and incline, lighting, and signage, aligned to BS EN 115, so every site inspects to the same standard from day one.
- 2
Capture the Travelator Check in the Field
Inspectors complete the travelator audit on iOS or Android, offline where signal is poor, recording safety device test note, pallet and comb photo, and brake check record against each point before a named sign-off can close the round.
- 3
Route Travelator Findings to Verified Closure
On travelator audit programmes, A failed item such as worn comb or damaged pallet becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so travelator defects do not resurface unnoticed.
- 4
Report Travelator Performance
For travelator audit field teams, every travelator audit feeds live dashboards and branded exports, so fm engineering managers see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for travelator audit
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
On every travelator audit cycle, travelator Audit scheduling ties each renewal to its asset and owner, so Facilities Management cycles stay defensible without a manual tracker.
Structured Field Capture
For Facilities Management teams running travelator audit, field teams run travelator audit checks on a guided template that captures evidence inline, replacing loose paper and chat threads.
AI-assisted Evidence Capture
In Facilities Management travelator audit operations, image recognition pre-tags travelator audit findings, so a Facilities Management inspector spends time judging risk rather than writing it up.
Portfolio Dashboards
Across the travelator audit portfolio, one screen shows every site's travelator audit status, so FM Engineering Managers spot the failing location before it becomes a Facilities Management incident.
Audit-ready Exports
On travelator audit programmes, branded PDF packs and searchable travelator audit history assemble Facilities Management audit evidence for clients, insurers, and regulators in minutes.
Offline-first Mobile Apps
For travelator audit field teams, weak-signal sites stop being an excuse for missing travelator audit evidence, because capture and sync are decoupled on mobile.
Coverage
What Does a Travelator Audit Cover?
A travelator audit scores condition against BS EN 115, checking pallet band and comb plates, handrail speed and condition, brakes and safety devices, drive and chain, and incline, lighting, and signage. Each travelator finding is logged with a photo, a severity, and the failing point. So the travelator audit becomes a traceable evidence pack, not an ageing spreadsheet.
What Gets Checked
- Pallet band and comb plates
- Handrail speed and condition
- Brakes and safety devices
- Drive and chain
- Incline, lighting, and signage
Common Defects It Surfaces
- Worn comb or damaged pallet
- Handrail speed mismatch
- Brake or safety device fault
- Chain wear
- Lighting or signage fault
Evidence Captured
- Safety device test note
- Pallet and comb photo
- Brake check record
Records align toBS EN 115
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
FM Engineering Managers
A live view of travelator audit status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided travelator checks on mobile with offline capture, so worn comb or damaged pallet is caught and logged on the spot.
Compliance stakeholders
Searchable travelator history and BS EN 115-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Facilities Management teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the travelator audit job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Periodic scoring | Travelator audits, covering points like pallet band and comb plates, are scored on paper, so results are hard to compare across periods or sites. | Each audit is scored against a fixed rubric, so trend and site comparison are genuinely comparable. |
| Evidence per finding | A finding such as worn comb or damaged pallet is noted without a photo tied to the asset and time. | Every finding carries a photo, inspector identity, timestamp, and location. |
| Non-conformance to CAPA | Corrective actions live in email with no owner, deadline, or proof the fix happened. | Each non-conformance becomes a tracked action with severity, owner, and verified closure. |
| Audit trail | Historic audit records are scattered and slow to retrieve when a reviewer asks. | Twelve months of scored audits retrieve in one click with the full evidence trail. |
| Audit pack | The pack is assembled by hand the week of the review. | A branded, scored pack aligned to BS EN 115 exports the moment the audit closes. |
Rollout
How Should Teams Pilot Digital Travelator Audit Workflows Before Portfolio Rollout?
Pilot on one site cluster
Begin with one travelator audit template on a single cluster of facilities management sites, then read completion rates and closure times before you widen the rollout.
Scale templates and roles
Scale the travelator audit programme by cloning the proven template, then adjust it to local facilities management rules so every site inspects to one standard.
Connect reporting and integrations
Turn on live travelator audit reporting for FM Engineering Managers, and route readings and defects into the CMMS or compliance system of record so nothing is re-keyed.
Before You Switch
What Auditors and QHSE Teams Ask
Can it produce a scored, defensible travelator audit pack?
Yes. Each audit scores against the rubric, every finding carries photo evidence and a timestamp, and a branded pack exports in one click with the full trail a reviewer expects.
How are non-conformances tracked to closure?
Each becomes a corrective action with a severity, an owner, and a deadline, and stays open until a named approver verifies the fix with proof.
Can we compare audit results over time and across sites?
Because each audit scores against the same rubric with enforced definitions, trend and cross-site comparison are genuinely comparable rather than subjective.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Travelator Audit Off Paper?
Inspections Across Industries
View All
Which Travelator Audit Templates Should You Start With?
Get started with inspection and audit checklist templates.
Inspections
Site Inspection Checklist
Standard site-level inspections for construction, safety, and compliance. Capture conditions, photos, and follow-ups in one place.
41,000+GET
Asset Management
Asset Inspection Checklist
Inspect assets and equipment: condition, location, photos, and maintenance history. Track condition over time.
28,900+GET
Work Orders
Work Order Checklist
Complete work orders with checklist items, photos, and sign-off. Track completion and proof of work.
31,800+GET
Maintenance
Maintenance Checklist
Preventive and corrective maintenance inspections. Log repairs, parts, and condition with photos and follow-ups.
27,400+GET
Frequently Asked Questions About Travelator Audit Software
What does Travelator Audit Software check on a travelator audit?
Travelator Audit Software runs a scored travelator audit against BS EN 115, checking pallet band and comb plates, handrail speed and condition, brakes and safety devices, drive and chain, and incline, lighting, and signage. Each finding is logged with a photo, a severity, and the point it fails, then routed to an owner with a deadline. It stays open until a reviewer verifies the fix, so the audit becomes a traceable evidence pack for fm engineering managers rather than an ageing spreadsheet. Because scoring is built into the template, two sites assessed by two people produce numbers you can compare fairly.
How often should a travelator audit be done?
How often travelator checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Travelator Audit Software sets the cadence per site, reminds fm engineering managers before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset. Travelator Audit Software is the mobile tool FM Engineering Managers use to run travelator audits across every facilities management site from one app.
Which travelator defects matter most, and what happens if they are missed?
The audit targets the travelator failures that matter most: worn comb or damaged pallet, handrail speed mismatch, brake or safety device fault, and chain wear. Left unchecked, a fault such as worn comb or damaged pallet can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so fm engineering managers fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Travelator Audit Software support for travelator work?
Travelator Audit Software keeps travelator checks aligned to BS EN 115. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, fm engineering managers export a branded evidence pack built from safety device test note, pallet and comb photo, and brake check record, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run travelator checks offline and across multiple sites?
Yes. Travelator Audit Software is offline-first: teams complete travelator checks on iOS or Android with no signal, capturing safety device test note, pallet and comb photo, and brake check record in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So fm engineering managers get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a travelator audit was completed?
Every completed travelator audit carries safety device test note, pallet and comb photo, and brake check record, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, fm engineering managers can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: