Take a Photo. AI Fills the Form
Your inspector takes a photo of any asset or defect. AI reads it and fills the inspection form automatically. No typing. No manual entry.
Quality & Compliance
Travelator ComplianceSoftware
Plan and score travelator compliance, capture evidence against every requirement, turn findings into tracked corrective actions, and produce audit-ready reports, all in one workflow.
InspectWrk is the software we provide to run this audit workflow. It is mobile-first, offline-capable, and built so every record holds up as evidence.
Works OfflineiOS & AndroidFree Setup & Onboarding
4.5/5TrustpilotBased on 3,987 reviews
The problem this software solves
Worn comb or damaged pallet
Reported by voice or chat, worn comb or damaged pallet is caught late and logged with no evidence tied to the asset.
Handrail speed mismatch
Handrail speed mismatch goes unrecorded between rounds, so there is no proof it was found, owned, or fixed.
Brake or safety device fault
On a manual round brake or safety device fault is easy to miss, and hard to defend to an auditor after the fact.
Chain wear
Chain wear lands in a photo thread with no owner, deadline, or audit trail behind it.
How the software solves it
InspectWrk proves travelator compliance to the standard: map the requirements, check them, evidence each one, close gaps, and keep a defensible, always-ready record.
- 1
Map requirements
Turn the travelator requirements into a structured checklist tied to the standard.
- 2
Check
Complete each requirement on mobile with evidence attached at the point of work.
- 3
Evidence
Every record carries inspector identity, timestamp, and required photos.
- 4
Gap
A missed requirement becomes an owned action with a deadline.
- 5
Remediate
Actions stay open until verified, so gaps do not persist between audits.
- 6
Certify
Evidence packs export per site in the format the authority accepts.
Workflow
How Does a Travelator Compliance Programme Run from Field Capture to Leadership Reporting?
The audit workflow, end to end: Plan → Assess & score → Capture evidence → Record findings → Corrective action → Verify closure → Report. Every step happens on one system, so nothing falls between the field and the office.
- 1
Configure the Travelator Compliance Check Template
On every travelator compliance cycle, your travelator controls become a mobile template with required photos and readings on pallet band and comb plates, handrail speed and condition, brakes and safety devices, drive and chain, and incline, lighting, and signage, aligned to BS EN 115, so every site inspects to the same standard from day one.
- 2
Capture the Travelator Check in the Field
Inspectors complete the travelator compliance check on iOS or Android, offline where signal is poor, recording safety device test note, pallet and comb photo, and brake check record against each point before a named sign-off can close the round.
- 3
Route Travelator Findings to Verified Closure
In Facilities Management travelator compliance operations, A failed item such as worn comb or damaged pallet becomes an owned task with a severity and a deadline, and stays open until photo proof of the fix is reviewed, so travelator defects do not resurface unnoticed.
- 4
Report Travelator Performance
Every travelator compliance check feeds live dashboards and branded exports, so fm engineering managers see completion, overdue actions, and risk per site without assembling a report by hand.
Capabilities
What the software handles for travelator compliance
The capabilities that matter for this workflow, and what your team can do with each one.
Programme Scheduling and Statutory Clocks
In Facilities Management travelator compliance operations, every travelator compliance due date, renewal, and re-inspection sits on one calendar, so a lapsed certificate is caught before it expires, not after.
Structured Field Capture
Across the travelator compliance portfolio, required-field travelator compliance capture means no skipped questions and no missing evidence, even when the round is rushed.
AI-assisted Evidence Capture
On travelator compliance programmes, image recognition pre-tags travelator compliance findings, so a Facilities Management inspector spends time judging risk rather than writing it up.
Portfolio Dashboards
For travelator compliance field teams, FM Engineering Managers track travelator compliance risk hotspots and SLA breaches as they happen, instead of waiting for a manual Friday summary.
Audit-ready Exports
Across multi-site travelator compliance rounds, travelator Compliance evidence exports as a regulator-ready pack with photos and sign-offs intact, filtered to the site under review.
Offline-first Mobile Apps
Where travelator compliance evidence has to hold up, weak-signal sites stop being an excuse for missing travelator compliance evidence, because capture and sync are decoupled on mobile.
Coverage
What Does a Travelator Compliance Check Cover?
Travelator compliance evidences the required checks on pallet band and comb plates, handrail speed and condition, brakes and safety devices, drive and chain, and incline, lighting, and signage. The photos and readings each travelator rule expects are mandatory fields. Travelator renewals are flagged before they lapse. So travelator compliance stays a documented fact, not an assurance.
What Gets Checked
- Pallet band and comb plates
- Handrail speed and condition
- Brakes and safety devices
- Drive and chain
- Incline, lighting, and signage
Common Defects It Surfaces
- Worn comb or damaged pallet
- Handrail speed mismatch
- Brake or safety device fault
- Chain wear
- Lighting or signage fault
Evidence Captured
- Safety device test note
- Pallet and comb photo
- Brake check record
Records align toBS EN 115
One Platform. Mobile-First. AI-Powered.
Manage every checklist in one connected workspace, capture evidence on mobile at the point of work, and let AI turn field inputs into clear, stakeholder-ready reports in minutes.
Collaborate
Collaborate with your team anytime, anywhere
See which checklists your team has in progress across every site, jump into the same inspection with one tap, and keep field, supervisor, and back-office views in sync without sending screenshots on WhatsApp.
- Organise inspection data by site, team, and date
- Assign checks to the inspector or vendor responsible
- Track completion across every location in one view
- Keep field and back-office in sync in real time
- Comment on findings without leaving the inspection
Custom Reports
Custom reports that guide your decision making
Every team reports differently. Build the report your operations, quality, or compliance leads actually want to read, share it as a branded PDF, and schedule delivery to the stakeholders who need it.
- Branded PDF and CSV export from any completed inspection
- Schedule weekly or monthly delivery to managers and clients
- Share to email, Drive, Teams, or Slack in one click
- Filter findings by site, severity, or corrective-action status
Powerful Analytics
Analyse your inspection data with confidence
See completion, pass rate, and recurring findings across every checklist and every site, without pulling spreadsheets together at the end of the month.
AI-Powered Features for Your Field Workflows
Everything your field team does on paper, InspectWrk does automatically: faster, more accurate, and without the admin.
Speak. AI Writes It Down.
Inspectors speak their observations in any language. AI transcribes and fills the form in real time. Completely hands-free in the field.
Inspections Done. Report Ready.
The moment an inspection is submitted, a branded PDF, Excel, or CSV report generates automatically. No manual work. No waiting.
Connect Your Existing Tools.
InspectWrk integrates with the tools your team already uses, including Zoho, Microsoft 365, and SAP. No double entry.
Live Dashboard. Every Site. Always On.
Your operations team sees completion rates, open issues, and compliance scores across all sites in real time. No chasing updates.
Outcomes
What changes for your team
FM Engineering Managers
A live view of travelator compliance check status across every site, with defensible evidence and no Friday report assembly.
Field teams
Guided travelator checks on mobile with offline capture, so worn comb or damaged pallet is caught and logged on the spot.
Compliance stakeholders
Searchable travelator history and BS EN 115-ready exports available on demand.
Who it's for
Operations and site managers
Own performance and audit readiness across sites.
Field teams and inspectors
Complete guided checks in the field, offline where needed.
QHSE and compliance teams
Retrieve evidence the moment an auditor or client asks.
Multi-site operations leaders
Compare sites and spot recurring risk without spreadsheets.
Facilities Management teams
Standardise on one workflow across every location.
Fits how your team already works
Your systems of record
System of record
ERP / WMS / CMMS · Existing spreadsheets · Current reporting
InspectWrk
Inspection and evidence layer
Inspections · Condition evidence · Corrective actions · Compliance clocks
Managers, clients, and auditors
Outputs
Live dashboards · Evidence packs · Audit-ready reports
Comparison
Paper and spreadsheets vs InspectWrk
Where paper and spreadsheets fall short against InspectWrk on the travelator compliance job.
| Capability | Paper / spreadsheets | With InspectWrk |
|---|---|---|
| Requirement coverage | Travelator requirements such as pallet band and comb plates are tracked in a spreadsheet, so it is unclear what is covered and what is overdue. | Each requirement is a structured check tied to the standard, with a clear covered / due / overdue status. |
| Evidence chain | Proof of a check such as worn comb or damaged pallet sits across drives and email with no chain of custody. | Every record carries inspector, timestamp, asset, and required photos as an audit-grade chain. |
| Documentation | Documents live in filing cabinets and personal inboxes. | Records are searchable and retrievable per site, per asset, and per requirement. |
| Standard traceability | Mapping a record back to the specific BS EN 115 clause is manual and error-prone. | Each check maps to its requirement aligned to BS EN 115, so traceability is built in. |
| Renewal and defensibility | Renewals lapse silently and the pack is assembled under pressure. | Statutory clocks alert before each renewal, and the compliance pack is always ready. |
Rollout
How Should Teams Pilot Digital Travelator Compliance Workflows Before Portfolio Rollout?
Pilot on one site cluster
Run the first travelator compliance cycle on one site cluster and compare it to your current process on capture speed, evidence completeness, and overdue actions before scaling.
Scale templates and roles
As more facilities management sites come on, give each role the travelator compliance views they need and align every template to the codes FM Engineering Managers answer for.
Connect reporting and integrations
Publish travelator compliance performance to portfolio dashboards, export branded audit packs, and integrate with the facilities management systems that own work orders and records.
Before You Switch
What Compliance Teams Ask
Can it prove travelator compliance to an auditor?
Yes. Every record carries inspector identity, a timestamp, asset confirmation, and required photos, and evidence packs export per site in the format the authority accepts.
How do we stop renewals lapsing?
Statutory clocks track each renewal date and alert 30, 60, and 90 days ahead, so nothing lapses quietly and the pack is ready before it is requested.
Can we trace a record back to the requirement it satisfies?
Each check maps to its requirement, so traceability to the standard is built into the record rather than reconstructed by hand.
Reviews From Real People
4.5/5TrustpilotBased on 3,987 reviews
What our
customers are
saying
“InspectWrk transformed how we manage site safety inspections. The offline capability alone saved us countless hours. Our compliance rate jumped from 72% to 96% in just three months.”
Sarah Mitchell
Meridian Construction Group
“The AI-powered defect detection has changed how we work. Our inspectors capture photos and the system flags issues we'd have missed. It's like having an expert reviewer on every site visit.”
James Chen
Pacific Manufacturing Co.
“Rolling out digital checklists across multiple projects gave us instant visibility into recurring safety issues. We now resolve critical findings in hours instead of days.”
Olivia Carter
Northbridge Infrastructure
Ready to Move Travelator Compliance Off Paper?
Inspections Across Industries
View All
Which Travelator Compliance Templates Should You Start With?
Get started with inspection and audit checklist templates.
Inspections
Site Inspection Checklist
Standard site-level inspections for construction, safety, and compliance. Capture conditions, photos, and follow-ups in one place.
41,000+GET
Asset Management
Asset Inspection Checklist
Inspect assets and equipment: condition, location, photos, and maintenance history. Track condition over time.
28,900+GET
Work Orders
Work Order Checklist
Complete work orders with checklist items, photos, and sign-off. Track completion and proof of work.
31,800+GET
Maintenance
Maintenance Checklist
Preventive and corrective maintenance inspections. Log repairs, parts, and condition with photos and follow-ups.
27,400+GET
Frequently Asked Questions About Travelator Compliance Software
What does Travelator Compliance Software check on a travelator compliance check?
Travelator Compliance Software keeps travelator compliance current by evidencing pallet band and comb plates, handrail speed and condition, brakes and safety devices, drive and chain, and incline, lighting, and signage. The photos and readings each rule expects are mandatory fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. Renewals and statutory due dates are flagged before they lapse. When an assessor asks, fm engineering managers export a branded, audit-ready pack and full history for the site in scope in seconds, not after days of digging through folders.
How often should a travelator compliance check be done?
How often travelator checks run depends on duty, risk, and the standard you follow. Some are daily or pre-use; others run weekly, monthly, or at a statutory interval. Travelator Compliance Software sets the cadence per site, reminds fm engineering managers before a round is due, and flags anything overdue automatically. Each completed round is timestamped and signed, so the schedule is provably kept rather than assumed, and you can show exactly when the last check happened for any asset. In facilities management, Travelator Compliance Software turns approved travelator checklists into mobile checks field teams complete on any device.
Which travelator defects matter most, and what happens if they are missed?
The compliance check targets the travelator failures that matter most: worn comb or damaged pallet, handrail speed mismatch, brake or safety device fault, and chain wear. Left unchecked, a fault such as worn comb or damaged pallet can mean downtime, a safety incident, or a failed audit, so every finding becomes an owned task with a deadline. It stays open until photo proof of the repair is reviewed, and repeat problems are flagged so fm engineering managers fix the cause rather than the symptom. Prioritising by severity means the most serious issues are handled first, not whichever was reported loudest.
Which standards does Travelator Compliance Software support for travelator work?
Travelator Compliance Software keeps travelator checks aligned to BS EN 115. The photos and readings each standard expects are required fields, so an incomplete check cannot be closed and a gap is caught before an assessor finds it. When a review is due, fm engineering managers export a branded evidence pack built from safety device test note, pallet and comb photo, and brake check record, ready to hand over on the spot. Retention and history stay searchable, so proof remains defensible at any point, not only on the day of an audit.
Can teams run travelator checks offline and across multiple sites?
Yes. Travelator Compliance Software is offline-first: teams complete travelator checks on iOS or Android with no signal, capturing safety device test note, pallet and comb photo, and brake check record in the field. Each record syncs automatically when the connection returns, with its timestamp intact, and the same template runs on every site. So fm engineering managers get a live view of what is complete, overdue, or failing per location, and a weak connection in a plant room or basement never costs a round or loses a photo.
What evidence proves a travelator compliance check was completed?
Every completed travelator compliance check carries safety device test note, pallet and comb photo, and brake check record, a GPS location, a timestamp, and a named sign-off. Because the evidence is captured during the round rather than typed up afterwards, fm engineering managers can show exactly what was checked, when, and by whom. When an assessor or client asks, the record exports in seconds as a branded PDF or a searchable history, so proof never depends on someone remembering where a photo was saved or which folder holds last quarter's records.
Last updated: